We demonstrated a 1.1-µm band extended wideband wavelength-swept laser (WSL) that combined two semiconductor optical amplifiers (SOAs) based on a polygonal scanning wavelength filter. The center wavelengths of the two SOAs were 1020 nm and 1140 nm, respectively. Two SOAs were connected in parallel in the form of a Mach-Zehnder interferometer. At a scanning speed of 1.8 kHz, the 10-dB bandwidth of the spectral output and the average power were approximately 228 nm and 16.88 mW, respectively. Owing to the nonlinear effect of the SOA, a decrease was observed in the bandwidth according to the scanning speed. Moreover, the intensity of the WSL decreased because the oscillation time was smaller than the buildup time. In addition, a cholesteric liquid crystal (CLC) cell was fabricated as an application of WSL, and the dynamic change of the first-order reflection of the CLC cell in the 1-µm band was observed using the WSL. The pitch jumps of the reflection band occurred according to the electric field applied to the CLC cell, and instantaneous changes were observed.
Digital micromirror device (DMD)-based 4f-systems, a type of coherent optical information processing system, have become a powerful tool for optical convolutional neural networks taking advantage of their fast modulation speed and high-resolution capability. However, proper high bit-depth image information processing remains challenging due to the optical diffractions that arise from the binary nature of DMD operation. In this paper, we first characterize the diffraction phenomena that cause irradiance defects, namely the nonlinear grayscale and unintended dark lines. Then to resolve the issues, we propose a DMD operation method and a modified structure of the 4f-system based on blazed diffraction grating theory and numerical calculation of the Rayleigh-Sommerfeld propagation model. As a demonstration, we implement high bit-depth image information processing with an optimized optical 4f-system using DMDs and a collimated coherent light source.
We demonstrated spectral reflectometers for two types of reflectances, absolute and relative, of diffusely reflecting surfaces in directional-hemispherical geometry. Both are built based on the integrating sphere method with a Fourier-transform infrared spectrometer operating in a vacuum. The third Taylor method is dedicated to the reflectometer for absolute reflectance, by which absolute spectral diffuse reflectance scales of homemade reference plates are realized. With the reflectometer for relative reflectance, we achieved spectral diffuse reflectance scales of various samples including concrete, polystyrene, and salt plates by comparing against the reference standards. We conducted ray-tracing simulations to quantify systematic uncertainties and evaluated the overall standard uncertainty to be 2.18% (k = 1) and 2.99% (k = 1) for the absolute and relative reflectance measurements, respectively.
We present an integrating hemisphere-based (i.e., a variant of integrating spheres) implementation of the indirect illumination method for absolute photoluminescence quantum yield measurements, which is a recommended method in the international standard IEC 62607-3-1:2014. We rigorously formulated a mathematical model and a measurement procedure for the absolute photoluminescence quantum yield measurement in the integrating hemisphere-based system. The measurement system was calibrated using an Hg-Ar discharge lamp and spectral irradiance standard lamps for wavelength and relative spectral radiant flux scales, respectively. Furthermore, we identified and evaluated uncertainty components involved in the photoluminescence quantum yield (PLQY) measurement. To validate our measurement system, we applied it to the two de facto standard dyes: quinine bisulfate (QBS) and fluorescein (FLS). Consequently, their PLQY values were determined to be 0.563±0.024 (k=2) and 0.876±0.032 (k=2) for, respectively, QBS and FLS, which are consistent with previous reports.
Photoluminescence (PL) quantum efficiency (QE) is one of the important parameters to characterize photoluminescent materials especially for lighting and display applications. Under a few assumptions, IEC standard (IEC62607-3-1) provides two methods of high simplicity and moderate accuracy with an integrating sphere for absolute measurement of QE named ‘collimated incident light method (CILM)’ and ‘diffuse incident light method (DILM)’, respectively (International standard IEC 62607-3-1 2014 Nanomanufactureing-Key Control Characteristics Part3-1: Luminescent Nanomaterials-Quantum Efficiency 1st edn (Geneva: International Electrotechnical Commission); de Mello et al 1997 Adv. Mater . 9 230–2). However, the simplification unavoidably causes systematic errors, which could be significant in certain cases of sphere reflectance or material properties. In this paper, we numerically investigate the systematic errors that can occur in the standardised methods when employing a Monte Carlo ray-tracing simulation and also present the correction method based on additional measurement to estimate the diffusivity of the sample reflectance at excitation wavelength and absorption of the sample at PL emission wavelength.