ELENA EMANUELA HERBEI

Dr. ELENA EMANUELA HERBEI


Research Focus & Metrics

Academic Career Length

13Years (2014-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
8 August 2025 in Agronomy
Verified
Journal Article
Open access
PDF file
VGViorica Ghisman
Viorica Ghisman
AMAlina Crina Muresan
Alina Crina Muresan
SNSimionescu (Bogatu) Nicoleta
Simionescu (Bogatu) Nicoleta
EHELENA EMANUELA HERBEI
ELENA EMANUELA HERBEI
BLBuruiana Daniela Laura
Buruiana Daniela Laura
This review explores the pressing issue of soil degradation and contamination, highlighting their adverse environmental effects and the necessity for sustainable solutions. Soil degradation disrupts ecosystems and accelerates climate change, while soil contamination poses serious health risks to humans and wildlife. Recent advances in mitigation strategies demonstrate promising solutions, focusing on both degradation and contamination. This paper presents innovative methods, including the utilization of a dolomite–sewage sludge mixture to combat soil degradation effectively, enhancing soil fertility and supporting ecosystem restoration. Additionally, it introduces a novel approach using a dolomite–stainless steel slag mixture for petroleum hydrocarbon absorption, showcasing its efficacy in remediating contaminated sites. The results indicate significant improvements in soil health and a reduction in environmental pollutants, underscoring the potential of these mixtures to revolutionize soil management practices. Implementing such strategies not only mitigates degradation and contamination but also contributes to the sustainability of agricultural and natural ecosystems. This article aims to provide a comprehensive overview of these advancements, offering insights for researchers, policymakers, and environmental practitioners striving to foster a healthier and more sustainable environment.

30 January 2025 in Polymers
Verified
Journal Article
Open access
PDF file
SNSimionescu (Bogatu) Nicoleta
Simionescu (Bogatu) Nicoleta
BLBuruiana Daniela Laura
Buruiana Daniela Laura
AMAlina Crina Muresan
Alina Crina Muresan
VGViorica Ghisman
Viorica Ghisman
ARAnca Ravoiu
Anca Ravoiu
SFStefan Florescu
Stefan Florescu
This research aims to evaluate the effectiveness of protective coatings in preventing the corrosion of steel in the marine environment. Electrochemical tests were performed on S355JR steel immersed in natural seawater (Black Sea, Port Constanta) over a period of 22 weeks, using electrochemical techniques such as the evolution of the open circuit potential (OCP) and linear polarization resistance to calculate Rp and the corrosion rate (Vcorr). The investigated steel surfaces included (a) S355JR steel blasted with Al2O3, (b) S355JR steel blasted and coated with epoxy primer enriched with zinc, (c) S355JR steel blasted and coated with epoxy primer and polyurethane paint, and (d) S355JR steel blasted and subsequently coated with epoxy primer and then polyurethane paint to which kreutzonit particles had been added. The proportion of kreutzonit particles added to the polyurethane paint was 2 wt% of the total mass of the paint. Subsequently, the samples were subjected to morphological analyses and cross-sectional analysis by scanning electron microscopy (SEM), topographical characterization (roughness and microhardness), and structural assessments (FTIR and XRD), as well as an analysis of hydrophobicity (contact angle). The results of this study revealed significant differences in corrosion behavior between the different surfaces and coatings tested. Electrochemical analysis revealed that the coating with epoxy primer and polyurethane paint to which kreutzonit particles had been added provided the best corrosion protection in the marine environment during immersion.

