Matthew R. Dvorsky

Dr. Matthew R. Dvorsky


Research Focus & Metrics

Academic Career Length

7Years (2020-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
14 September 2020 in Philosophical Transactions of the Royal Society A: Mathematical, Physical and Engineering Sciences
Verified
Journal Article
Closed access
KBKatelyn Brinker
Katelyn Brinker
MDMatthew R. Dvorsky
Matthew R. Dvorsky
MQMohammad Tayeb Al Qaseer
Mohammad Tayeb Al Qaseer
RZReza Zoughi
Reza Zoughi
Microwave and millimetre-wave non-destructive testing and evaluation (NDT&E) has a long history dating back to the late 1950s (Bahr 1982 Microwave non-destructive testing methods ; Zoughi 2000 Microwave Non-destructive testing and evaluation principles ; Feinstein 1967 Surface crack detection by microwave methods ; Ash 1973 In 3rd European Microwave Conference ; Auld 1981 Phys. Technol. 12 , 149–154; Case 2017 Mater. Eval. 75 ). However, sustained activities in this field date back to the early 1980s (Zoughi 1995 Res. Nondestr. Eval. 7 , 71–74; Zoughi 2018 Mater. Eval. 76 , 1051–1057; Kharkovsky 2007 IEEE Instrumentation & Measurement Magazine 10 , 26–38). Owing to various limitations associated with using microwaves and millimetre waves for NDT&E, these techniques did not see much utility in the early days. However, with the advent and prevalence of composite materials and structures, in a wide range of applications, and technological advances in high-frequency component design and availability, these techniques are no longer considered as ‘emerging techniques’ (Zoughi 2018 Mater. Eval. 76 , 1051–1057; Schull 2002 Nondestructive evaluation: theory, techniques, and applications ). Currently, microwave and millimetre-wave NDT&E is a rapidly growing field and has been more widely acknowledged and accepted by practitioners over the last 25+ years (Case 2017 Mater. Eval. 75 ; Bakhtiari 1994 IEEE Trans. Microwave Theory Tech . 42 , 389–395; Bakhtiari 1993 Mater. Eval. 51 , 740–743; Bakhtiari 1993 IEEE Trans. Instrum. Meas. 42 , 19–24; Ganchev 1995 IEEE Trans. Instrum. Meas. 44 , 326–328; Bois 1999 IEEE Trans. Instrum. Meas. 48 , 1131–1140; Ghasr 2009 IEEE Trans. Instrum. Meas. 58 , 1505–1513). Microwave non-destructive testing was recently recognized and designated by the American Society for Nondestructive Testing (ASNT) as a ‘Method’ on its own (Case 2017 Mater. Eval. 75 ). These techniques are well suited for materials characterization; layered composite inspection for thickness, disbond, delamination and corrosion under coatings; surface-breaking crack detection and evaluation; and cure-state monitoring in concrete and resin-rich composites, to name a few. This work reviews recent advances in four major areas of microwave and millimetre-wave NDT&E, namely materials characterization, surface crack detection, imaging and sensors. The techniques, principles and some of the applications in each of these areas are discussed. This article is part of the theme issue ‘Advanced electromagnetic non-destructive evaluation and smart monitoring’.

4 March 2020 in IEEE Transactions on Instrumentation and Measurement
Verified
Journal Article
Closed access
MDMatthew R. Dvorsky
Matthew R. Dvorsky
MQMohammad Tayeb Al Qaseer
Mohammad Tayeb Al Qaseer
RZReza Zoughi
Reza Zoughi
A microwave crack detection method using circularly-polarized SAR imaging is described. The advantages of circular over linear polarization, mainly that the crack detection is not dependent on the relative orientation of the crack, is discussed. A technique to extract the orientation of a detected crack using SAR images is presented, where the phase difference between the left-hand and right-hand circularly-polarized images is used for this purpose. The orientation estimation error introduced by a non-zero crack width is discussed and demonstrated through simulation, and a technique to overcome this error is proposed and demonstrated. The effect of axial ratio on orientation error is also studied. Subsequently, a dual-circularly-polarized antenna was designed, fabricated, and used to image several metal samples containing narrow EDM notches and real cracks, by which the detection and orientation estimation techniques are successfully demonstrated.

