Wai Tuck Chow

Dr. Wai Tuck Chow

orcid

Research Focus & Metrics

Academic Career Length

8Years (2019-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
15 September 2023 in Micromachines
Verified
Journal Article
Open access
PDF file
Pho Van NguyenPho Van Nguyen
Pho Van Nguyen
DBDhyan Bohra
Dhyan Bohra
VMV.T Mai
V.T Mai
BHBoon Siew Han
Boon Siew Han
WCWai Tuck Chow
Wai Tuck Chow
The autonomous manipulation of objects by robotic grippers has made significant strides in enhancing both human daily life and various industries. Within a brief span, a multitude of research endeavours and gripper designs have emerged, drawing inspiration primarily from biological mechanisms. It is within this context that our study takes centre stage, with the aim of conducting a meticulous review of bioinspired grippers. This exploration involved a nuanced classification framework encompassing a range of parameters, including operating principles, material compositions, actuation methods, design intricacies, fabrication techniques, and the multifaceted applications into which these grippers seamlessly integrate. Our comprehensive investigation unveiled gripper designs that brim with a depth of intricacy, rendering them indispensable across a spectrum of real-world scenarios. These bioinspired grippers with a predominant emphasis on animal-inspired solutions have become pivotal tools that not only mirror nature’s genius but also significantly enrich various domains through their versatility.

28 January 2021 in Micromachines
Verified
Journal Article
Open access
PDF file
KVKhanh Tran Vy Vo
Khanh Tran Vy Vo
TLTomasz Marek Lubecki
Tomasz Marek Lubecki
WCWai Tuck Chow
Wai Tuck Chow
AGAmit Gupta
Amit Gupta
Holden LiHolden Li
Holden Li
A new approach in the development of aircraft and aerospace industry is geared toward increasing use of electric systems. An electromechanical (EM) piezoelectric-based system is one of the potential technologies that can produce a compactable system with a fast response and a high power density. However, piezoelectric materials generate a small strain, of around 0.1–0.2% of the original actuator length, limiting their potential in large-scale applications. This paper reviews the potential amplification mechanisms for piezoelectric-based systems targeting aerospace applications. The concepts, structural designs, and operation conditions of each method are summarized and compared. This review aims to provide a good understanding of piezoelectric-based systems toward selecting suitable designs for potential aerospace applications and an outlook for novel designs in the near future.

8 May 2023 in IEEE Robotics and Automation Letters
Verified
Journal Article
Closed access
Pho Van NguyenPho Van Nguyen
Pho Van Nguyen
WCWai Tuck Chow
Wai Tuck Chow
Efficiently picking up multiple objects is an emergent challenge for soft robotics. Our work focused on a novel gripper in picking up multiple objects in one grasping trial. The objects contacted softly with multiple elastic wires pre-stretch on the finger skeletons. This integration created a novel hybrid claw that inherited both the stability of the finger skeleton and the soft interaction of the wire. This wiring-claw gripper was designed and set up for conducting experimental evaluations in grasping seven kinds of objects: craft sticks, glue bottles, tea packs, candy pieces, powder packs, pyramids, and spheres. The experimental outcomes presented that our gripper design achieved high success rates in gripping multiple objects per trial at three levels of the lifting velocity. Additionally, the wiring-claw gripper generated soft interaction and was highly adaptive with diverse objects. The outcomes of this study are expected to efficiently pick up various objects at each trial without requiring sensing systems and complicated controls.

