CrMnFeCoNi coating was produced on the X65 steel substrate by the arc cladding method. The microstructure and chemical composition of the coating were explored. The results reveal that the CrMnFeCoNi coating exhibited a single-phase structure. The corrosion behaviour of the coating was investigated by the electrochemical test in NaCl solution (3.5 wt-%). The results show that the CrMnFeCoNi coating possessed lower corrosion current density and higher charge transfer resistance than the X65 steel. The superior corrosion resistance of the CrMnFeCoNi coating compared to the X65 steel substrate was due to the formation of the protective passive film. The coating effectively improved the corrosion resistance of the X65 steel substrate.
25 October 2018 in Corrosion Engineering, Science and Technology: The International Journal of Corrosion Processes and Corrosion Control
This work evaluates the microstructure and corrosion behaviour of Al coating deposited by cold spraying onto FSW AA2219 alloy. The results showed that a dense coating could be deposited on the FSW joint surface with low porosity (0.77%). XRD analysis indicated that no new phases were formed during the spraying. Refined grains were observed in the coating as expected by SEM results. Electrochemical tests revealed the coating had positive corrosion resistance performance. Immersion tests confirmed that the coating effectively withstood the corrosion attack in an aggressive environment and a typical intergranular corrosion can be observed in the surface of the coating particles.
1 July 2018 in Journal of Physics: Conference Series