Grain size analysis is a vital sedimentological tool used to unravel the hydrodynamic conditions, mode of transportation and deposition of detrital sediments. In this study, detailed grain-size analysis was carried out on thirty-five sandstone samples from the Ecca Group in the Eastern Cape Province of South Africa. Grain-size statistical parameters, bivariate analysis, linear discriminate functions, Passega diagrams and log-probability curves were used to reveal the depositional processes, sedimentation mechanisms, hydrodynamic energy conditions and to discriminate different depositional environments. The grain-size parameters show that most of the sandstones are very fine to fine grained, moderately well sorted, mostly near-symmetrical and mesokurtic in nature. The abundance of very fine to fine grained sandstones indicate the dominance of low energy environment. The bivariate plots show that the samples are mostly grouped, except for the Prince Albert samples that show scattered trend, which is due to the either mixture of two modes in equal proportion in bimodal sediments or good sorting in unimodal sediments. The linear discriminant function analysis is dominantly indicative of turbidity current deposits under shallow marine environments for samples from the Prince Albert, Collingham and Ripon Formations, while those samples from the Fort Brown Formation are lacustrine or deltaic deposits. The C-M plots indicated that the sediments were deposited mainly by suspension and saltation, and graded suspension. Visher diagrams show that saltation is the major process of transportation, followed by suspension.

Diagenesis is one of the most important factors that affects reservoir rock property. Despite the fact that published data gives a vast amount of information on the geology, sedimentology, and lithostratigraphy of the Ecca Group in the Karoo Basin of South Africa, little is known about the diagenesis of the potentially feasible or economically viable sandstones and mudrocks of the Ecca Group. This study aims to provide an account of the diagenesis of sandstones and mudstones from the Ecca Group. Twenty-five diagenetic textures and structures were identified and grouped into three stages that include early diagenesis, burial diagenesis and uplift-related diagenesis. Clay minerals are the most common cementing materials in the sandstones. Smectite, kaolinite, and illite are the major clay minerals that act as pore lining rims and pore-filling materials. A part of the clay minerals and detrital grains was strongly replaced by calcite. Calcite precipitates locally in the pore spaces and partially or completely replaced clay matrix, feldspar, and quartz grains at or around their margins. Precipitation of cements and formation of pyrite and authigenic minerals occurred during the early diagenetic stage. This process was followed by lithification and compaction which brought about an increase in tightness of grain packing, loss of pore spaces, and thinning of bedding thickness due to overloading of sediments and selective dissolution of the framework grains. Mineral overgrowths, mineral replacement, clay-mineral transformation, dissolution, deformation, and pressure solution occurred during burial diagenetic stage. After rocks were uplifted, weathered and unroofed by erosion, this resulted in decementation and oxidation of iron-rich minerals. The rocks of the Ecca Group were subjected to moderate-intense mechanical and chemical compaction during their progressive burial. Intergranular pores, secondary dissolution, and fractured pores are well developed in the sediments of the Ecca Group. The presence of fractured and dissolution pores tend to enhance reservoir quality. However, the isolated nature of the pore linkage makes them unfavorable producers of hydrocarbons, which at best would require stimulation. The understanding of the space and time distribution of diagenetic processes in these rocks will allow the development of predictive models of their reservoir quality, which may contribute to the reduction of risks involved in hydrocarbon (oil and gas) exploration.

An integrated geological assessment of groundwater contamination was carried out to determine the nature of the subsurface as well as establish linkages between groundwater and contaminants in the vicinity of the Roundhill landfill, South Africa. Quantitative analysis involved measurement of physico-chemical properties of groundwater samples from two boreholes and a leachate pond within the landfill. Qualitative assessment involved combined measurements of electrical resistivity and time domain induced polarization (IP) across three profiles, using the double-dipole array. The physico-chemical analysis results show the presence of heavy metals (i.e.mercury, lead and arsenic) in groundwater samples in concentrations above the general acceptable limits. Perhaps, the high concentration of these metals could be due to the dumping of toxic and hazardous waste substances on the landfill, contrary to the landfill design and classification. Resistivity and IP pseudo-sections revealed a 4-layered earth structure and anomalous zones of resistivity (≤112 Ω-m) and low chargeability (≤1.25 ms) in the top layers. This is indicative of percolating leachate plume in the unsaturated zone. Despite the fact that layer lithologies and stratigraphy pose low risk to groundwater contamination, structural controls such as fractures in the bedrock are favourably disposed to the percolation of contaminants into the groundwater over time. Proper waste classification and inspection should be carried out on the landfill prior to waste disposal.

