This paper reports the removal of paraquat from an aqueous solution using prepared carbonated jujube seed (JS/HSO-700). JS/HSO-700 was characterized by XPS, TGA, FTIR, N₂ physisorption, SEM, and Raman techniques. FTIR revealed the presence of active species on the JS/HSO-700 surface. The removal rate of paraquat was investigated as a function of multiple operational factors such as contact time, adsorbent dose and solution pH. Adsorption mechanism was fully investigated based on FTIR, Raman, and BET analyses before and after adsorption. Response surface methodology modeling using central composite design was performed to statistically optimize the adsorption conditions. The experimental paraquat removal efficiency was found to be 96.7 ± 2.02%, whereas the predicted value of the model was 94.31 ± 4.43%, showing that the predicted model values are in good agreement with the experimental value. Finally, cost analysis was performed to confirm the cost of the adsorbent based on energy consumption and reagent costs.

In this work, Sawdust was used to develop a new low-cost adsorbent and study its application to remove methylene blue dye from aqueous solution. Sawdust was calcined under air atmosphere at three different temperatures (300°C, 400°C, and 500°C) using phosphoric acid (H₃PO₄) as an activating agent. The structure, morphology, surface functions and the chemical composition of adsorbent were characterized by Fourier Transform Infrared spectra (FTIR), X-ray fluorescence (XRF), scanning electron microscopy (SEM), energy dispersive spectroscopy (EDS), specific surface area (BET) and Boehm method. Different operational parameters such as pH, adsorbent loading, contact time and were investigated to evaluate experimental data. The adsorption of MB on SD-300, SD-400, and SD-500 show that the pseudo-second-order and Langmuir models fitted better the experimental results of MB adsorption onto all adsorbents. The maximum capacities based on the Langmuir model were 416.7 mg.g⁻¹ for SD-300, 526.3 mg.g⁻¹ for SD-400, and 819.7 mg.g⁻¹ for SD-500. The positive values of ΔG, ΔH, and ΔS implied that the adsorption process was non-spontaneous and endothermic nature. Finally, Regeneration of the SD-500 was investigated and optimization was performed using CCD combined with RSM.

Chitosan, which is a derivative of chitin, is particularly popular due to its biodegradable and renewable nature. However, the properties of chitosan can be inconsistent due to the extraction process and its natural origin, which poses a challenge to its use in composite materials as a matrix. The properties of chitosan can be tuned by controlling the degree of deacetylation (the extent to which acetyl groups are removed from chitin to form chitosan) and molecular weight. This paper presents a detailed study on the extraction and characterization of chitosan from shrimp shells. The structural thermal and mechanical characterization were studied using several techniques: Fourier-transform infrared spectroscopy, X-ray diffraction, thermogravimetric analysis and differential scanning calorimetry. The intrinsic viscosity and deacetylation degree were determined using various methods. The results showed an average degree of deacetylation of 77%. The chitosan films exhibited a high tensile strength of 43.9 MPa and an elongation at break of 3.14%. The thermal analysis revealed that the films had a glass transition temperature of 88 °C and a maximum thermal degradation temperature of 320 °C. The findings of this research could contribute to the development of chitosan-based materials with improved properties, leading to its wider adoption in the future for composite matrix application. The simple and efficient method used for the extraction and purification of chitosan from shrimp shells makes it a cost-effective and eco-friendly alternative to synthetic polymers.

Shrimp shells were used to prepare chitosan as an adsorbent for reactive red 198 dye removal. The adsorption of reactive red 198 (RR-198) on chitosan has found to be dependent on some parameters such as pH, concentration, and temperature. These parameters were studied in the batch system to study the optimum adsorption conditions. The experimental result follows Langmuir isotherm model and the adsorption ability was found to be 357.1 mg/g. The pseudo-second-order equation was the best applicable model to describe the adsorption. Finally, the effect of different parameters affecting the adsorption was studied using central composite design matrix coupled with response surface methodology. Overall, this work shows that chitosan material based shrimp shells have countless potential to be used for dyes removal in wastewater treatment plants. Further fine-tuning of this material may open the field of their application.