Nowadays, the greatest part of the effort to reduce pollution emissions is directed toward the hybridization of automotive drive trains. In particular, the design of hybrid vehicles requires a complete system analysis, including the optimization of the electric and electronic devices installed on the vehicle and the design of all the mechanical connections between the different power sources to reach the required performances. The aim of this paper is to describe the design and prototype realization of a plug-in hybrid electrical vehicle (PHEV). Specifically, an energetic model was developed in order to analyze and optimize the power flux between the different parts. This model was experimentally validated using a prototype PHEV. In addition, in order to improve the driving range in an all-electric model (all-electric range), a detailed analysis of the inverter control was performed, because this component is one of the key components of the power train. In order to reduce inverter losses and dimensions, several control methods can be adopted. In this paper, a direct self-control strategy for reducing the inverter losses is presented and validated.

The dynamic interaction between a pantograph and a catenary influences the quality of the current collection; in particular, when two pantographs are used to collect current, the second pantograph is subjected to the disturbances originated on the overhead line by the transit of the first pantograph, generally causing a deterioration of current collection quality. Under these conditions, the occurrence of continuous sparking, contact loss, and arcing cause an increase of wear for both contact wire and collector strips, but also cause variations of contact voltage and feed current that in turn produce interferences on the on-board electrical systems like drive motors and signalling system. In order to investigate the latter, a procedure for the correlation of the quality of current collection with the level of electrical interference is proposed in this article. The procedure is based on experimental and numerical models combining relationships obtained by means of laboratory tests with simulation tools. An application to a real case of double pantograph collection is presented.

Smart monitoring systems are currently gaining more attention and are being employed in several technological areas. These devices are particularly appreciated in the structural field, where the collected data are used with purposes of real time alarm generation and remaining fatigue life estimation. Furthermore, monitoring systems allow one to take advantage of predictive maintenance logics that are nowadays essential tools for mechanical and civil structures. In this context, a smart wireless node has been designed and developed. The sensor node main tasks are to carry out accelerometric measurements, to process data on-board, and to send wirelessly synthetic information. A deep analysis of the design stage is carried out, both in terms of hardware and software development. A key role is played by energy harvesting integrated in the device, which represents a peculiar feature and it is thanks to this solution and to the adoption of low power components that the node is essentially autonomous from an energy point of view. Some prototypes have been assembled and tested in a laboratory in order to check the design features. Finally, a field test on a real structure under extreme weather conditions has been performed in order to assess the accuracy and reliability of the sensors.

The objective of this work is to present the design and testing of a Wireless Sensor Network, powered by solar energy, to be installed on freight trains with the purpose of performing on-board monitoring operations. A complete Wireless Sensor Network requires a certain number of Wireless Sensor Nodes, installed in significant points of a vehicle, provided with sensors and capable of elaborating raw data, transmitting them via wireless network as synthesis information to an on-board control unit. The on-board control unit periodically communicates the data gathered from different sensors to a ground central control unit through the Internet. Each Wireless Sensor Node needs to be powered independently. To achieve this purpose a small solar panel was used to provide the Wireless Sensor Node with the necessary amount of energy. Integrated circuits were designed for power management, acquisition, elaboration and wireless transmission of data and analyzed in terms of performances and energy consumption. The communication protocol between the Wireless Sensor Node and the control unit was first laboratory-tested and finally the whole system was installed on a real wagon, and on-field tests were conducted for a period of almost one year.

Nowadays, railway freight transportation is becoming more and more crucial since it represents the best alternative to road transport in terms of sustainability, pollution, and impact on the environment and on public health. Upgrading the potentiality of this kind of transportation, it would be possible to avoid delays in goods deliveries due to road accidents, traffic jams, and other situation occurring on roads. A key factor in this framework is therefore represented by monitoring and maintenance of the train components. Implementing a real time monitoring of the main components and a predictive maintenance approach, it would be possible to avoid unexpected breakdowns and consequently unavailability of wagons for unscheduled repair activities. As highlighted in recent statistical analysis, one of the elements more critical in case of failure is represented by the brake system. In this view, a real time monitoring of pressure values in some specific points of the system would provide significant information on its health status. In addition, since the braking actions are related to the load present on the convoy, thanks to this kind of monitoring, it would be possible to appreciate the different behavior of the system in case of loaded and unloaded trains. This paper presented an innovative wireless monitoring system to perform brake system diagnostics. A low-power system architecture, in terms of energy harvesting and wireless communication, was developed due to the difficulty in applying a wired monitoring system to a freight convoy. The developed system allows acquiring brake pressure data in critical points in order to verify the correct behavior of the brake system. Experimental results collected during a five-month field test were provided to validate the approach.