Diagenesis is one of the factors that affect reservoir quality in sandstones. Knowledge of diagenetic transformation and how it impacts the development of porosity in reservoirs rocks is thus key to successful mineral exploration. To date, little is known about the diagenesis of the uranium-hosted sandstones of the Stormberg Group, Karoo Basin, South Africa. Petrographic study, scanning electron microscopy (SEM) aided with energy dispersive X-ray (EDX), and X-ray diffraction (XRD) analyses were employed for the diagenetic study of the sandstones. This study aims to provide an account of the diagenesis of these rock units and how it impacts their reservoir quality. The diagenetic processes that have affected the sandstones are cementation, compaction, recrystallization, replacement, mineral overgrowth and dissolution. These processes have passed through early, late and uplift-related diagenesis. Formation of authigenic minerals and precipitation of the mineral cements occurred during different diagenetic phase but mostly during the early diagenetic stage. This stage was followed by lithification, which resulted in increased in grain packing, loss of pore spaces and thinning of bedding. Quartz and feldspar overgrowths, chloritization, muscovitization, concave-convex contacts, recrystallization, albitization and suture contacts are present in the late diagenetic stage. The uplift-related diagenetic stage was affected by calcitization, grain deformation and fracturing, dissolution and saussuritization. All these diagenetic processes largely affected the porosity and permeability of the sandstones. Primary and secondary porosities were both observed in the sandstones. In general, there is no single diagenetic process that is controlling the pattern of porosity evolution in the sandstones. On the other hand, the presence of fractured and dissolution pores tend to increase the porosity, thus enhancing the reservoir quality. This study shows that diagenesis has significantly altered the original petrologic characteristics of the sandstones which have induced considerable deterioration and heterogeneity in the reservoir quality of the Stormberg Group sandstones in the Main Karoo Basin of South Africa.

The sandstone units of the Early Cretaceous Lower Goru Formation are significant reservoir for gas, oil, and condensates in the Lower Indus Basin of Pakistan. Even though these sandstones are significant reservoir rocks for hydrocarbon exploration, the diagenetic controls on the reservoir properties of the sandstones are poorly documented. For effective exploration, production, and appraisal of a promising reservoir, the diagenesis and reservoir properties must be comprehensively analyzed first. For this study, core samples from depths of more than 3100 m from the KD-01 well within the central division of the basin have been studied. These sandstones were analyzed using petrographic, X-ray diffraction, and scanning electron microscopic analyses to unravel diagenetic impacts on reservoir properties of the sandstone. Medium to coarse-grained and well-sorted sandstone have been identified during petrographic study. The sandstone are categorized as arkose and lithic arkose. Principal diagenetic events which have resulted in changing the primary characters of the sandstones are compaction, cementation, dissolution, and mineral replacement. The observed diagenetic processes can be grouped into early, burial, and late diagenesis. Chlorite is the dominant diagenetic constituent that occurs as rims, coatings, and replacing grains. The early phase of coating of authigenic chlorite has preserved the primary porosity. The recrystallization of chlorite into chamosite has massively reduced the original pore space because of its bridging structure. The current study reveals that diagenetic processes have altered the original rock properties and reservoir characteristics of the Lower Goru sandstone. These preliminary outcomes of this study have great potential to improve the understanding of diagenetic process and their impact on reservoir properties of the Lower Goru sandstone in the Lower Indus Basin and adjoining areas.

A total of 92 representative sandstone samples of the Bredasdorp Basin in boreholes E-AH1, E-AJ1, E-BA1, E-BB1 and E-D3 have been investigated for their grain size characteristics. Grain size textural parameters and their cross plots, linear discriminate functions (LDFs), C–M (C = first percentile and M = median) diagram and log–probability plots were calculated and interpreted to understand the mode of transportation and hydrodynamic conditions and also to unravel the depositional environments of the sediments. The grain size textural parameters revealed that the Bredasdorp sandstones are unimodal, predominantly fine-grained, moderately well-sorted, mesokurtic and near symmetrical. The bivariate plots of grain size textural parameters indicate that the depositional environments had been influenced mainly by river/beach/coastal dune conditions. The LDF plots show that the sediments are turbidity current deposits in a shallow marine environment. The C–M diagram revealed that the studied sandstones were mainly deposited by traction currents and beach process. In addition, the grain size log–probability curves and C–M diagram show the predominance of suspension and saltation modes of sediment transportation. Based on the inter-relationship of the various statistical parameters, it is deduced that the Bredasdorp Basin are mainly shallow marine deposits with signature of beach and coastal river processes.