18 August 2023 in IEEE Transactions on Instrumentation and Measurement
Verified
Journal Article
Closed access
MDMatthew R. Dvorsky
Matthew R. Dvorsky
SSSi Yuan Sim
Si Yuan Sim
DMDoyle T. Motes
Doyle T. Motes
TWTrevor Watt
Trevor Watt
ASAjay Shah
Ajay Shah
RZReza Zoughi
Reza Zoughi
This paper presents a multi-static or multiple input output (MIMO) antenna array millimeter wave imaging system operating in the Ka-band (26.5-40 GHz) frequency range. This imaging system consists of eight 1-D arrays each containing 32 transmitters and 32 receivers for a total of 256 transmitting and 256 receiving antennas, each of which is independently addressable. By scanning the imaging system over a 1-D line path, a dense multi-static imaging aperture can be synthesized and used to generate high-resolution (sub-wavelength) 3-D synthetic aperture radar (SAR) images in the near-field of the array. In this work, the design of the imaging system is detailed, including the 1-D linear array layout, the antenna element design, and various other supporting components. The imaging methodology used to create SAR images is detailed as well. The calibration process used to calibrate the imaging system is explained, and some relevant calibration results are shown. Subsequently, several imaging experiments are performed, the results of which demonstrate the capabilities of this multi-static imaging system. These SAR images specifically showcase the effectiveness of multi-static SAR measurements for near-field imaging. Additionally, several experiments are performed to showcase the utility of the imaging system for nondestructive testing (NDT) and security inspection purposes.

25 June 2020 in IEEE Transactions on Instrumentation and Measurement
Verified
Journal Article
Closed access
MDMatthew R. Dvorsky
Matthew R. Dvorsky
MQMohammad Tayeb Al Qaseer
Mohammad Tayeb Al Qaseer
RZReza Zoughi
Reza Zoughi
A polarimetric 3D SAR imaging method using a radially-polarized antenna is described. The advantages of the radially-polarized antenna, mainly that polarimetric SAR imaging can be performed without requiring additional measurements compared to traditional SAR, is discussed. A general target model is developed that includes information about target orientation and degree of polarization (i.e., how well and in what direction the target polarizes a signal). Image reconstruction algorithms were developed to allow polarimetric imaging to be performed with radially-polarized antenna imaging data, enabling the estimation of target orientation and degree of polarization. The effect of scan step size and scan aperture size is studied on the accuracy of the estimation of these parameters, and guidelines were established as to the proper step size and scan aperture size to be used to keep estimation error below a specific threshold. Subsequently, a radially-polarized antenna was designed, fabricated, and used to image several samples containing various types of point targets, by which the capability of this technique to enable accurate estimation of target orientation and degree of polarization is successfully demonstrated.

20 June 2022 in IEEE Open Journal of Instrumentation and Measurement
Verified
Journal Article
Open access
MDMatthew R. Dvorsky
Matthew R. Dvorsky
DMDaniela Munalli
Daniela Munalli
MQMohammad Tayeb Al Qaseer
Mohammad Tayeb Al Qaseer
RZReza Zoughi
Reza Zoughi
In this paper synthetic aperture radar (SAR) polarimetry techniques are applied to detect and characterize fiber misalignment in both carbon fiber sheets and glass fiber reinforced polymer (GFRP) composites. The principle behind SAR polarimetry technique to characterize fiber orientation is described, making use of the fact that carbon and glass fibers are polarizing when irradiated with a microwave signal. The difficulties in using 2D polarimetry techniques to make the 3D orientation measurements, required to characterize out-of-plane fiber misalignment, are discussed as well. Subsequently, the feasibility of a recently-developed 3D SAR polarimetry method for this purpose is demonstrated. Several carbon fiber sheet and glass fiber reinforced polymer (GFRP) samples were manufactured with both in-and out-of-plane fiber misalignment. Polarimetric SAR images of the samples were then produced to show the spatially-varying relative orientation (both in-plane and out-of-plane) of the fibers for each sample. These images can be used to both detect and characterize any fiber misalignment, successfully demonstrating the potential for SAR polarimetry as a tool for the inspection of carbon and glass fiber reinforced composites.

29 May 2023 in IEEE Open Journal of Instrumentation and Measurement
Verified
Journal Article
Open access
MDMatthew R. Dvorsky
Matthew R. Dvorsky
MQMohammad Tayeb Al Qaseer
Mohammad Tayeb Al Qaseer
RZReza Zoughi
Reza Zoughi
In this paper, an exact formulation is derived for the mode reflection coefficient (and in general the full S-parameter matrix) for a circular waveguide radiating into a multilayered structure and when excited with any combination of axially-symmetric modes (i.e., modes of the form TE0m and TM0m, where.... is a positive integer). This formulation solves for the fields in the waveguide, including fields resulting from higher-order evanescent modes, using Fourier analysis. This leads to an accurate calculation of the mode S-parameter matrix, which includes the reflection coefficient of each excited mode. The derived formulations were validated through comparison to those computed using full-wave 3D electromagnetic simulations. Additional simulations demonstrated the effect of considering higher-order modes on the results. The effect of having a finite flange and sample size on the complex reflection coefficient was also shown through 3D simulations, indicating the relative insensitivity of the TE01 probe to edge effects. Reflection coefficient measurements, using a circular waveguide probe with the TE01 mode, were performed to experimentally verify the accuracy of the formulations. Forward-iterative optimization (i.e., optimal curve fitting) techniques were then performed on the reflection coefficient measurements to demonstrate the efficacy of this method for accurately estimating the thickness and complex permittivity of thin dielectric layers.