Erik Stenvall

Dr. Erik Stenvall


Research Focus & Metrics

Academic Career Length

11Years (2016-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
25 January 2016 in Recycling
Verified
Journal Article
Open access
PDF file
STSandra Tostar
Sandra Tostar
ESErik Stenvall
Erik Stenvall
MFMark Russell StJohn Foreman
Mark Russell StJohn Foreman
ABAntal Boldizar
Antal Boldizar
Waste electrical and electronic equipment (WEEE) is growing rapidly, and the plastics within WEEE have an important role in fulfilling the recovery and recycling targets defined in the European WEEE Directive. This study considers recycling of WEEE plastics by making a blend of the different plastics instead of separating them. The mechanical and thermal properties can be enhanced by adding a compatibilizer. It was found that one compatibilizer, a styrene-b(ethylene-co-butylene)-b-styrene (SEBS) copolymer named Kraton® G1652 E, had a large impact on the ductility of the recycled WEEE plastics blend. By adding 2.5 weight % (wt%) of this copolymer, the elongation at break increased by more than five times compared with the non-compatibilized samples, with only a small decrease in stiffness and strength. The storage modulus (G’) decreased slightly with increasing compatibilizer amounts while the impact strength increased with increasing amounts of compatibilizer, from 2.1 kJ/m2 (reference material) to 3.6 kJ/m2 (5 weight % (wt%) compatibilizer). It was found that Kraton® FG1901 E (styrene-b(ethylene-co-butylene)-b-styrene (SEBS) grafted with maleic anhydride (MAH)), Royaltuf® 372P20 (styrene acrylonitrile (SAN) modified with ethylene-propylene-diene elastomers (EPDM)) and Fusabond® P353 (polypropylene (PP) with a high degree of grafted MAH) were ineffective as compatibilizers to the blend. Gamma irradiation (50 kGy) did not improve the mechanical properties however: the impact strength of the gamma-irradiated samples was lower than that of the non-irradiated samples.

5 January 2016 in Recycling
Verified
Journal Article
Open access
PDF file
ESErik Stenvall
Erik Stenvall
ABAntal Boldizar
Antal Boldizar
A melt-blended and melt-filtered real post-consumer and recyclable waste electrical and electronic equipment plastics blend (WEEEBR) was studied, where the WEEEBR contained mainly acrylonitrile-butadiene-styrene copolymer (~40 wt %), high impact polystyrene (~40 wt %) and polypropylene (~10 wt %). The main aim was to better understand the influence of different reprocessing conditions on the mechanical and thermal properties of WEEEBR and to compare these properties with the corresponding properties of model material blends of samples from single screw extrusion, twin screw extrusion and injection molding. For all the reprocessing alternatives studied, WEEEBR was found to be processable and an acceptable surface character could be obtained within narrow processing condition windows. It was found in particular that the reprocessing conditions influenced the elongation at break of WEEEBR, and to a lesser extent also the width of the polypropylene melting temperature region. The highest yield stress and elongation at break of WEEEBR was obtained after twin-screw extrusion at low barrel temperatures (180–200 °C) and a low screw rotation rate (60 rpm). Injection molding produced brittle materials with low impact strength, possibly due to molecular orientation effects.