Simionescu (Bogatu) Nicoleta

Dr. Simionescu (Bogatu) Nicoleta

orcid

Research Focus & Metrics

Academic Career Length

6Years (2021-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
8 August 2025 in Agronomy
Verified
Journal Article
Open access
PDF file
VGViorica Ghisman
Viorica Ghisman
AMAlina Crina Muresan
Alina Crina Muresan
SNSimionescu (Bogatu) Nicoleta
Simionescu (Bogatu) Nicoleta
EHELENA EMANUELA HERBEI
ELENA EMANUELA HERBEI
BLBuruiana Daniela Laura
Buruiana Daniela Laura
This review explores the pressing issue of soil degradation and contamination, highlighting their adverse environmental effects and the necessity for sustainable solutions. Soil degradation disrupts ecosystems and accelerates climate change, while soil contamination poses serious health risks to humans and wildlife. Recent advances in mitigation strategies demonstrate promising solutions, focusing on both degradation and contamination. This paper presents innovative methods, including the utilization of a dolomite–sewage sludge mixture to combat soil degradation effectively, enhancing soil fertility and supporting ecosystem restoration. Additionally, it introduces a novel approach using a dolomite–stainless steel slag mixture for petroleum hydrocarbon absorption, showcasing its efficacy in remediating contaminated sites. The results indicate significant improvements in soil health and a reduction in environmental pollutants, underscoring the potential of these mixtures to revolutionize soil management practices. Implementing such strategies not only mitigates degradation and contamination but also contributes to the sustainability of agricultural and natural ecosystems. This article aims to provide a comprehensive overview of these advancements, offering insights for researchers, policymakers, and environmental practitioners striving to foster a healthier and more sustainable environment.

2 December 2021 in Materials
Verified
Journal Article
Open access
PDF file
Lidia BeneaLidia Benea
Lidia Benea
SNSimionescu (Bogatu) Nicoleta
Simionescu (Bogatu) Nicoleta
The corrosion of implant biomaterials is a well-known critical issue when they are in contact with biological fluids. Therefore, the reactivity of Ti6Al4V implant biomaterials is monitored during immersion in a Hanks’ physiological solution without and with added metabolic compounds, such as lactic acid, hydrogen peroxide, and a mixture of the two. Electrochemical characterization is done by measuring the open circuit potential and electrochemical impedance spectroscopy performed at different intervals of time. Electrochemical results were completed by morphological and compositional analyses as well as X-ray diffraction before and after immersion in these solutions. The results indicate a strong effect from the inflammatory product and the synergistic effect of the metabolic lactic acid and hydrogen peroxide inflammatory compound on the reactivity and corrosion resistance of an implant titanium alloy.

30 January 2025 in Polymers
Verified
Journal Article
Open access
PDF file
SNSimionescu (Bogatu) Nicoleta
Simionescu (Bogatu) Nicoleta
BLBuruiana Daniela Laura
Buruiana Daniela Laura
AMAlina Crina Muresan
Alina Crina Muresan
VGViorica Ghisman
Viorica Ghisman
ARAnca Ravoiu
Anca Ravoiu
SFStefan Florescu
Stefan Florescu
This research aims to evaluate the effectiveness of protective coatings in preventing the corrosion of steel in the marine environment. Electrochemical tests were performed on S355JR steel immersed in natural seawater (Black Sea, Port Constanta) over a period of 22 weeks, using electrochemical techniques such as the evolution of the open circuit potential (OCP) and linear polarization resistance to calculate Rp and the corrosion rate (Vcorr). The investigated steel surfaces included (a) S355JR steel blasted with Al2O3, (b) S355JR steel blasted and coated with epoxy primer enriched with zinc, (c) S355JR steel blasted and coated with epoxy primer and polyurethane paint, and (d) S355JR steel blasted and subsequently coated with epoxy primer and then polyurethane paint to which kreutzonit particles had been added. The proportion of kreutzonit particles added to the polyurethane paint was 2 wt% of the total mass of the paint. Subsequently, the samples were subjected to morphological analyses and cross-sectional analysis by scanning electron microscopy (SEM), topographical characterization (roughness and microhardness), and structural assessments (FTIR and XRD), as well as an analysis of hydrophobicity (contact angle). The results of this study revealed significant differences in corrosion behavior between the different surfaces and coatings tested. Electrochemical analysis revealed that the coating with epoxy primer and polyurethane paint to which kreutzonit particles had been added provided the best corrosion protection in the marine environment during immersion.

