A tactile sensor is an indispensable component for electronic skin, mimicking the sensing function of organism skin. Various sensing materials and microstructures have been adopted in the fabrication of tactile sensors. Herein, we propose a highly sensitive flexible tactile sensor composed of nanocomposites with pyramid and irregularly rough microstructures and implement a comparison of piezoresistive properties of nanocomposites with varying weight proportions of multi-wall nanotubes and carbon black particles. In addition to the simple and low-cost fabrication method, the tactile sensor can reach high sensitivity of 3.2 kPa⁻¹ in the range of <1 kPa and fast dynamic response of 217 ms (loading) and 81 ms (recovery) at 40 kPa pressure. Moreover, body movement monitoring applications have been carried out utilizing the flexible tactile sensor. A sound monitoring application further indicates the potential for applications in electronic skin, human–computer interaction, and physiological detection.

In this paper, a micro gas chromatography (μGC) system contained a μGC column and a micro thermal conductivity detector (μTCD) was proposed. In order to reduce the volume of the system, some micro heaters were integrated on the surface and backside of the GC column, which could provide a robust temperature programming capability and rapidly increase the temperature of the μGC column. In addition, a silicon-glass μTCD with four-thermistor thermal conductivity cells that can offer significant advantages over previously reported designs including low dead volume, good thermal isolation, and elimination of the thermal noise was proposed in this paper. Experimental results have indicated that the μGC system with a detection limit of several ppm concentration levels separated and detected the benzene, toluene, and styrene in less than 3 min, and the μGC system also exhibited a good linear response in the test range.

In this work, a mini monitoring system integrated with a microfabricated metal oxide array sensor and a micro packed gas chromatographic (GC) column was developed for monitoring environmental gases. The microfabricated packed GC column with a 1.6 m length was used to separate the environmental gas, and the metal oxide semiconductor (MOS) array sensor, fabricated with nano-sized SnO-SnO₂ sensitive materials, was able to effectively detect each component separated by GC column. The results demonstrate that the monitoring system can detect environmental gas with high precision.