As one of the most promising new energy sources, the lithium-ion battery (LIB) and its associated safety concerns have attracted great research interest. Herein, a comprehensive review on the thermal hazards of LIBs and the corresponding countermeasures is provided. In general, the thermal hazards of the LIB can be caused or aggravated by several factors including physical, electrical and thermal factors, manufacturing defect and even battery aging. Due to the activity and combustibility of traditional battery components, they usually possess a relatively high thermal hazard and a series of side reactions between electrodes and electrolytes may occur under abusive conditions, which would further lead to the thermal failure of LIBs. Besides, the thermal hazards generally manifest as the thermal runaway behaviors such as high-temperature, ejection, combustion, explosion and toxic gases for a single battery, and it can even evolve to thermal failure propagation within a battery pack. To decrease these hazards, some countermeasures are reviewed including the application of safety devices, fire-retardant additives, battery management systems, hazard warnings and firefighting should a hazard occur.

The purpose of a battery thermal management system (BTMS) is to maintain the battery safety and efficient use as well as ensure the battery temperature is within the safe operating range. The traditional air-cooling-based BTMS not only needs extra power, but it could also not meet the demand of new lithium-ion battery (LIB) packs with high energy density, while liquid cooling BTMS requires complex devices to ensure the effect. Therefore, phase change materials (PCMs)-based BTMS is becoming the trend. By using PCMs to absorb heat, the temperature of a battery pack could be kept within the normal operating range for a long time without using any external power. PCMs could greatly improve the heat dissipation efficiency of BTMS by combining with fillers such as expanded graphite (EG) and metal foam for their high thermal conductivity or coordinating with fins. In addition, PCMs could also be applied in construction materials, solar thermal recovery, textiles and other fields. Herein, a comprehensive review of the PCMs applied in thermal storage devices, especially in BTMS, is provided. In this work, the literature concerning current issues have been reviewed and summarized, while the key challenges of PCM application have been pointed out. This review may bring new insights to the PCM application.

Polymer/graphene-analogous nanosheet composites have great potential for improving their physical and mechanical properties during the past few years. Herein, ultrathin molybdenum disulfide (MoS₂) nanosheets were simultaneously exfoliated and non-covalently modified by ultrasonication in an aqueous solution of chitosan. The chitosan-modified MoS₂ (CS-MoS₂) nanosheets were then transferred from the aqueous solution to tetrahydrofuran by a simple solvent-exchange method for the fabrication of epoxy (EP) nanocomposites. Transmission electron microscopy and scanning electron microscopy were performed to display the homogeneous dispersion of CS-MoS₂ in an EP matrix. On incorporating 2 wt% CS-MoS₂ into an EP matrix, EP nanocomposites exhibited reductions of up to 43.3% and 14.6% in peak heat-release rate and total heat release derived from cone calorimeters compared to those of neat EP, respectively. Moreover, toxic volatiles, such as hydrocarbons, aromatic compounds and CO, that escaped from the flaming EP nanocomposites were decreased compared to that of neat EP, demonstrating the higher smoke safety. Combined with the analyses of char residues and thermal stability of EP nanocomposites, the reduced fire hazards of EP nanocomposites could be attributed to the nano-barrier effects of MoS₂, which could effectively inhibit the release of combustible gas to support burning and restrain the effusion of volatile toxic substances that cause the majority of deaths in fires.