Plant extracts are increasingly being examined in the corrosion inhibition of metal and alloys in various environments due to their potent antioxidant properties. The use of Artemisia annua L. aqueous extract (AAE) as an aluminium alloy 5083 (ALA) corrosion inhibitor in artificial seawater (ASW) was investigated using electrochemical tests and spectroscopy tools, while the active biocompounds found in AAE were analyzed using high-performance liquid chromatography (HPLC). Electrochemical results showed that AAE acts as an anodic inhibitor through the physisorption (ΔG ≈ –16.33 kJ mol⁻¹) of extract molecules on the ALA surface, thus reducing the active sites for the dissolution of the alloy in ASW. Fourier-transform infrared spectra confirmed that phenolic acids found in AAE formed the surface layer that protects ALA against the corrosive marine environment, while HPLC analysis confirmed that the main phytoconstituents of AAE were chlorogenic acid and caffeic acid. The inhibition action of phenolic acids and their derivatives found in the AAE was based on the physisorption of caffeic acid on the ALA surface, which improved physicochemical properties of the barrier film and/or conversion of Al³⁺ to elemental aluminium by phenolic acids as reducens, which slowed down the diffusion rate of Al³⁺ to or from the ALA surfaces. The protective effect of the surface layer formed in the presence of AAE against ASW was also confirmed by inductively coupled plasma–optical emission spectrometry (ICP-OES) whereby the measured concentration of Al ions after 1 h of immersion of ALA in the pure ASW was 15.30 μg L⁻¹ cm⁻², while after the addition of 1 g L⁻¹ AAE, the concentration was 3.09 μg L⁻¹ cm⁻².

The advantages of microwave technology over conventionally conducted experiments are numerous. Some of them are reduction in reaction time, a higher degree of process control, repeatability, and work safety. Microwave synthesis routes require a complete description of the experimental details, instrumentation, and design program of a microwave oven used in the experiments. In this work, microwave-assisted hydrothermal synthesis of hematite (α-Fe₂O₃) particles from 0.1 M FeCl₃ solution in highly alkaline media with heating in a microwave oven at continuous microwave emission of 800 W at 150 °C, 200 °C, and 250 °C for 20 min are presented. Also, the influence of the percentage of the addition of a cationic surfactant, cetyltrimethylammonium bromide (CTAB) on the composition, size, and shape of the final product was investigated. The samples precipitated at 150 °C formed a final product consisting of goethite (α-FeOOH) and hematite particles in contrast to the those precipitated at 200 °C and 250 °C where pure hematite phase was obtained. In these synthesis routes, the CTAB caused to slow down the rate of the goethite-to-hematite transformation process at temperatures at 200 °C but did not affect the transformation at 250 °C.

The solid-state ion-selective electrodes presented here are based on the FePO₄:Ag₂S:polytetrafluoroethylene (PTFE) = 1:1:2 with an addition of (0.25–1)% microwave-synthesized hematite (α-Fe₂O₃), magnetite (Fe₃O₄), boehmite [γ-AlO(OH)], and alumina (Al₂O₃) nanoparticles (NPs) in order to establish ideal membrane composition for iron(III) cations determination. Synthesized NPs are characterized with Fourier-Transform Infrared (FTIR) spectroscopy, Powder X-Ray Diffraction (PXRD), and Scanning Electron Microscopy (SEM) with Energy Dispersive Spectroscopy (EDS). The iron oxides NPs, more specifically, magnetite and hematite, showed a more positive effect on the sensing properties than boehmite and alumina NPs. The hematite NPs had the most significant effect on the linear range for the determination of ferric cations. The membrane containing 0.25% hematite NPs showed a slope of −19.75 mV per decade in the linear range from 1.2∙10⁻⁶ to 10⁻² mol L⁻¹, with a correlation factor of 0.9925. The recoveries for the determination of ferric cations in standard solutions were 99.4, 106.7, 93.6, and 101.1% for different concentrations.

