The discrete element model proposed in this paper addresses the macroscopic behavior of concrete taking into account the presence of free water in pores, thanks to a new interaction law between spherical discrete elements (DE). When concrete structures are subjected to a severe loading, e.g., an impact, material exhibits high triaxial compressive stresses which are highly influenced by the saturation ratio. In this new constitutive model, cracking and compaction are modeled at the interaction level between DEs and free water effects are taken into account by introducing a dependency between the water saturation ratio and the inelastic deformation due to the pore closure. The present numerical model has been implemented in the Yet Another Dynamic Engine code in order to deal with extreme loading situations leading to stress states characterized by a high mean stress level.

Previous studies have shown the strong influence of free water saturation ratio on the triaxial behavior of concrete at high confinement. This influence of the free water is usually attributed to a pore pressure effect. This article presents an experimental method aiming at measuring the pore pressure of free water into concrete samples under very high mean stress. Two types of deformable pressure sensors were designed and tested. The first one works in hydrostatic compression while the second one acts as a flexible membrane. The two sensors give comparable results and show that pore pressure may reach several hundred MPa in saturated concrete sample under a maximum 400 MPa hydrostatic compression. Such levels of pressure may explain the loss of shear strength and increase in volumetric stiffness observed on the macroscopic behavior of concrete due to the presence of free water.

The objective of this study is to measure the interstitial pore pressure into saturated concrete under hundreds of megapascals of confinement. This study is carried out within a more general context aiming to understand the behavior of concrete structures under impact. It is well known that the water saturation in massive concrete structures evolves from quasi-dry state at the surface to reach a quasi-saturated state at the core. Since the response of these structures under impact is highly linked to the state of saturation into the material, it is suspected that the pore pressure plays a major effect. This paper presents a new testing technique developed to measure the concrete pore pressure at high confining pressure. This latter is generated by means of a high capacity GIGA press. The new concept consists in implementing a pressure sensor into a water collecting cap. This cap is designed specially to collect water from concrete subjected to mechanical confinement pressure. Experimental results show that concrete pore pressure can reach values of the order of the confining pressure.

This work aimed to understand the mechanical behavior of siliceous and calcareous sand materials under uniaxial confined compression loading at high stress levels. For this purpose, a series of quasi-oedometric compression tests were conducted on sand materials, to examine the effects of grain size, nature, and moisture contents on the soil crushability and the compression behavior, using an upgraded thick pressure vessel device that can reach mean stress up to 500 MPa. All samples were prepared using an aspect ratio of 1:1 (diameter: height), placed inside a high strength steel vessel, and compressed at a uniform axial displacement rate of 5 µm/s. The vessel is instrumented with multiple strain gauges allowing for the characterization of the hydrostatic and deviatoric behavior of each test. The results of quasi-oedometric tests, conducted on these types of sand, up to a passive confinement of 500 MPa, show that particle breakage is enhanced by the presence of water. It was noticed that, for siliceous sand, smaller particles break more than larger particles, and that the calcareous grains manifest a rapid response to axial stress compared to siliceous sand. Testing various soil properties shows a great potential to better characterize the sensitivity to breakage of soils. Lastly, a post-mortem analysis of samples before and after testing, using the X-ray micro-tomography technique, was applied to study the mechanical damage of sand specimens.

1. Understanding the mechanical behaviour of rocks under varying stress conditions is essential for the design and safety of deep engineering applications, including mining operations, underground ...