22 August 2022 in Infection and Drug Resistance
Verified
Journal Article
Open access
PDF file
CVClaudiu-Ionut Vasile
Claudiu-Ionut Vasile
MVMihaela Camelia Vasile
Mihaela Camelia Vasile
MZMonica Laura Zlati
Monica Laura Zlati
EHELENA EMANUELA HERBEI
ELENA EMANUELA HERBEI
LLLorena Lepădatu
Lorena Lepădatu
Alin Laurentiu TATUAlin Laurentiu TATU
Alin Laurentiu TATU
Corona virus (COVID-19) is an epidemy of respiratory disease caused by a novel corona virus and it was declared by the World Health Organization (WHO) to be a global health pandemic emergency. Due to the neuropsychiatric manifestation of Covid-19 that have been associated with psychotic disorders, in this paper we choose to present a case from “Elena Doamna” Psychiatric Hospital from Galati, Romania and to correlate it with other cases from literature in a mini review presentation. In our paper, we present the case of a patient of 44-year-old men, with no past psychiatric history whose behavior included psycho-motor agitation, perception and thinking disorders, disorganized behaviour, attempted suicide by stabbing. The last perspectives from the two years of pandemic together with psychiatric disease linked the virus infections with psychosis to the main concern that Covid-19 could determine psychiatric disorders. There were also presented same literature studies of patients with no personal pathological history in the psychiatric field which developed psychiatric disorders after COVID-19 infection. SARS-CoV-2 has a psychological impact on the mental health status of the worldwide and, especially when it is associated with psychotic symptoms and can affect the quality-of-life. In some cases, the virus affected the brain and as a result, the psychosis symptoms could be an emerging phenomenon associated with the corona virus. Based on the DSM V and ICD-10 criteria, the diagnosis was of acute psychiatric disorders with symptoms of schizophrenia (F23.1). The case report and review reliefs that there is a causal link between the SARS CoV-2 infection and mental disorders, which is currently being investigated.

25 October 2021 in Sustainability
Verified
Journal Article
Open access
PDF file
BLBuruiana Daniela Laura
Buruiana Daniela Laura
COCristian Obreja
Cristian Obreja
EHELENA EMANUELA HERBEI
ELENA EMANUELA HERBEI
VGViorica Ghisman
Viorica Ghisman
The world’s rapidly growing demand for raw manganese has made it increasingly important to develop methods for the economic recovery of manganese from secondary sources. The current study aims to present possible ways for the recycling and reuse of silico-manganese slag landfilled in Tulcea, City on the Danube River close to the Danube Delta Biosphere Reserve in order to save the natural resources raw of manganese. In the last three decades, the ferroalloy production plant has over 2.6 million tons of slag. Slag dumping constitutes a significant source of air, water and soil pollution, which adversely affects the environment and human health. Mn present in the slag dump is an environmental pollutant with potentially toxic effects. The results obtained with a leaching method to recover manganese from slag shows two efficient ways to valorize manganese from solid fraction (54%) with size particles between 80 and 315 µm and/or reuse the leaching medium (56% Mn) with a slag size of <80 µm. The motivation of our research is the possibility to recover manganese from slag by saving natural resources of raw of manganese and the remaining fraction can be used as aggregate sources (construction and road rehabilitation by saving extract mineral aggregates and agriculture), in order to decommission the slag dump. The proposed research is in concordance with the sustainable use of natural resources for the achievement of sustainable development of the 2030 Agenda and Waste Management Legislation due of the huge ecological costs regarding non-conforming waste dumping. If we consider the cost-benefit analysis, the environmental future is more important the human health and the benefits on the quality of the population’s health and the environment which are not non-measurable in monetary value.

