The depletion of petroleum-based resources and the adverse environmental problems, such as pollution, have stimulated considerable interest in the development of environmentally sustainable materials, which are composed of natural fiber–reinforced polymer composites. These materials could be tailored for a broad range of sustainable industrial applications with new surface functionalities. However, there are several challenges and drawbacks, such as composites processing production and fiber/matrix adhesion, that need to be addressed and overcome. This review could provide an overview of the technological challenges, processing techniques, characterization, properties, and potential applications of NFRPC for sustainable industrial applications. Interestingly, a roadmap for NFRPC to move into Industry 4.0 was highlighted in this review.

The development of antimicrobial packaging has been growing rapidly due to an increase in awareness and demands for sustainable active packaging that could preserve the quality and prolong the shelf life of foods and products. The addition of highly efficient antibacterial nanoparticles, antifungals, and antioxidants to biodegradable and environmentally friendly green polymers has become a significant advancement trend for the packaging evolution. Impregnation of antimicrobial agents into the packaging film is essential for impeding or destroying the pathogenic microorganisms causing food illness and deterioration. Higher safety and quality as well as an extended shelf life of sustainable active packaging desired by the industry are further enhanced by applying the different types of antimicrobial packaging systems. Antimicrobial packaging not only can offer a wide range of advantages, but also preserves the environment through usage of renewable and biodegradable polymers instead of common synthetic polymers, thus reducing plastic pollution generated by humankind. This review intended to provide a summary of current trends and applications of antimicrobial, biodegradable films in the packaging industry as well as the innovation of nanotechnology to increase efficiency of novel, bio-based packaging systems.

The manufacturing industry has undergone numerous revolutions over the years, with a unanimous acceptance of the greater benefits of being sustainable. The present industrial wave—Industry 4.0—by using its enabling technologies and principles holds great potential to develop sustainable manufacturing paradigms which require balancing out the three fundamental elements —products, processes, and systems. Yet, numerous stakeholders, including industrial policy and decision makers, remain oblivious of such potential and requirements. Thus, this bibliometric study is aimed at presenting an overview of the broad field of research on the convergence of sustainable manufacturing and Industry 4.0 under the umbrella of “Sustainable Manufacturing 4.0”, which has yet to be developed. It includes the dissemination of original findings on pathways and practices of Industry 4.0 applied to the development of sustainable manufacturing, contributing a bibliometric structure of the literature on the aforementioned convergence to reveal how Industry 4.0 could be used to shift the manufacturing sector to a more sustainable-based state. An initial research agenda for this emerging area has accordingly been presented, which may pave the way for having a futuristic view on Sustainable Manufacturing 5.0 in the next industrial wave, i.e., Industry 5.0.

This paper investigates the barriers that hinder the implementation of lean manufacturing in wood and furniture industries as the adoption of this philosophy in such industries is not promising especially in emerging economies. To this end, a comprehensive review of the literature was performed to identify the barriers and develop a conceptual model. Next, structural equation modeling is employed to examine the model using the collected data from 131 wood and furniture companies. The findings revealed a synergetic effect between three key factors—culture and human attitude, knowledge, and resources—which play a crucial role in implementing lean. The analyses indicated the reasons of companies refused or not ready to implement lean on knowledge and culture and human attitudinal issues, particularly in companies that have limited resources. It is believed that resource issues are an obstacle to lean implementation, but not as important as knowledge and culture and human attitudinal issues. Sufficient knowledge is needed to deploy lean practices as well as changes in culture and human attitude. Investigating the relationships between these three key barriers is a contribution that this study intends to become a forward step for promoting lean manufacturing among under-studied industries. This paper also proposes that through adopting the activities for lean implementation, small and medium enterprises can experience and quantify the positive impacts of lean practices. Government agencies, universities, and professional bodies can support such enterprises in this transition through targeted interventions that address the barriers presented.

Purpose: This study analyses the challenges in implementing lean manufacturing (LM) in the wood and furniture industry. In order to facilitate the smooth implementation of LM practices in this industry, the challenges in terms of its deployment need to be analysed and observed.Design/methodology/approach: Realizing this importance, this study proposes a model, using PLS-SEM, which focusses on dealing with the challenges faced in the implementation of lean in the wood and furniture industry. The model consists of ten challenges that were determined based on a survey involving 46 SMEs companies in Malaysia.Findings: The findings revealed that the implementation of LM is significantly affected by three main issues, namely: knowledge, resources and culture and human attitude. Furthermore, the analyses also highlighted four dominant challenges which are related to culture and human attitude issues – lack of employee commitment, lack of senior management's interest and support, difficult to implement, and LM is viewed as “current trend”. Overall, the ability to deal with the challenges involving factors of knowledge and culture and human attitude determines the success of LM implementation, especially in companies that have limited resources.Practical implications: This study would help wood and furniture SMEs, government agencies, professional bodies and academics to better understand the challenges when implementing LM practices.Originality/value: Overall, this study aims at investigating the relationships between the three challenges to better promote LM in the scope under study. Therefore, several activities were proposed to overcome the abovementioned challenges and subsequently contribute to the current body of knowledge.

All-cellulose composite (ACC) films from oil palm empty fruit bunches (OPEFBs) were successfully fabricated through the surface selective dissolution of cellulose fibers in 8 wt% LiCl/DMAc via the solution casting method. The effect of dissolution time on the properties of the ACC films was assessed in the range of 5–45 min. The results showed that under the best conditions, there were sufficiently dissolved fiber surfaces that improved the interfacial adhesion while maintaining a sizable fraction of the fiber cores, acting as reinforcements for the material. The ACC films have the highest tensile strength and modulus of elasticity of up to 35.78 MPa and 2.63 GPa after 15 min of dissolution. Meanwhile, an X-ray diffraction analysis proved that cellulose I and II coexisted, which suggests that the crystallite size and degree of crystallinity of the ACC films had significantly declined. This is due to a change in the cellulose structure, which results in fewer voids and enhanced stress distribution in the matrix. Scanning electron microscopy revealed that the interfacial adhesion improved between the reinforcing fibers and matrices as the failure behavior of the film composite changed from fiber pullout to fiber breakage and matrix cracking. On the other hand, the thermal stability of the ACC film showed a declining trend as the dissolution time increased. Therefore, the best dissolution time to formulate the ACC film was 15 min, and the obtained ACC film is a promising material to replace synthetic polymers as a green composite.