Jefferson Lins da Silva

Prof. Dr. Jefferson Lins da Silva

University of Sao Paulo
orcid

Research Focus & Metrics

Academic Career Length

11Years (2016-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
26 February 2021 in Materials
Verified
Journal Article
Open access
PDF file
CVClever Valentin
Clever Valentin
MKMarcelo Kobelink
Marcelo Kobelink
YFYara Barbosa Franco
Yara Barbosa Franco
Fernando LavoieFernando Lavoie
Fernando Lavoie
Jefferson Lins da SilvaJefferson Lins da Silva
Jefferson Lins da Silva
Marta LuzMarta Luz
Marta Luz
The use of polymeric materials such as geosynthetics in infrastructure works has been increasing over the last decades, as they bring down costs and provide long-term benefits. However, the aging of polymers raises the question of its long-term durability and for this reason researchers have been studying a sort of techniques to search for the required renewal time. This paper examined a commercial polypropylene (PP) nonwoven geotextile before and after 500 h and 1000 h exposure to ultraviolet (UV) light by performing laboratory accelerated ultraviolet-aging tests. The state of the polymeric material after UV exposure was studied through a wide set of tests, including mechanical and physical tests and thermoanalytical tests and scanning electron microscopy analysis. The calorimetric evaluations (DSC) showed distinct behaviors in sample melting points, attributed to the UV radiation effect on the aged samples. Furthermore, after exposure, the samples presented low thermal stability in the thermomechanical analysis (TMA), with a continuing decrease in their thicknesses. The tensile tests showed an increase in material stiffness after exposition. This study demonstrates that UV aging has effects on the properties of the polypropylene polymer.

11 June 2022 in Materials
Verified
Journal Article
Open access
PDF file
YFYara Barbosa Franco
Yara Barbosa Franco
CVClever Valentin
Clever Valentin
MKMarcelo Kobelink
Marcelo Kobelink
Jefferson Lins da SilvaJefferson Lins da Silva
Jefferson Lins da Silva
CRClóvis Augusto Ribeiro
Clóvis Augusto Ribeiro
Marta LuzMarta Luz
Marta Luz
Nonwoven geotextiles are geosynthetic products that are highly susceptible to ultraviolet degradation because light can reach a large area of the material due to its fiber arrangement. Even with additives, which delay the degradation process, material decomposition still occurs, and therefore the product’s long-term durability can be affected. In this paper, the mechanical and thermal behavior of a commercial nonwoven polyester geotextile subjected to accelerated ultraviolet aging tests were evaluated. The deterioration was evaluated by comparing the physical properties (mass per unit area, thickness, and tensile strength) and thermal behavior (thermogravimetry—TG, thermomechanical analysis—TMA, and differential scanning calorimetry—DSC) before and after exposure times of 500 h and 1000 h. The results showed that the ultraviolet aging tests induced some damage in the polyester fibers, leading to the deterioration of their tensile strength. For 1000 h of exposure, in which the reduction was larger, scanning electron microscopy (SEM) found some superficial disruption of the fibers, indicative of damage. TG and DSC could not capture the effects of UV radiation on polymer degradation, unlike TMA. This latter technique was effective in showing the differences between specimens before and after UV exposure.

20 October 2020 in Sustainability
Verified
Journal Article
Open access
PDF file
Fernando LavoieFernando Lavoie
Fernando Lavoie
CVClever Valentin
Clever Valentin
MKMarcelo Kobelink
Marcelo Kobelink
Jefferson Lins da SilvaJefferson Lins da Silva
Jefferson Lins da Silva
MLMaria Lurdes Lopes
Maria Lurdes Lopes
High-density polyethylene (HDPE) geomembranes have been used for different applications in engineering including sanitation, such as landfills and waste liquid ponds. For these applications, the material can be exposed to aging mechanisms as thermal and chemical degradation, even to UV radiation and biological contact, which can degrade the geomembrane and decrease the material’s durability. This paper aims to present an experimental evaluation of two exhumed HDPE geomembranes, the first was used for 2.75 years in a sewage treatment aeration pond (LTE sample) and another was used for 5.17 years in a municipal landfill leachate pond (LCH sample). Physical and thermal analyses were used such as thermogravimetry (TG), differential thermal analysis (DTA), differential scanning calorimetry (DSC) and dynamic mechanic analysis (DMA). The thermogravimetric analyses showed significant changes in the LCH sample’s thermal decomposition probably caused by the interaction reactions between the polymer and the leachate. For the DSC analyses, the behavior seen in the LTE sample was not observed in the LCH sample. In the DMA analyses, the behavior of the LTE sample storage module shows which LCH sample is less brittle. The LTE sample presented low stress cracking resistance and low tensile elongation at break, following the DMA results.

