Thermal energy storage (TES) is the most suitable solution found to improve the concentrating solar power (CSP) plant’s dispatchability. Molten salts used as sensible heat storage (SHS) are the most widespread TES medium. However, novel and promising TES materials can be implemented into CSP plants within different configurations, minimizing the TES costs and increasing the working temperature to improve the thermal performance of the associated power block. The first objective of this review is to provide an overview of the most widespread CSP technologies, TES technologies and TES-CSP configurations within the currently operational facilities. Once this information has been compiled, the second aim is to collect and present the existing European and North American TES-CSP Research and Development (R&D) projects within the last decade (2011–2021). Data related to these projects such as TES-CSP configuration path, TES and CSP technologies applied, storage capacity, power block associated and the levelized cost of electricity (LCOE) of the commercial up-scaling project are presented. In addition, project information such as location, research period, project leader and budget granted are also extracted. A timeline of the R&D projects launched from 2011 is built, showing the technology readiness level (TRL) achieved by the end of the project.
The global carbon emissions from the tertiary sector have increased during the last years, becoming a target sector for carbon capture technologies. This study analyzes the potential application of a carbon capture system (CCS) to the usage of biogas from a livestock waste treatment plant (LWTP) and solid biomass. The proposed BECCS system fulfils the requirement of energy demands of the LWTP and generates electricity. The CCS is sized to consume the biogas produced and the selected operation parameters ensure a high capture efficiency. The BECCS is completed by a Rankine cycle fed by solid biomass and waste heat from the capture process is sized and implemented to produce electricity and steam. The proposed concept handles 1534 kW of solid biomass and 1398 kW of biogas to produce 746.20 kWe and cover the heat demand of a LWTP, 597 kWth. The avoided CO2 emissions sum up to 1620 ton CO2/year. The economic calculations show the limitation of this concept deployment under current prices of electricity and CO2 allowances. Results show the potential feasibility under future scenarios with 5 to 6 payback periods whenever public policies support the use of CCS and EU ETS evolves towards higher prices of carbon allowances.
Concentrating solar power (CSP) technology with thermal energy storage (TES) could contribute to achieving a net zero emissions scenario by 2050. Calcium looping (CaL) is one of the potential TES processes for the future generation of CSP plants coupled with highly efficient power cycles. Research on CaL as a system for thermochemical energy storage (TCES) has focused on efficiency enhancement based on hybridization with other renewable technologies. This work proposes a novel solid management system to improve the efficiency of a CaL TCES system. The inclusion of a solid–solid separation unit after the carbonation step could lead to energy and size savings. The role of segregation between carbonated and calcined material on plant requirements is assessed, given the experimental evidence on the potential classification between more and less carbonated particles. The results show lower energy (up to 12%) and size (up to 76%) demands when the circulation of less carbonated material through the CaL TCES system diminishes. Moreover, under a classification effectiveness of 100%, the retrieval energy could increase by 32%, and the stored energy is enhanced by five times. The present work can be a proper tool to set the design and size of a CaL TCES system with a partial separation of the carbonated material.