Magnetite nanoparticles (NPs) possess properties that make them suitable for a wide range of applications. In recent years, interest in the synthesis of magnetite NPs and their surface functionalization has increased significantly, especially regarding their application in biomedicine such as for controlled and targeted drug delivery. There are several conventional methods for preparing magnetite NPs, all of which mostly utilize Fe(iii) and Fe(ii) salt precursors. In this study, we present a microwave hydrothermal synthesis for the precipitation of magnetite NPs at temperatures of 200 °C for 20 min and 260 °C for 5 min, with only iron(iii) as a precursor utilizing chamomile flower extract as a stabilizing, capping, and reducing agent. Products were characterized using FTIR, PXRD, SEM, and magnetometry. Our analysis revealed significant differences in the properties of magnetite NPs prepared with this approach, and the conventional two-precursor hydrothermal microwave method (sample MagH). FTIR and PXRD analyses confirmed coated magnetite particles. The temperature and magnetic-field dependence of magnetization indicate their superparamagnetic behavior. Importantly, the results of our study show the noticeable cytotoxicity of coated magnetite NPs—toxic to carcinoma cells but harmless to healthy cells—further emphasizing the potential of these NPs for biomedical applications.

Considering the vast cultural and traditional heritage of the use of aromatic herbs and wildflowers for the treatment of light medical conditions in the Balkans, a comparison of the antioxidant capacity of wildflowers extracts from Herzegovina was studied using both cyclic voltammetry and spectrophotometry. The cyclic voltammograms taken in the potential range between 0 V and 800 mV and scan rate of 100 mV s⁻¹ were used for the quantification of the electrochemical properties of polyphenols present in four aqueous plant extracts. Antioxidant capacity expressed as mmoL of gallic acid equivalents per gram of dried weight of the sample (mmoL GAE g⁻¹ dw) was deduced from the area below the major anodic peaks (Q400 pH 6.0, Q500 pH 4.7, Q600 pH 3.6). The results of electrochemical measurements suggest that the major contributors of antioxidant properties of examined plants are polyphenolic compounds that contain ortho-dihydroxy-phenol or gallate groups. Using Ferric reducing-antioxidant power (FRAP) and 2,2′-azino-bis spectrophotometric methods (3-ethylbenzthiazoline-6-sulphonic acid) radical cation-scavenging activity (ABTS) additionally determined antioxidant capacity. The FRAP results ranged from 2.9702–9.9418 mmoL Fe/g dw, while the results for ABTS assays expressed as Trolox equivalents (TE) ranged from 14.1842–42.6217 mmoL TE/g dw. The Folin–Ciocalteu procedure was applied to determine the total phenolics content (TP). The TP content expressed as Gallic acid equivalents (GAE) ranged from 6.0343–9.472 mmoL GAE/g dw. The measurements of total flavonoid (TF) and total condensed tannin (TT) contents were also performed to obtain a broader polyphenolic profile of tested plant materials. Origanum vulgare L. scored the highest on each test, with the exception of TT content, followed by the Mentha × piperita L., Artemisia annua L., and Artemisia absinthium L., respectively. The highest TT content, expressed as mg of (−)catechin equivalents per gram of dried weight of sample (mg CE/g dw), was achieved with A. absinthium extract (119.230 mg CE/g dw) followed by O. vulgare (90.384 mg CE/g dw), A. annua (86.538 mg CE/g dw) and M. piperita (69.231 mg CE/g dw), respectively. In addition, a very good correlation between electrochemical and spectroscopic methods was achieved.

A novel ion-selective electrode with membranes based on iron(III) phosphate and silver sulfide integrated into a completely new electrode body design has been developed for the determination of iron(III) cations. The best response characteristics with linear potential change were found in the iron(III) concentration range from 3.97 × 10⁻⁵ to 10⁻² mol L⁻¹. The detection limit was found to be 2.41 × 10⁻⁵ mol L⁻¹ with a slope of −20.53 ± 0.63 and regression coefficient of 0.9925, while the quantification limit was 3.97 × 10⁻⁵ M. The potential change per concentration decade ranged from −13.59 ± 0.54 to −20.53 ± 1.56 for Electrode Body 1 (EB1) and from −17.28 ± 1.04 to −24 ± 1.87 for Electrode Body 2 (EB2), which is presented for the first time in this work. The prepared electrode has a long lifetime and the ability to detect changes in the concentration of iron cations within 20 s. Membrane M1 showed high recoveries in the determination of iron cations in iron(III) standard solutions (98.2–101.2%) as well as in two different pharmaceuticals (98.6–106.5%). This proves that this type of sensor is applicable in the determination of ferric cations in unknown samples, and the fact that all sensor parts are completely manufactured in our laboratory proves the simplicity of the method.