1 December 2019 in Geosynthetics International
Verified
Journal Article
Closed access
MFMateus Fleury
Mateus Fleury
ESEder Carlos Guedes dos Santos
Eder Carlos Guedes dos Santos
Jefferson Lins da SilvaJefferson Lins da Silva
Jefferson Lins da Silva
EPEnnio Marques Palmeira
Ennio Marques Palmeira
Using recycled construction and demolition waste (RCDW) in geosynthetic reinforced soil (GRS) structures presents attractive environmental and economic aspects. However, bearing in mind installation damage can be responsible for significant changes in geosynthetic tensile-strain behavior, the damage caused by the RCDW must be assessed and quantified. This study aims to investigate the occurrence of mechanical damage during the installation of geogrids with RCDW backfill material using an in-field test facility. In order to understand the mechanisms related to the damage, the influences of the dropping height and compaction method were investigated. Statistical analysis using the Student's t-distribution was carried out to validate the occurrence of damage and calculate reduction factors for geogrids’ tensile strengths. Results revealed that dropping processes reduced the geogrid ultimate tensile strengths, but the compaction methods caused the highest reductions. The reduction factor values encourage the design of GRS structures with RCDW, an interesting option to satisfy the technical and economic aspects required for these structures in agreement with the environmental concerns.

2 October 2020 in Sustainability
Verified
Journal Article
Open access
PDF file
Maria Aparicio ArdilaMaria Aparicio Ardila
Maria Aparicio Ardila
SSSamira Tessarolli de Souza
Samira Tessarolli de Souza
Jefferson Lins da SilvaJefferson Lins da Silva
Jefferson Lins da Silva
CVClever Valentin
Clever Valentin
ADAngela Di Bernardo Dantas
Angela Di Bernardo Dantas
Using geotextile tubes as dewatering technology may significantly contribute to sustainable treatment of sludge generated in different industries, such as the water industry. This is an economical alternative for dewatering sludge from a Water Treatment Plant (WTP), which prevents sludge from being directly deposited in water bodies and makes it possible to then transfer the sludge to landfills. This paper presents a laboratory study and a statistical analysis, carried out to evaluate the geotextile tube dewatering of sludge from a WTP, discussing the relation between the independent variables (initial Total Solids (TS) of the sludge and polymer dosing) and dependent variables (performance indices used in the literature) evaluated using semi-performance tests. Sludge from a WTP and three different types of geotextiles bags were used. Changes in the geotextiles’ characteristics after dewatering were also evaluated, quantitatively using permittivity tests and qualitatively by Scanning Electron Microscopy (SEM). The results indicated turbidity of effluent that met the Brazilian regulations for the discharge of effluents into Class 2 water bodies, as well as higher percent-solids than those obtained with mechanical dewatering technologies. This study underscores the importance of semi-performance tests to understand dewatering in geotextile tubes.

24 September 2020 in Sustainability
Verified
Journal Article
Open access
PDF file
VVVinicius Ferreira Vianna
Vinicius Ferreira Vianna
MFMateus Fleury
Mateus Fleury
GMGustavo Menezes
Gustavo Menezes
ACArnaldo T. Coelho
Arnaldo T. Coelho
CBCecilia Bueno
Cecilia Bueno
Marta LuzMarta Luz
Marta Luz
Controlling and preventing soil erosion on slope surfaces is a pressing concern worldwide, and at the same time, there is a growing need to incorporate sustainability into our engineering works. This study evaluates the efficiency of bioengineering techniques in the development of vegetation in soil slopes located near a hydroelectric power plant in Brazil. For this purpose, twelve different bioengineering techniques were evaluated, in isolation and in combination, in the slopes (10 m high) of two experimental units (approximately 70 m long each) located next to the Paraíba do Sul riverbanks, in Brazil. High-resolution images of the slopes’ frontal view were taken in 15-day interval visits in all units for the first 90 days after implantation, followed by monthly visits up to 27 months after the works were finished. The images were treated and analyzed in a computer algorithm that, based on three-color bands (red–green–blue scale), helps to assess the temporal evolution of the vegetative cover index for each technique adopted. The results showed that most of the solutions showed a deficiency in vegetation establishment and were sensitive to climatological conditions, which induced changes in the vegetation phytosanitary aspects. Techniques which provided a satisfactory vegetative cover index throughout the investigated period are pointed out.