The weak inherent non-covalent interactions between carbon aerogel backbone nanoparticles obtained by the pyrolysis of conventional organic aerogel can lead to poor mechanical properties. When applied in the thermal protection system of a high-speed spacecraft, the preparation of carbon aerogel insulation materials with excellent formability and high mechanical strength still remains a huge challenge. This work reports an efficient approach for fabricating carbon foam-reinforced carbon aerogel composites by compounding the nanoporous polyimide aerogel into the microporous pre-carbonized phenolic resin-based carbon foam via vacuum impregnation, gelatinizing and co-carbonization. Benefiting from the co-shrinkage caused by co−carbonization, the thermal insulation capacity of the carbon aerogel and the formability of the pre−carbonized foam are efficiently utilized. The shrinkage, density and carbon yield of aerogels, pre-carbonized foams and the composites at different temperatures were measured to analyze the formation of the interfacial gap within the composite. The co-carbonization mechanism of the polyimide aerogels and phenolic resin-based pre-carbonized foams was analyzed through XPS, TG-MS, and FT-IR. Among the prepared samples, CF30-CPI-1000 °C with small interfacial gaps showed the lowest thermal conductivity, which was as low as 0.56 W/(m·K) at 1900 °C, and the corresponding compressive strength and elastic modulus were as high as 0.532 MPa and 9.091 MPa, respectively.
1 January 2022 in Journal of Colloid and Interface Science
Mesophase pitch is regarded as a profoundly promising candidate for the production of advanced carbon-based multifunctional materials such as carbon fibers, carbon microspheres, and carbon foams owing to its excellent intrinsic properties. Consequently, a deeper understanding of pyrolytic chemistry is indispensable for the efficient and environmentally friendly utilization of mesophase pitch. In this study, details about the structure compositions and microscopic morphologies of petroleum-driven mesophase pitch (pMP) were investigated through ultimate, FTIR, XPS, and 13C-NMR analyses. Furthermore, a large-scale molecular model of typical pMP with 11,835 atoms was constructed to unveil the comprehensive pyrolysis behaviors and the underlying reactions. Significantly, the evolution of specific chemical bonds and the decomposition of crucial molecular fragments were elucidated within an amalgamation of experimental TG-FTIR/MS and ReaxFF MD simulation. Accordingly, three fundamental reaction stages were artificially divided, including the low-temperature reaction, rapid thermal decomposition, and the molecular condensation reaction. During the rapid thermal decomposition stage, the cleavages of C–C and C–O bonds cooperatively contributed to the formation of C2H4 and H2O gaseous products. As the temperature escalated to the molecular condensation stage, the pyrolysis process was governed by the dehydrogenation condensation, accompanied by an augmentation of C–C and H–H bonds and a diminution of C–O and C–H bonds. Additionally, the rare graphitization phenomenon was observed, suggesting a remarkable degree of structural organization in pMP. Overall, the results of ReaxFF MD simulations complement experimental observations, successfully reproducing the microstructure of pMP and atomic-scale pyrolysis behavior, thereby providing invaluable insights for the rational guidance of efficient utilization of pMP and other related carbonaceous precursors.