Our study presents a novel design for a cable-driven robotic arm, emphasizing low cost, low inertia movement, and long-term cable durability. The robotic arm shares similar specifications with the UR5 robotic arm, featuring a total of six degrees of freedom (DOF) distributed in a 1:1:1:3 ratio at the arm base, shoulder, elbow, and wrist, respectively. The three DOF at the wrist joints are driven by a cable system, with heavy motors relocated from the end-effector to the shoulder base. This repositioning results in a lighter cable-actuated wrist (weighing 0.8 kg), which enhances safety during human interaction and reduces the torque requirements for the elbow and shoulder motors. Consequently, the overall cost and weight of the robotic arm are reduced, achieving a payload-to-body weight ratio of 5:8.4 kg. To ensure good positional repeatability, the shoulder and elbow joints, which influence longer moment arms, are designed with a direct-drive structure. To evaluate the design’s performance, tests were conducted on loading capability, cable durability, position repeatability, and manipulation. The tests demonstrated that the arm could manipulate a 5 kg payload with a positional repeatability error of less than 0.1 mm. Additionally, a novel cable tightener design was introduced, which served dual functions: conveniently tightening the cable and reducing the high-stress concentration near the cable locking end to minimize cable loosening. When subjected to an initial cable tension of 100 kg, this design retained approximately 80% of the load after 10 years at a room temperature of 24 °C.
This paper addresses the challenge of providing kinesthetic feedback in bilateral teleoperation by designing a wearable, lightweight (20 g), and compact haptic device, the HJ-Haptic, utilizing a honeycomb jamming mechanism for object stiffness rendering. The HJ-Haptic device can vary its stiffness, from 1.15 N/mm to 2.64 N/mm, using a 30 kPa vacuum pressure. We demonstrate its implementation in a teleoperation framework, enabling operators to adjust grip force based on a reliable haptic feedback on object stiffness. A three-point flexural test on the honeycomb jamming mechanism and teleoperated object-grasping tasks were conducted to evaluate the device’s functionality. Our experiments demonstrated a small RMSE and strong correlations in teleoperated motion, stiffness rendering, and interaction force feedback. The HJ-Haptic effectively adjusts its stiffness in response to real-time gripper feedback, mimicking the sensation of direct object grasping with hands. The device’s use of vacuum pressure ensures operator safety by preventing dangerous outcomes in case of gas leakage or material failure. Incorporating the HJ-Haptic into the teleoperation framework provided the reliable perception of object stiffness and stable teleoperation. This study highlights the potential of the honeycomb jamming mechanism for enhancing haptic feedback in various applications, including teleoperation scenarios, as well as interactions with extended-reality environments.