30 July 2025 in Diagnostics
Verified
Journal Article
Open access
PDF file
EHELENA EMANUELA HERBEI
ELENA EMANUELA HERBEI
BLBuruiana Daniela Laura
Buruiana Daniela Laura
AMAlina Crina Muresan
Alina Crina Muresan
VGViorica Ghisman
Viorica Ghisman
SNSimionescu (Bogatu) Nicoleta
Simionescu (Bogatu) Nicoleta
Lucian Barbu-TudoranLucian Barbu-Tudoran
Lucian Barbu-Tudoran
Background/Objectives: Magnetic nanoparticles, particularly iron oxide-based materials, such as magnetite (Fe3O4), have gained significant attention as contrast agents in medical imaging This study aimsto syntheze and characterize Fe3O4-based core–shell nanostructures, including Fe3O4@TiO2 and Fe3O4@SiO2, and to evaluate their potential as tunable contrast agents for diagnostic imaging. Methods: Fe3O4, Fe3O4@TiO2, and Fe3O4@SiO2 nanoparticles were synthesized via co-precipitation at varying temperatures from iron salt precursors. Fourier transform infrared spectroscopy (FTIR) was used to confirm the presence of Fe–O bonds, while X-ray diffraction (XRD) was employed to determine the crystalline phases and estimate average crystallite sizes. Morphological analysis and particle size distribution were assessed by scanning electron microscopy with energy-dispersive X-ray spectroscopy (SEM-EDX) and transmission electron microscopy (TEM). Magnetic properties were investigated using vibrating sample magnetometry (VSM). Results: FTIR spectra exhibited characteristic Fe–O vibrations at 543 cm−1 and 555 cm−1, indicating the formation of magnetite. XRD patterns confirmed a dominant cubic magnetite phase, with the presence of rutile TiO2 and stishovite SiO2 in the coated samples. The average crystallite sizes ranged from 24 to 95 nm. SEM and TEM analyses revealed particle sizes between 5 and 150 nm with well-defined core–shell morphologies. VSM measurements showed saturation magnetization (Ms) values ranging from 40 to 70 emu/g, depending on the synthesis temperature and shell composition. The highest Ms value was obtained for uncoated Fe3O4 synthesized at 94 °C. Conclusions: The synthesized Fe3O4-based core–shell nanomaterials exhibit desirable structural, morphological, and magnetic properties for use as contrast agents. Their tunable magnetic response and nanoscale dimensions make them promising candidates for advanced diagnostic imaging applications.

6 December 2024 in Materials
Verified
Journal Article
Open access
PDF file
BLBuruiana Daniela Laura
Buruiana Daniela Laura
AMAlina Crina Muresan
Alina Crina Muresan
SNSimionescu (Bogatu) Nicoleta
Simionescu (Bogatu) Nicoleta
VGViorica Ghisman
Viorica Ghisman
EHELENA EMANUELA HERBEI
ELENA EMANUELA HERBEI
BVBașliu Vasile
Bașliu Vasile
The pipeline transport industry is constantly developing due to the high efficiency, long life, varied diameters of the pipelines, but a significant problem is the corrosion that occurs because of the corrosive attack of the various environments in which the pipelines are used. This study deals with the ex situ characterizations (optical microscopy, scanning electron microscopy coupled with energy dispersive X-ray analyses, X-ray diffraction analysis, roughness, and Vickers hardness analyses) and the in situ characterizations (gravimetric and electrochemical methods). Samples of steel were tested at immersion time, after 336 h, 672 h, 1344 h, 2016 h, and 4032 h of exposure to a 3.5% NaCl solution and drinking water. The corrosion rate evaluated with the gravimetric method varied between 0.036518 and 0.008993 mm/year in the 3.5% NaCl solution and 0.02834 and 0.034162 mm/year in drinking water. The electrochemical method resulted in an estimated corrosion rate range of 0.097–0.681 mm/year for the 3.5% NaCl solution, and 0.028–0.0472 mm/year for drinking water. The passivation effect, lifetime, and operating limit of the S235JR steel in the tested corrosive environments were studied. The study can provide technical support to increase the service life of S235JR steel and to predict the suitable environment reduce corrosion costs.

2 February 2023 in Inventions
Verified
Journal Article
Open access
PDF file
SNSimionescu (Bogatu) Nicoleta
Simionescu (Bogatu) Nicoleta
AMAlina Crina Muresan
Alina Crina Muresan
LMLaurentiu Mardare
Laurentiu Mardare
VGViorica Ghisman
Viorica Ghisman
ARAnca Ravoiu
Anca Ravoiu
BLBuruiana Daniela Laura
Buruiana Daniela Laura
The aim of this paper is to evaluate the corrosion rate expressed in material loss per unit of time and the surface properties of carbon steel type S235JR blasted with different types of materials (quartz, alumina, and red garnet with a particle size between 60 and 80 mesh (0.25–0.60 mm)). The estimation of corrosion rate was determined by electrochemical methods, such as open circuit potential (OCP), polarization resistance (Rp), corrosion rate (Vcorr), and gravimetric method by immersing the samples in 3.5% NaCl solution for a period of 336 h. All surfaces were characterized before and after corrosion tests using ex-situ characterizations, such as optical microscopy and roughness analysis. The results indicate that S235JR non-sandblasted exhibited higher polarization resistance, the lowest corrosion rate, and the lowest roughness values. While for the S235JR sandblasted groups, reduced corrosion resistance and increasing roughness values were noted. From the sandblasted groups, the lowest corrosion resistance and the highest value of roughness are attributed to the S235JR surface sandblasted with quartz. The S235JR surface sandblasted with quartz shows a decrease in corrosion resistance approximately two times lower than the non-sandblasted surface and an increasing of roughness approximately six times greater than the non-sandblasted surface.