The use of polymeric materials such as geosynthetics in infrastructure works has been increasing over the last decades, as they bring down costs and provide long-term benefits. However, the aging of polymers raises the question of its long-term durability and for this reason researchers have been studying a sort of techniques to search for the required renewal time. This paper examined a commercial polypropylene (PP) nonwoven geotextile before and after 500 h and 1000 h exposure to ultraviolet (UV) light by performing laboratory accelerated ultraviolet-aging tests. The state of the polymeric material after UV exposure was studied through a wide set of tests, including mechanical and physical tests and thermoanalytical tests and scanning electron microscopy analysis. The calorimetric evaluations (DSC) showed distinct behaviors in sample melting points, attributed to the UV radiation effect on the aged samples. Furthermore, after exposure, the samples presented low thermal stability in the thermomechanical analysis (TMA), with a continuing decrease in their thicknesses. The tensile tests showed an increase in material stiffness after exposition. This study demonstrates that UV aging has effects on the properties of the polypropylene polymer.
Nonwoven geotextiles are geosynthetic products that are highly susceptible to ultraviolet degradation because light can reach a large area of the material due to its fiber arrangement. Even with additives, which delay the degradation process, material decomposition still occurs, and therefore the product’s long-term durability can be affected. In this paper, the mechanical and thermal behavior of a commercial nonwoven polyester geotextile subjected to accelerated ultraviolet aging tests were evaluated. The deterioration was evaluated by comparing the physical properties (mass per unit area, thickness, and tensile strength) and thermal behavior (thermogravimetry—TG, thermomechanical analysis—TMA, and differential scanning calorimetry—DSC) before and after exposure times of 500 h and 1000 h. The results showed that the ultraviolet aging tests induced some damage in the polyester fibers, leading to the deterioration of their tensile strength. For 1000 h of exposure, in which the reduction was larger, scanning electron microscopy (SEM) found some superficial disruption of the fibers, indicative of damage. TG and DSC could not capture the effects of UV radiation on polymer degradation, unlike TMA. This latter technique was effective in showing the differences between specimens before and after UV exposure.
Where granular materials are not easily available, local cohesive soils are increasingly employed in geosynthetic reinforced soil walls as a cheap and sustainable option. Conventional design methods do not yet account for the beneficial effect of cohesion in reducing the amount of required reinforcement. Similarly, the contribution of the face to stability is rarely accounted for, despite plenty of experimental evidence in its favour. In this paper, a semi-analytical method based on limit analysis is developed for the design of reinforced soil walls in frictional–cohesive backfills accounting for the wall contribution. A parametric analysis was conducted to evaluate the effect of soil cohesion and friction angle, facing batter, block width, location of the reaction force acting on the face, facing–backfill interface friction, facing–foundation interface friction and reinforcement length. Dimensionless design charts providing the required amount of reinforcement for lengths recommended in design standards are provided for both uniform and linearly increasing reinforcement distributions. It emerges that accounting for the presence of cohesion and the facing element can lead to significant savings in the overall level of reinforcement, and that tension cracks can be particularly detrimental to wall stability for highly cohesive soils so they cannot be overlooked in the design.
El estudio de la seguridad y confiabilidad de una fundación con pilotes se basa en el análisis de los momentos probabilísticos, media y coeficiente de variación asociados a la superficie resistente, donde se impone la existencia de una población finita representada por elementos aislados de la fundación. Este trabajo presenta un análisis de la adaptación de la estadística para estimar los parámetros poblacionales, usando los conceptos de la estadística de orden. Los valores de resistencia y solicitación de las fundaciones analizadas se basaron en los datos experimentales publicados en la literatura técnica, donde la variable resistencia fue medida por medio de pruebas de carga. El número de ensayos de campo indica especialmente que, para la diversidad de las fundaciones analizadas, la estadística de orden puede ser una herramienta bastante útil para estimar la probabilidad de falla de fundaciones con pilotes, cuando el número de pruebas de carga es pequeño.
This article describes a new small-scale test apparatus (2.10 m long, 0.50 m wide, and 0.50 m high) to study the behavior of small-diameter buried pipes subjected to both axial and lateral soil loading. The developed equipment innovates by not requiring a pullout system or additional objects inside the soil to apply the soil load on the pipe. Instead, soil loading is achieved by a simple mechanism of tilting the test box using an inexpensive manually controlled uplift system. The proposed apparatus aims to investigate the influence of different surcharge loads, soil cover ratios, soil densities, and pipe diameters. Besides, a camera support bolted to the apparatus structure enables image acquisition during testing with negligible relative movement between the digital camera and the apparatus. The applicability of this new facility is demonstrated through two model tests carried out to study the influence of soil density in soil/pipe response for a pipe subjected to lateral soil loading and with a soil cover ratio of 3.55. Results are presented in terms of pipe strains and soil displacements, which were measured using the digital image correlation technique.
A aplicação de ferramentas de Gestão de Projetos em pesquisas acadêmicas ainda não é amplamente difundida, seja por resistência ou falta de aprofundamento em relação aos conceitos relacionados a essa área de conhecimento. Uma pesquisa acadêmica, como em um doutorado, caracteriza-se como um projeto único, com duração limitada e, frequentemente, possuindo significativa complexidade, podendo se beneficiar significativamente da gestão de projetos para atingir aos requisitos de qualidade, atendimento ao escopo e aos prazos requeridos. Assim, o objetivo deste trabalho é aplicar a gestão do cronograma e dos riscos na etapa experimental de uma pesquisa de doutorado na área de Engenharia Geotécnica. Foram utilizadas as boas práticas de gerenciamento de projetos presentes no guia PMBOK. A partir do planejamento, partiu-se para a fase de execução do projeto, com concomitante controle do cronograma e monitoramento dos riscos. O controle do cronograma foi feito por meio do acompanhamento das atividades concluídas, em andamento, atrasadas e futuras. Foi necessária a solicitação de mudança da linha de base no decorrer do projeto devido a atrasos consideráveis detectados. O registro dos riscos permitiu antecipar as respostas aos riscos quando ocorridos, agilizando a tomada de decisões. O uso das ferramentas teve impacto positivo no desenvolvimento da etapa experimental da pesquisa, norteando o planejamento de forma organizada das etapas necessárias para a conclusão do projeto, com lições aprendidas para pesquisas futuras em laboratório.