27 August 2024 in Robotics
Verified
Journal Article
Open access
PDF file
Pho Van NguyenPho Van Nguyen
Pho Van Nguyen
WCWai Tuck Chow
Wai Tuck Chow
DBDhyan Sunil Bohra
Dhyan Sunil Bohra
BZBohan Zhang
Bohan Zhang
BHBoon Siew Han
Boon Siew Han
HWHong Yee Alvin Wong
Hong Yee Alvin Wong
Our study presents a novel design for a cable-driven robotic arm, emphasizing low cost, low inertia movement, and long-term cable durability. The robotic arm shares similar specifications with the UR5 robotic arm, featuring a total of six degrees of freedom (DOF) distributed in a 1:1:1:3 ratio at the arm base, shoulder, elbow, and wrist, respectively. The three DOF at the wrist joints are driven by a cable system, with heavy motors relocated from the end-effector to the shoulder base. This repositioning results in a lighter cable-actuated wrist (weighing 0.8 kg), which enhances safety during human interaction and reduces the torque requirements for the elbow and shoulder motors. Consequently, the overall cost and weight of the robotic arm are reduced, achieving a payload-to-body weight ratio of 5:8.4 kg. To ensure good positional repeatability, the shoulder and elbow joints, which influence longer moment arms, are designed with a direct-drive structure. To evaluate the design’s performance, tests were conducted on loading capability, cable durability, position repeatability, and manipulation. The tests demonstrated that the arm could manipulate a 5 kg payload with a positional repeatability error of less than 0.1 mm. Additionally, a novel cable tightener design was introduced, which served dual functions: conveniently tightening the cable and reducing the high-stress concentration near the cable locking end to minimize cable loosening. When subjected to an initial cable tension of 100 kg, this design retained approximately 80% of the load after 10 years at a room temperature of 24 °C.

21 July 2023 in Micromachines
Verified
Journal Article
Open access
PDF file
Pho Van NguyenPho Van Nguyen
Pho Van Nguyen
DBDhyan Bohra
Dhyan Bohra
BHBoon Siew Han
Boon Siew Han
WCWai Tuck Chow
Wai Tuck Chow
Nowadays, achieving the stable grasping of objects in robotics requires an increased emphasis on soft interactions. This research introduces a novel gripper design to achieve a more universal object grasping. The key feature of this gripper design was a hybrid mechanism that leveraged the soft structure provided by multiple granular pouches attached to the finger skeletons. To evaluate the performance of the gripper, a series of experiments were conducted using fifteen distinct types of objects, including cylinders, U-shaped brackets, M3 bolts, tape, pyramids, big pyramids, oranges, cakes, coffee sachets, spheres, drink sachets, shelves, pulley gears, aluminium profiles, and flat brackets. Our experimental results demonstrated that our gripper design achieved high success rates in gripping objects weighing less than 210 g. One notable advantage of the granular-tendon gripper was its ability to generate soft interactions during the grasping process while having a skeleton support to provide strength. This characteristic enabled the gripper to adapt effectively to various objects, regardless of their shape and material properties. Consequently, this work presented a promising solution for manipulating a wide range of objects with both stability and soft interaction capabilities, regardless of their individual characteristics.

6 December 2023 in Scientific Reports
Verified
Journal Article
Open access
PDF file
Pho Van NguyenPho Van Nguyen
Pho Van Nguyen
DSDhyan Bohra Sunil
Dhyan Bohra Sunil
WCWai Tuck Chow
Wai Tuck Chow
Efficiently manipulating objects in a group state poses an emerging challenge for soft robot hands. Overcoming this problem necessitates the development of hands with highly stable structures to bear heavy loads and highly compliant designs to universally adapt to various object geometries. This study introduces a novel platform for the development of robot hands aimed at manipulating multiple objects in each trial. In this setup, the objects come into soft contact with an elastic wire affixed to the finger skeletons. This combination results in a harmonious hybrid finger, inheriting both the soft, flexible properties of the wire and the robust stability provided by the finger skeleton. To facilitate this approach, a theoretical model was proposed to estimate the kinematics of manipulating multiple objects using wiring-based fingers. Based on this model, we designed a hybrid gripper comprising two wiring-based fingers for conducting experimental evaluations in manipulating four groups of samples: a pair of bevel gears, a pair of bevel gears plus a pneumatic connector, a pair of glue bottles, and a pair of silicon bottles. The experimental results demonstrated that our proposed gripper reached good performance with high success rates in durability tests conducted at various lifting velocities and high adaption with objects in soft-friendly ways. These findings hold promise for efficiently manipulating multiple complex objects in each trial without the need for complex control systems.