Multi-GeV electron beams with energy up to 4.2 GeV, 6% rms energy spread, 6 pC charge, and 0.3 mrad rms divergence have been produced from a 9-cm-long capillary discharge waveguide with a plasma density of $\approx 7\times 10^{17}{\mathrm{cm}}^{-3}$, powered by laser pulses with peak power up to 0.3 PW. Preformed plasma waveguides allow the use of lower laser power compared to unguided plasma structures to achieve the same electron beam energy. A detailed comparison between experiment and simulation indicates the sensitivity in this regime of the guiding and acceleration in the plasma structure to input intensity, density, and near-field laser mode profile.

Compact, tunable, radially symmetric focusing of electrons is critical to laser-plasma accelerator (LPA) applications. Experiments are presented demonstrating the use of a discharge-capillary active plasma lens to focus 100-MeV-level LPA beams. The lens can provide tunable field gradients in excess of $3000\mathrm{T}/\mathrm{m}$, enabling cm-scale focal lengths for GeV-level beam energies and allowing LPA-based electron beams and light sources to maintain their compact footprint. For a range of lens strengths, excellent agreement with simulation was obtained.

A hydrogen-filled capillary discharge waveguide operating at kHz repetition rates is presented for parameters relevant to laser plasma acceleration (LPA). The discharge current pulse was optimized for erosion mitigation with laser guiding experiments and MHD simulation. Heat flow simulations and measurements showed modest temperature rise at the capillary wall due to the average heat load at kHz repetition rates with water-cooled capillaries, which is promising for applications of LPAs such as high average power radiation sources.

Laser pulses with peak power $0.3\hspace{0.17em}\text{PW}$ were used to generate electron beams with energy $>4\hspace{0.17em}\text{GeV}$ within a $9\hspace{0.17em}\text{cm}$ -long capillary discharge waveguide operated with a plasma density of $\approx 7\times {10}^{17}\hspace{0.17em}{\text{cm}}^{-3}$ . Simulations showed that the super-Gaussian near-field laser profile that is typical of high-power femtosecond laser systems reduces the efficacy of guiding in parabolic plasma channels compared with the Gaussian laser pulses that are typically simulated. In the experiments, this was mitigated by increasing the plasma density and hence the contribution of self-guiding. This allowed for the generation of multi-GeV electron beams, but these had angular fluctuation $\mathrm{\gtrsim }2\hspace{0.17em}\text{mrad}$ rms. Mitigation of capillary damage and more accurate alignment allowed for stable beams to be produced with energy $2.7\pm 0.1\hspace{0.17em}\text{GeV}$ . The pointing fluctuation was $0.6\hspace{0.17em}\text{mrad}$ rms, which was less than the beam divergence of $\mathrm{\lesssim }1\hspace{0.17em}\text{mrad}$ full-width-half-maximum.

Synopsis: Metachronal motion is used across a wide range of organisms for a diverse set of functions. However, despite its ubiquity, analysis of this behavior has been difficult to generalize across systems. Here we provide an overview of known commonalities and differences between systems that use metachrony to generate fluid flow. We also discuss strategies for standardizing terminology and defining future investigative directions that are analogous to other established subfields of biomechanics. Finally, we outline key challenges that are common to many metachronal systems, opportunities that have arisen due to the advent of new technology (both experimental and computational), and next steps for community development and collaboration across the nascent network of metachronal researchers.

A plasma channel created by the combination of a capillary discharge and inverse Bremsstrahlung laser heating enabled the generation of electron bunches with energy up to 7.8 GeV in a laser-driven plasma accelerator. The capillary discharge created an initial plasma channel and was used to tune the plasma temperature, which optimized laser heating. Although optimized colder initial plasma temperatures reduced the ionization degree, subsequent ionization from the heater pulse created a fully ionized plasma on-axis. The heater pulse duration was chosen to be longer than the hydrodynamic timescale of $\approx 1$ ns, such that later temporal slices were more efficiently guided by the channel created by the front of the pulse. Simulations are presented which show that this thermal self-guiding of the heater pulse enabled channel formation over 20 cm. The post-heated channel had lower on-axis density and increased focusing strength compared to relying on the discharge alone, which allowed for guiding of relativistically intense laser pulses with a peak power of 0.85 PW and wakefield acceleration over 15 diffraction lengths. Electrons were injected into the wake in multiple buckets and times, leading to several electron bunches with different peak energies. To create single electron bunches with low energy spread, experiments using localized ionization injection inside a capillary discharge waveguide were performed. A single injected bunch with energy 1.6 GeV, charge 38 pC, divergence 1 mrad, and relative energy spread below 2% full-width half-maximum was produced in a 3.3 cm-long capillary discharge waveguide. This development shows promise for mitigation of energy spread and future high efficiency staged acceleration experiments.