Energy piles are double purpose foundation elements used both for transferring loads to the soil and temperature regulation in buildings. The response of the pile-soil interface is influenced by daily and seasonal temperature variations. In order to assess the impact of thermal cycles on the mobilization of shear strength in energy piles, a series of saturated soil-concrete interface direct shear tests were performed in the laboratory for different temperature gradients with a new interface direct shear device adapted for thermomechanical loading. As natural soils are very complex due to a high variability of mineralogy and anisotropy, silica and carbonate sands were chosen in this study. Those sands are considered as the main types of sandy soils commonly met in geotechnics. The experimental campaign is divided in two parts: (i) Concrete-soil direct shear tests at 13°C (constant temperature) to be used as a reference (ii) Concrete-soil direct shear tests after 10 temperature cycles with a gradient ΔT=10°C, under submerged conditions. For these two types of soils, realistic temperature cycles applied between 8 and 18°C cause the overall low contraction of the samples. However the interface friction angles are not significantly modified before and after the temperature cycles. Even if the vertical strains of soils are cumulative along temperature cycles, soil’s strains and friction angle changes are relatively negligible for the temperatures and water content tested, which support the low impact of temperature cycles on the deformation of soil concrete foundation under submerged conditions. These experimental results bring new features which will be implemented in numerical models to study the long-term use of energy piles.

Foundations of offshore and nearshore wind energy production systems are subjected to multidirectional and cyclic loads, due to the combined action of wind and waves and in the particular case of mutualized anchor foundations for floating wind turbines, to the phase shift between the loads generated in the adjacent anchored turbines. This article presents a three-dimensional numerical model developed with FLAC3D to analyse the impact of the change in direction of the horizontal load during the cycles. The typical case of a 1.7 m diameter and 10 m-long pile founded in a dense homogeneous sand is considered. A specific procedure has been implemented to apply force-controlled cycles with a change in lateral load direction. The results are compared to mono-directional lateral cyclic loads with the same average and cyclic forces. The results of the parametric study highlight the effect of the average value and amplitude of the cyclic loading on the accumulation of pile head horizontal displacements during the cycles. When a multidirectional cyclic loading is applied, it also leads to an accumulation of the deviated horizontal displacements, and the resulting accumulated horizontal displacements are larger than for a mono-directional cyclic loading of the same amplitude.

Le sable de Fontainebleau NE34 est un matériau de référence, en France, pour les essais de laboratoire et pour les modèles réduits en géotechnique (à 1×g ou en macro-gravité en centrifugeuse). Ses principales caractéristiques issues de la littérature sont synthétisées et ré-analysées. Après une revue de ses propriétés physiques (granulométrie, composition minéralogique, densités minimale et maximale, poids volumique des grains, forme des grains…), sont présentées ses propriétés de résistance au cisaillement obtenues sur différents essais (triaxial en compression et en extension ; cisaillement simple, direct ou annulaire), incluant le chargement cyclique et le frottement d’interface. La compressibilité, le facteur de pression des terres au repos, la perméabilité, les propriétés différées et de vieillissement, les propriétés thermiques sont aussi synthétisées. La déformabilité est également abordée via le module de cisaillement (bender elements, colonne résonnante, essai de centrifugation en champ libre), les coefficients de Poisson et d’amortissement.

This work aimed to understand the mechanical behavior of siliceous and calcareous sand materials under uniaxial confined compression loading at high stress levels. For this purpose, a series of quasi-oedometric compression tests were conducted on sand materials, to examine the effects of grain size, nature, and moisture contents on the soil crushability and the compression behavior, using an upgraded thick pressure vessel device that can reach mean stress up to 500 MPa. All samples were prepared using an aspect ratio of 1:1 (diameter: height), placed inside a high strength steel vessel, and compressed at a uniform axial displacement rate of 5 µm/s. The vessel is instrumented with multiple strain gauges allowing for the characterization of the hydrostatic and deviatoric behavior of each test. The results of quasi-oedometric tests, conducted on these types of sand, up to a passive confinement of 500 MPa, show that particle breakage is enhanced by the presence of water. It was noticed that, for siliceous sand, smaller particles break more than larger particles, and that the calcareous grains manifest a rapid response to axial stress compared to siliceous sand. Testing various soil properties shows a great potential to better characterize the sensitivity to breakage of soils. Lastly, a post-mortem analysis of samples before and after testing, using the X-ray micro-tomography technique, was applied to study the mechanical damage of sand specimens.