Takuma Watanabe

Dr. Takuma Watanabe

orcid

Research Focus & Metrics

Academic Career Length

13Years (2014-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
28 March 2022 in IEEE Transactions on Antennas and Propagation
Verified
Journal Article
Closed access
TWTakuma Watanabe
Takuma Watanabe
HYHiroyoshi Yamada
Hiroyoshi Yamada
In this study, we propose a generalized algorithm for far-field radar cross-section determination by using 3-D synthetic aperture imaging with arbitrary antenna-scanning surfaces. This method belongs to a class of techniques called image-based near-field-to-far-field transformation. The previous image-based approaches have been formulated based on a specific antenna-scanning trajectory or surface, such as a line, plane, circle, cylinder, and sphere; majority of these approaches consider 2-D radar images to determine the azimuth radar cross-section. We generalize the conventional image-based technique to accommodate an arbitrary antenna-scanning surface and consider a 3-D radar image for radar cross-section prediction in both the azimuth and zenith directions. We validate the proposed algorithm by performing numerical simulations and anechoic chamber measurements.

20 February 2023 in IEEE Transactions on Instrumentation and Measurement
Verified
Journal Article
Closed access
TWTakuma Watanabe
Takuma Watanabe
This study proposes a novel image-based method for radar cross-section (RCS) prediction of a cluster of multiple static targets by synthesizing replicas of an original radar image. In this approach, we first measured the near-field backscattering of a target and reconstructed a corresponding radar image. Subsequently, modified copies of this image with rotation, translation, and spatial filtering were generated according to the predefined desired arrangement, and they were coherently summed to create a single synthesized image in which all scattering contributions contained in the modified images were virtually included. Finally, the synthesized image was utilized to predict the far-field RCS of multiple targets based on the theory of image-based near-field-to-far-field transformation (NFFFT). By employing the proposed algorithm, we can avoid building multiple test targets, resulting in reduced production costs. Moreover, we can easily test several different experimental layouts for multiple targets without repeating real measurements. Numerical simulations and experiments are conducted to demonstrate the validity of the proposed image-based RCS synthesis. The measurement results show that the proposed approach is valid when the multiple scattering between targets can be ignored, and the shadowing, which refers to the effect that a target is masked by another target, is insignificant.

3 February 2023 in IEEE Transactions on Instrumentation and Measurement
Verified
Journal Article
Closed access
TWTakuma Watanabe
Takuma Watanabe
YAYoshihiko Akamine
Yoshihiko Akamine
This study aims to provide practical information regarding the development of a cost-effective test model for low-cost radar cross-section (RCS) measurements. Two major possible approaches for reducing the manufacturing cost of a model are replacing the molding material with an inexpensive one and measuring a scaled-down model with a higher operating frequency. In this study, the former was achieved using a resin-made model coated with a conductive paste to imitate a complete metallic model. According to the scaling laws, the entire geometry, including the surface roughness of the model because of the conductive paint, must be appropriately scaled down. Because this roughness scaling is practically infeasible, we experimentally prove that, if an appropriate molding material is selected, shape-only scaling is valid without roughness scaling. As a preliminary study, two types of polyurethane resins with different densities were tested for their suitability for RCS measurements, and the resin with the higher density was shown to be appropriate for the RCS test model. Based on this preliminary study, 1/20- and 1/40-scale aircraft models were manufactured using aluminum or polyurethane resin, and their RCS values were measured to demonstrate that almost equivalent RCS patterns could be obtained. Therefore, low-cost RCS testing was achieved using the resin-made scaled model.

1 January 2014 in IEICE Transactions on Communications
Verified
Journal Article
Closed access
TWTakuma Watanabe
Takuma Watanabe
HYHiroyoshi Yamada
Hiroyoshi Yamada
MAMotofumi Arii
Motofumi Arii
RSRyoichi Sato
Ryoichi Sato
SPSang-Eun Park
Sang-Eun Park
YYYoshio Yamaguchi
Yoshio Yamaguchi

15 October 2020 in IEEE Transactions on Instrumentation and Measurement
Verified
Journal Article
Closed access
TWTakuma Watanabe
Takuma Watanabe
HYHiroyoshi Yamada
Hiroyoshi Yamada
In this study, we propose a synthetic aperture imaging technique for near-field scatterers mutually coupled with an antenna array, such as supporting structures, fixtures of the antenna, and a radome enclosing the antenna. Mutual coupling is a phenomenon, in which the scattered and reradiated waves from the array elements and the near-field scatterers are received by the array elements, and it is known to cause undesired effects in array signal processing, such as direction-of-arrival estimation. Therefore, we need to design the antenna array with the goal of reducing the unwanted scattered and reradiated waves as much as possible, and we require a method to evaluate the scattering intensity for validation of the antenna design. For this purpose, we utilize the bistatic synthetic aperture radar measurement, whereby we mount the receiving antenna array under test on a turntable for azimuth rotation and irradiate this antenna with a fixed transmitting antenna. The measured signals are synthesized to image an area that contains both the array elements and scatters of interest. Because the spatial separations between the array elements and the scatterers are small, the direct waves from the transmitting antenna to the receiving elements result in serious artifacts in the reconstructed image. To suppress this effect, we apply a direct wave filter as a preprocessing method for image reconstruction. We demonstrate the proposed imaging scheme via data sets of numerical electromagnetic simulations and anechoic chamber measurements.

22 October 2021 in IEEE Transactions on Instrumentation and Measurement
Verified
Journal Article
Closed access
TWTakuma Watanabe
Takuma Watanabe
HYHiroyoshi Yamada
Hiroyoshi Yamada
In this article, we propose a novel method of estimation of crack orientation on a metallic surface using linearly polarized circular synthetic aperture radar (SAR) imaging. We modeled a crack using a thin linear scatterer and considered the rotation of polarization basis vectors that were designed to match a predefined orientation vector corresponding to a temporary estimate of the orientation of the linear scatterer. The radar image intensity was expected to be a maximum when the specified orientation vector exactly matched the true scatterer orientation angle; therefore, to estimate the orientation of the scatterer, we aimed to obtain the maximum intensity of the image by varying the orientation vector. We validated the proposed scheme of estimation via a numerical electromagnetic simulation using the method of moments (MoM) and laboratory measurements carried out in an anechoic chamber. In this experiment, a metallic plate with slits was used as a simple surface crack model and the root mean square error and maximum error of the angular estimation were 1.9-degree and 5.1-degree, respectively.