21 April 2023 in Materials
Verified
Journal Article
Open access
PDF file
EHELENA EMANUELA HERBEI
ELENA EMANUELA HERBEI
PAPetrică Alexandru
Petrică Alexandru
MBMariana Busila
Mariana Busila
In this paper, the authors describe the fabrication of nanocomposite chitosan-based systems of zinc oxide (ZnO), silver (Ag) and Ag-ZnO. Recently, the development of coated screen-printed electrodes using metal and metal oxide nanoparticles (NPs) for the specific detection and monitoring of different cancer tumors has been obtaining important results. Ag, ZnO NPs and Ag-ZnO prepared by the hydrolysis of zinc acetate blended with a chitosan (CS) matrix were used for the surface modification of screen-printed carbon electrodes (SPCEs) in order to analyze the electrochemical behavior of the typical redox system of a 10 mM potassium ferrocyanide—0.1 M buffer solution (BS). The solutions of CS, ZnO/CS, Ag/CS and Ag-ZnO/CS were prepared in order to modify the carbon electrode surface, and were measured at different scan rates from 0.02 V/s to 0.7 V/s by cyclic voltammetry. The cyclic voltammetry (CV) was performed on a house-built potentiostat (HBP). The cyclic voltammetry of the measured electrodes showed the influence of varying the scan rate. The variation of the scan rate has an influence on the intensity of the anodic and cathodic peak. Both values of currents (anodic and cathodic currents) have higher values for 0.1 V/s (Ia = 22 μA and Ic = −25 μA) compared to the values for 0.06 V/s (Ia = 10 μA and Ic = −14 μA). The CS, ZnO/CS, Ag/CS and Ag-ZnO/CS solutions were characterized using a field emission scanning electron microscopy (FE-SEM) with EDX elemental analysis. The modified coated surfaces of screen-printed electrodes were analyzed using optical microscopy (OM). The present coated carbon electrodes showed a different waveform compared to the voltage applied to the working electrode, depending on the scan rate and chemical composition of the modified electrodes.

30 July 2025 in Diagnostics
Verified
Journal Article
Open access
PDF file
EHELENA EMANUELA HERBEI
ELENA EMANUELA HERBEI
BLBuruiana Daniela Laura
Buruiana Daniela Laura
AMAlina Crina Muresan
Alina Crina Muresan
VGViorica Ghisman
Viorica Ghisman
SNSimionescu (Bogatu) Nicoleta
Simionescu (Bogatu) Nicoleta
Lucian Barbu-TudoranLucian Barbu-Tudoran
Lucian Barbu-Tudoran
Background/Objectives: Magnetic nanoparticles, particularly iron oxide-based materials, such as magnetite (Fe3O4), have gained significant attention as contrast agents in medical imaging This study aimsto syntheze and characterize Fe3O4-based core–shell nanostructures, including Fe3O4@TiO2 and Fe3O4@SiO2, and to evaluate their potential as tunable contrast agents for diagnostic imaging. Methods: Fe3O4, Fe3O4@TiO2, and Fe3O4@SiO2 nanoparticles were synthesized via co-precipitation at varying temperatures from iron salt precursors. Fourier transform infrared spectroscopy (FTIR) was used to confirm the presence of Fe–O bonds, while X-ray diffraction (XRD) was employed to determine the crystalline phases and estimate average crystallite sizes. Morphological analysis and particle size distribution were assessed by scanning electron microscopy with energy-dispersive X-ray spectroscopy (SEM-EDX) and transmission electron microscopy (TEM). Magnetic properties were investigated using vibrating sample magnetometry (VSM). Results: FTIR spectra exhibited characteristic Fe–O vibrations at 543 cm−1 and 555 cm−1, indicating the formation of magnetite. XRD patterns confirmed a dominant cubic magnetite phase, with the presence of rutile TiO2 and stishovite SiO2 in the coated samples. The average crystallite sizes ranged from 24 to 95 nm. SEM and TEM analyses revealed particle sizes between 5 and 150 nm with well-defined core–shell morphologies. VSM measurements showed saturation magnetization (Ms) values ranging from 40 to 70 emu/g, depending on the synthesis temperature and shell composition. The highest Ms value was obtained for uncoated Fe3O4 synthesized at 94 °C. Conclusions: The synthesized Fe3O4-based core–shell nanomaterials exhibit desirable structural, morphological, and magnetic properties for use as contrast agents. Their tunable magnetic response and nanoscale dimensions make them promising candidates for advanced diagnostic imaging applications.