Nadezhda A. Bobrova

Nadezhda A. Bobrova

Auto-generated profile, based on publicly available information

Nadezhda A. Bobrova

Faculty of Nuclear Sciences and Physical Engineering, Czech Technical University in Prague, Prague, Czech Republic

Research Focus & Metrics

Academic Career Length

48Years (1979-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
25 February 2019 in Physical Review Letters
Verified
Journal Article
Open access
PDF file
AGA. J. Gonsalves
A. J. Gonsalves
KNK. Nakamura
K. Nakamura
JDJ. Daniels
J. Daniels
CBC. Benedetti
C. Benedetti
CPC. Pieronek
C. Pieronek
WLW. P. Leemans
W. P. Leemans
Guiding of relativistically intense laser pulses with peak power of 0.85 PW over 15 diffraction lengths was demonstrated by increasing the focusing strength of a capillary discharge waveguide using laser inverse bremsstrahlung heating. This allowed for the production of electron beams with quasimonoenergetic peaks up to 7.8 GeV, double the energy that was previously demonstrated. Charge was 5 pC at 7.8 GeV and up to 62 pC in 6 GeV peaks, and typical beam divergence was 0.2 mrad.

28 October 2015 in Physical Review Letters
Verified
Journal Article
Open access
PDF file
JTJ. van Tilborg
J. van Tilborg
SSS. Steinke
S. Steinke
CGC. G. R. Geddes
C. G. R. Geddes
NMN. H. Matlis
N. H. Matlis
BSB. H. Shaw
B. H. Shaw
WLW. P. Leemans
W. P. Leemans
Compact, tunable, radially symmetric focusing of electrons is critical to laser-plasma accelerator (LPA) applications. Experiments are presented demonstrating the use of a discharge-capillary active plasma lens to focus 100-MeV-level LPA beams. The lens can provide tunable field gradients in excess of 3000  T/m, enabling cm-scale focal lengths for GeV-level beam energies and allowing LPA-based electron beams and light sources to maintain their compact footprint. For a range of lens strengths, excellent agreement with simulation was obtained.

17 December 2001 in Physical Review E
Verified
Journal Article
Closed access
PDF file
NBN. A. Bobrova
N. A. Bobrova
AEA. A. Esaulov
A. A. Esaulov
JSJ.-I. Sakai
J.-I. Sakai
PSP. V. Sasorov
P. V. Sasorov
DSD. J. Spence
D. J. Spence
SBS. V. Bulanov
S. V. Bulanov
A one-dimensional dissipative magnetohydrodynamics code is used to investigate the discharge dynamics of a waveguide for high-intensity laser pulses: the gas-filled capillary discharge waveguide. Simulations are performed for the conditions of a recent experimental measurement of the electron density profile in hydrogen-filled capillaries [D. J. Spence et al., Phys. Rev. E 63, 015401 (R) (2001)], and are found to be in good agreement with those results. The evolution of the discharge in this device is found to be substantially different to that found in Z-pinch capillary discharges, owing to the fact that the plasma pressure is always much higher than the magnetic pressure. Three stages of the capillary discharge are identified. During the last of these the distribution of plasma inside the capillary is determined by the balance between ohmic heating, and cooling due to electron heat conduction. A simple analytical model of the discharge during the final stage is presented, and shown to be in good agreement with the magnetohydrodynamic simulations.

20 January 2016 in Journal of Applied Physics
Verified
Journal Article
Closed access
PDF file
AGA. J. Gonsalves
A. J. Gonsalves
FLF. Liu
F. Liu
NBN. A. Bobrova
N. A. Bobrova
PSPavel Sasorov
Pavel Sasorov
CPC. Pieronek
C. Pieronek
WLW. P. Leemans
W. P. Leemans
A hydrogen-filled capillary discharge waveguide operating at kHz repetition rates is presented for parameters relevant to laser plasma acceleration (LPA). The discharge current pulse was optimized for erosion mitigation with laser guiding experiments and MHD simulation. Heat flow simulations and measurements showed modest temperature rise at the capillary wall due to the average heat load at kHz repetition rates with water-cooled capillaries, which is promising for applications of LPAs such as high average power radiation sources.

24 March 2017 in Physical Review Accelerators and Beams
Verified
Journal Article
Open access
PDF file
JTJ. van Tilborg
J. van Tilborg
SBS. K. Barber
S. K. Barber
HTH.-E. Tsai
H.-E. Tsai
KSK. K. Swanson
K. K. Swanson
SSS. Steinke
S. Steinke
WLW. P. Leemans
W. P. Leemans
Active plasma lenses have attracted interest in novel accelerator applications due to their ability to provide large-field-gradient (short focal length), tunable, and radially symmetric focusing for charged particle beams. However, if the discharge current is not flowing uniformly as a function of radius, one can expect a radially varying field gradient as well as potential emittance degradation. We have investigated this experimentally for a 1-mm-diameter active plasma lens. The measured near-axis field gradient is approximately 35% larger than expected for a uniform current distribution, and at overfocusing currents ring-shaped electron beams are observed. These observations are explained by simulations.

1 February 2013 in Physics of Plasmas
Verified
Journal Article
Closed access
PDF file
NBN. A. Bobrova
N. A. Bobrova
PSPavel Sasorov
Pavel Sasorov
CBC. Benedetti
C. Benedetti
SBS. S. Bulanov
S. S. Bulanov
CGC. G. R. Geddes
C. G. R. Geddes
WLW. P. Leemans
W. P. Leemans
A method of creating plasma channels with controllable depth and transverse profile for the guiding of short, high power laser pulses for efficient electron acceleration is proposed. The plasma channel produced by the hydrogen-filled capillary discharge waveguide is modified by a ns-scale laser pulse, which heats the electrons near the capillary axis. This interaction creates a deeper plasma channel within the capillary discharge that evolves on a ns-time scale, allowing laser beams with smaller spot sizes than would otherwise be possible in the unmodified capillary discharge.