With attention increasing regarding the level of air pollution in different metropolitan and industrial areas worldwide, interest in expanding the monitoring networks by low-cost air quality sensors is also increasing. Although the role of these small and affordable sensors is rather supplementary, determination of the measurement uncertainty is one of the main questions of their applicability because there is no certificate for quality assurance of these non-reference technologies. This paper presents the results of almost one-year field testing measurements, when the data from different low-cost sensors (for SO2, NO2, O3, and CO: Cairclip, Envea, FR; for PM1, PM2.5, and PM10: PMS7003, Plantower, CHN, and OPC-N2, Alphasense, UK) were compared with co-located reference monitors used within the Czech national ambient air quality monitoring network. The results showed that in addition to the given reduced measurement accuracy of the sensors, the data quality depends on the early detection of defective units and changes caused by the effect of meteorological conditions (effect of air temperature and humidity on gas sensors and effect of air humidity with condensation conditions on particle counters), or by the interference of different pollutants (especially in gas sensors). Comparative measurement is necessary prior to each sensor’s field applications.
The actual method of assessing dispersion conditions has ceased to meet current knowledge about their influence on the level of pollutant concentrations, and there is a need to find a simple and more accurate tool for assessing and predicting dispersion conditions, especially with a focus on suspended PM10 particles. Based on the requirements of the forecasting departments of the Czech Hydrometeorological Institute, the methodology for defining dispersion conditions was revised and subsequently updated in 2024. The new methodology is based on the calculation of the ventilation index that has been part of the ALADIN model since 2013. It is based on the intervals of PM10 concentration deciles and the corresponding ventilation index thresholds assigned to them, defining individual classes of dispersion conditions. The threshold values of individual classes of dispersion conditions correspond to the median values in the relevant decile classes (rounded to hundreds). Verification of the methodology on data not used in the classification design shows that the proposed classification is logical, functional, and applicable for routine operation. Compared to the previous classification, four classes of dispersion conditions are now proposed, namely poor, moderately poor, good and very good dispersion conditions. Dispersion conditions are essential for assessing the level of air pollution, therefore it is necessary to pay sufficient attention to the retrospective assessment of dispersion conditions from a long-term perspective. For this assessment, a comprehensive PTRP parameter was proposed within the individual classes of dispersion conditions, including a verbal assessment of deviations from the normal 1991–2023, using ventilation index data from the reanalysis of the ALADIN model.
1 December 2022 in Chemistry-Didactics-Ecology-Metrology
Regular mathematical modelling of the dispersion of emissions from large sources is required by law in all EU countries. It is also used in risk analysis to predict releases of toxic substances from various technologies, from volcanic activity and possibly also terrorist acts. However, there is a shortage of experts in this very specific and demanding profession in the labour market in most EU countries. In a collaboration between academicians from neighbouring University of Hradec Králové and University of Opole and experts from important ecological companies of both regions we designed and verified as a part of a four-year pedagogical project supported by the EU a comprehensive education system in mathematical modelling of emission dispersion with exchange field trips and internships of students during cross-border Polish-Czech university education. The paper consists of two separate parts. The first part is focused on implementation of innovative lesson “Principles, algorithms, and differences of environmental dispersion emissions models”, used on both sides of Polish-Czech border region. An example of the use of the educational package of the Gaussian plume model with PC Templates, who was modified in cooperation between teachers from both cross-border universities and experts from professional companies is presented here too. Our four-year experience with student motivational field trips to professional companies in both border regions and exchange one-month professional internships for interested students to two Czech professional companies, where students learn to work with to the Gaussian plume model and one Polish professional company, where students are introduced to the Gaussian puff model is also discussed. The following separate second part will be focused on the innovative lesson of multivariate statistical methods of environmental data analysis, which are required for processing materials for modern mathematical modelling of the dispersion of emissions in practice. The target users of this two-part innovative courses are students of the MSc degree in Physical Measurement and Modelling at the University of Hradec Králové and students of the MSc degree in environmental studies at the University of Opole. However, it is also open to other Czech and foreign students and professionals.
Low-cost optical particle counters (OPCs) are increasingly used for supplementary air-quality monitoring, but their long-term performance remains insufficiently characterised. This study evaluated two pairs of Sensirion OPCs (SEN54 and SPS30) against a Palas Fidas 200S equivalent monitor (EM) over a 19-month field deployment. Sensor agreement was considerably lower for PM10 (mean R2 = 0.50, mean RMSE = 13.70 µg·m−3) than for PM2.5 (mean R2 = 0.87, mean RMSE = 5.53 µg·m−3). None of the sensors adequately captured elevated PM10 episodes associated with mineral dust, and removing these episodes moderately improved agreement with the EM. Both sensor types exhibited pronounced seasonal variability, with substantially better performance during the cold season. A large proportion of this variability was explained by atmospheric moisture conditions represented by the dew point deficit (DPD). MARS-based correction models combining sensor-reported PM concentrations and DPD improved performance to mean R2 values of 0.68 for PM10 (mean RMSE = 8.25 µg·m−3) and 0.92 for PM2.5 (mean RMSE = 3.29 µg·m−3). For SPS30 sensors, particle-count and DPD-based corrections further improved PM10 and PM2.5 performance, although high PM10 episodes remained challenging for some sensors. Residual warm-season underestimation suggests that aerosol-specific properties beyond atmospheric moisture continue to affect sensor accuracy.