Acoustic metamaterials (AMMs) offer innovative solutions for physics and engineering problems, allowing lighter, multiphysics, and sustainable systems. They are usually studied analytically or numerically and then tested on prototypes. For this reason, additive manufacturing (AM) techniques are a popular way of quickly realising AMMs' innovative geometrical designs. However, AM parameters are often standardised without considering the specific issues of each AMM geometrical shape, leading to a possible mismatch between the analytical (or numerical) and experimental results. In this study, a simple AMM—a coiled-up resonator—has been produced with different AM technologies [fused deposition modeling (FDM), stereolithography (SLA), and selective laser melting and materials (polylactic acid, polyethylene terephthalate glycol, resin, flexible resin, and stainless steel). The sound absorption performance of these samples has been measured in two research labs in Italy and compared with the analytical and numerical calculations. This permitted the identification of the best combinations of AM technologies, their setup, and materials matching the expected results. The SLA/resin combination performed better overall; however, cheaper and more easily manageable samples made with FDM and polyethylene terephthalate glycol can achieve the same acoustic performance through the optimal AM printing setup. It is expected that this methodology could also be replicated for other AMMs.

Crucial factors in window performance, such as natural ventilation and noise control, are generally conceived separately, forcing users to choose one over the other. To solve this dualism, this study aimed to develop an acoustic metamaterial (AMM) ergonomic window design to allow noise control without dependence on the natural ventilation duration and vice versa. First, the finite element method (FEM) was used to investigate the noise control performance of the acoustic metawindow (AMW) unit, followed by anechoic chamber testing, which also served as the validation of the FEM models. Furthermore, FEM analysis was used to optimise the acoustic performance and assess the ventilation potential. The numerical and experimental results exhibited an overall mean sound reduction of 15 dB within a bandwidth of 380 to 5000 Hz. A good agreement between the measured and numerical results was obtained, with a mean variation of 30%. Therefore, the AMW unit optimised acoustic performance, resulting in a higher noise reduction, especially from 50 to 500 Hz. Finally, most of the AMW unit configurations are suitable for natural ventilation, and a dynamic tuned ventilation capacity can be achieved for particular ranges by adjusting the window’s ventilation opening. The proposed designs have potential applications in building acoustics and engineering where natural ventilation and noise mitigation are required to meet regulations simultaneously.

In modern urban scenarios, all the aspects of the historical heritage, including public open spaces and ancient buildings, have to meet the high increase of density of infrastructures and constructions, with the consequent change of visual and sound environments. This in turn affects people’s quality of life. Because of the growing interest on this problem, this study investigates the relationship between soundscape and design solutions for urban furniture, considering technical and environmental feasibility of the designing process, from the materials characteristics, to the acoustic and psychoacoustic impact of the tool on the user. The process includes the acoustic suitability of three-dimensional printing materials, the suitability of acoustic design using software simulation, the experimental assessment of the performance of the three-dimensional printed prototype and the statistical evaluation of the chosen studying parameters and conditions. This article describes all the stages of the designing process, with a focus on the study of shapes and volumes of the prototype and on its impact on the user’s perception. FEM simulations and experimental tests performed in a semi-anechoic chamber allowed to validate the design process. These analyses proved that the designed prototype of urban furniture can not only positively influence the physical environment but also the psychoacoustic perception of it.

Acoustic metamaterials (AMMs) are designed with complex geometrical shapes to obtain unconventional sound-absorbing performances. As additive manufacturing is particularly suited to print complex structures in a more straightforward and controllable way, AMMs often exploit three-dimensional (3-D) printing techniques. However, when exposed to different temperature conditions, such structures can be affected by geometrical deformations, especially when they are polymer-based. This can cause a mismatch between the experimental data and the expected theoretical performance; therefore, it is important to take thermal effects into account. The present paper investigates the influence of thermal deformations on the sound absorption of three geometries: a coplanar spiral tube, a system with double coiled resonators, and a neck-embedded resonator. Measurements were performed on each 3-D printed specimen in the impedance tube after the samples had been placed in a climate chamber to modify the temperature settings (T = 10–50 °C). Numerical models, validated on the measurements, were employed to quantify the geometrical deformation of AMM structures through a multiphysics approach, highlighting the effects of thermal stress on the acoustic behavior. The main outcomes prove that the frequency shifts of sound absorption peaks depend on temperature configurations and follow exponential regressions, in accordance with previous literature on polymeric materials.