Power switches and electrolytic capacitors are the most vulnerable components in the power electronic converters. Any failure in these components may result in severe damages, if no remedial action is employed. Prior to any remedy, the first step is fault diagnosis. In this paper, a new type of Rogowski coil sensor is proposed. The sensor captures the inductor current derivative, which contains suitable signatures for switch fault diagnosis and capacitor lifetime monitoring in nonisolated single-switch dc-dc converters. Using the captured signal, detection of switch open-circuit and short-circuit faults is realized by a simple logic circuit. Furthermore, a new capacitor lifetime monitoring technique is proposed, which employs this signal for calculating equivalent series resistance of the capacitor. The proposed sensor has some remarkable advantages. Due to its nonmagnetic core, the problem related to nonlinear response of magnetic cores at high frequencies will not be encountered. Furthermore, the proposed cost-efficient approach can be easily implemented even for already fabricated converters. The performance of the proposed sensor is evaluated using some finite-element simulations and experiments for a buck converter. The results confirm the capabilities of the sensor for switch fault diagnosis and capacitor lifetime monitoring in nonisolated single-switch dc-dc converters.
28 July 2017 in IEEE Transactions on Industrial Electronics
Reliable operation of dc-dc converters is vital for many applications. An appropriate converter monitoring scheme is required for fault detection and adoption of effective remedial strategies. Switch faults and degradation of electrolytic capacitor account for a considerable portion of the converter failures. Although rate of diode failures is not remarkable, power switch may be damaged in case of diode fault occurrence. Furthermore, for applications in which a redundant switch is employed as a remedy, it will be also endangered by diode failures if diode fault detection has not been considered in the monitoring scheme. Therefore, diode condition monitoring improves reliability of the converter monitoring approaches. This paper presents a simple diagnosis technique for open-circuit and short-circuit faults of the switch and diode in nonisolated dc-dc converters. The technique only employs diode voltage as the detection signature. The diode voltage and gate driver signal are processed in a simple logic circuit to generate some indicators for switch and diode fault diagnosis. Basis of the technique is discussed in detail. Several experiments have been carried out on buck, boost, and buck-boost converters. The results confirm the technique capability for switch and diode fault diagnosis in less than one switching cycle.
This paper presents a new bio-inspired metaheuristic algorithm called Red Panda Optimization (RPO) that imitates the natural behaviors of red pandas in nature. The main design idea of RPO is derived from two characteristic natural behaviors of red pandas: (i) foraging strategy, and (ii) climbing trees to rest. The proposed RPO approach is mathematically modeled in two phases of exploration based on the simulation of red pandas’ foraging strategy and exploitation based on the simulation of red pandas’ movement in climbing trees. The main advantage of the proposed approach is that there is no control parameter in its mathematical modeling, and for this reason, it does not need a parameter adjustment process. The performance of RPO is evaluated on fifty-two standard benchmark functions including unimodal, high-dimensional multimodal, and fixed-dimensional multimodal types as well as CEC 2017 test suite. The optimization results obtained by the proposed RPO approach are compared with the performance of twelve well-known metaheuristic algorithms. The simulation results show that RPO, by maintaining the balance between exploration and exploitation, is effective in solving optimization problems and its performance is superior over competitor algorithms. Based on the analysis of the optimization results, RPO has provided more successful performance compared to the competitor algorithms in 100% of unimodal functions, 100% of high-dimensional multimodal functions, 100% of fixed-dimensional multimodal functions, and 86.2% of CEC 2017 test suite benchmark functions. Also, the statistical analysis of the Wilcoxon rank sum test shows that the superiority of RPO in the competition with the compared algorithms is significant from a statistical point of view. In addition, the results of implementing RPO on four engineering design problems confirms the ability of the proposed approach to handle real-world optimization applications.
12 October 2018 in IEEE Transactions on Power Electronics
Online monitoring is an inevitable necessity for DC-DC converters in industrial applications to achieve a fault-tolerant structure, which ensures reliable operation and prevents catastrophic failures. In this paper, a comprehensive monitoring system is proposed for non-isolated DC-DC converters. The proposed approach is mainly focused on monitoring the most prone to failure components of these converters including switching devices and capacitor. Using the proposed monitoring system, switch/diode open circuit and short circuit faults are detected in less than one switching cycle. Furthermore, online monitoring of the capacitor equivalent series resistance and switch on-state voltage as effective precursors of aging is also carried out. Finally, an inter-turn fault detection technique is presented for the converter inductor. The mentioned monitoring tasks are accomplished using only two electrical sensors (for capturing voltages across the converter diode and inductor) and two temperature sensors. The presented monitoring approach is simple, cost-effective, easy to implement, and applicable for all non-isolated DC-DC converters including buck, boost, and buck-boost converters. Performance of the monitoring system is evaluated by considering different scenarios in the experiments carried out on a laboratory prototype. The results confirm the effectiveness of the proposed system for fault diagnosis and aging monitoring in non-isolated DC-DC converters.
31 October 2020 in International Journal of Intelligent Engineering and Systems
Switched reluctance motors (SRMs) are extensively utilised in electric vehicles (EVs) due to some outstanding capabilities such as rugged and fault tolerant structure. Since the excitation of the phases is performed independently in the SRM, the motor could continue operation even in case of fault occurrence in one of the phases by disabling the faulty phase. However, to improve the reliability of the SRM for EV applications, an efficient fault diagnosis approach should be employed. In this study, an on‐line method for detection of winding inter‐turn short‐circuit fault in the SRMs is presented. The proposed technique is based on a model, in which the extended Kalman filter is utilised. The method achieves a fast response, thus, the remedial strategies could be employed at the initial moments after fault occurrence. The proposed method is simple to implement and reliable in practice. The performance of the proposed approach is verified using some simulations and experiments. The results confirm high capability of the method in different conditions.