Wave-based techniques for room acoustics simulations are commonly applied to low frequency analysis and small-sized simplified environments. The constraints are generally the inherent computational cost and the challenging implementation of proper complex boundary conditions. Nevertheless, the application field of wave-based simulation methods has been extended in the latest research decades. With the aim of testing this potential, this work investigates the feasibility of a finite-difference time-domain (FDTD) code simulating large non-trivial geometries in wide frequency ranges. A representative sample of large coupled-volume opera houses allowed demonstration of the capability of the selected FDTD model to tackle such composite geometries up to 4 kHz. For such a demanding task, efficient calculation schemes and frequency-dependent boundary admittances are implemented in the simulation framework. The results of in situ acoustic measurements were used as benchmarks during the calibration process of three-dimensional virtual models. In parallel, acoustic simulations performed on the same halls through standard ray-tracing techniques enabled a systematic comparison between the two numerical approaches highlighting significant differences in terms of input data. The ability of the FDTD code to detect the typical acoustic scenarios occurring in coupled-volume halls is confirmed through multi-slope decay analysis and impulse responses' spectral content.

Sound absorbing micro-perforated panels (MPPs) are being increasingly used because of their high quality in terms of hygiene, sustainability and durability. The present work investigates the feasibility and the performance of MPPs when used as an acoustic treatment in lecture rooms. With this purpose, three different micro-perforated steel specimens were first designed following existing predictive models and then physically manufactured through 3D additive metal printing. The specimens’ acoustic behavior was analyzed with experimental measurements in single-layer and double-layer configurations. Then, the investigation was focused on the application of double-layer MPPs to the ceiling of an existing university lecture hall to enhance speech intelligibility. Numerical simulations were carried out using a full-spectrum wave-based method: a finite-difference time-domain (FDTD) code was chosen to better handle time-dependent signals as the verbal communication. The present work proposes a workflow to explore the suitability of a specific material to speech requirements. The measured specific impedance complex values allowed to derive the input data referred to MPPs in FDTD simulations. The outcomes of the process show the influence of the acoustic treatment in terms of reverberation time (${\mathrm{T}}_{30}$) and sound clarity (${\mathrm{C}}_{50}$). A systematic comparison with a standard geometrical acoustic (GA) technique is reported as well.

Acoustic metamaterials (AMMs) are designed with complex geometrical shapes to obtain unconventional sound-absorbing performances. As additive manufacturing is particularly suited to print complex structures in a more straightforward and controllable way, AMMs often exploit three-dimensional (3-D) printing techniques. However, when exposed to different temperature conditions, such structures can be affected by geometrical deformations, especially when they are polymer-based. This can cause a mismatch between the experimental data and the expected theoretical performance; therefore, it is important to take thermal effects into account. The present paper investigates the influence of thermal deformations on the sound absorption of three geometries: a coplanar spiral tube, a system with double coiled resonators, and a neck-embedded resonator. Measurements were performed on each 3-D printed specimen in the impedance tube after the samples had been placed in a climate chamber to modify the temperature settings (T = 10–50 °C). Numerical models, validated on the measurements, were employed to quantify the geometrical deformation of AMM structures through a multiphysics approach, highlighting the effects of thermal stress on the acoustic behavior. The main outcomes prove that the frequency shifts of sound absorption peaks depend on temperature configurations and follow exponential regressions, in accordance with previous literature on polymeric materials.

The virtual acoustics provide an important tool in the comprehension of the architectural evolution of a historical place, offering the possibility to consciously operate for its preservation. St. John’s Baptistery represents an outstanding example of medieval architecture, recognized as UNESCO World Heritage and popular for its huge reverberation. When compared to other similar central-symmetry buildings, the Baptistery proves to be an outlier, enough to raise the interest of scholars. A model of the building was calibrated considering in situ acoustic measurements, the material properties and the liturgical use. The numerical simulations of the current geometry and the early design hypotheses are used to understand the factors affecting the peculiar sound behaviour. The temporal analysis of a Gregorian chant – ad hoc recorded – seems to confirm the needing of large reverberation.