This paper reports an evaluation of eleven oat genotypes in four environments for two consecutive years to identify high-biomass-yielding, stable, and broadly adapted genotypes in selected parts of Ethiopia. Genotypes were planted and evaluated with a randomized complete block design, which was repeated three times. The additive main effect and multiplicative interaction analysis of variances revealed that the environment, genotype, and genotype–environment interaction had a significant (p ≤ 0.001) influence on the biomass yield in the dry matter base (t ha⁻¹). The interaction of the first and second principal component analysis accounted for 73.43% and 14.97% of the genotype according to the environment interaction sum of squares, respectively. G6 and G5 were the most stable and widely adapted genotypes and were selected as superior genotypes. The genotype-by-environment interaction showed a 49.46% contribution to the total treatment of sum-of-squares variation, while genotype and environment effects explained 34.94% and 15.60%, respectively. The highest mean yield was obtained from G6 (12.52 kg/ha), and the lowest mean yield was obtained from G7 (8.65 kg/ha). According to the additive main effect and multiplicative interaction biplot, G6 and G5 were high-yielding genotypes, whereas G7 was a low-yielding genotype. Furthermore, according to the genotype and genotype–environment interaction biplot, G6 was the winning genotype in all environments. However, G7 was a low-yielding genotype in all environments. Finally, G6 was an ideal genotype with a higher mean yield and relatively good stability. However, G7 was a poor-yielding and unstable genotype. The genotype, environment, and genotype x environment interaction had extremely important effects on the biomass yield of oats. The findings of the graphic stability methods (additive main effect and multiplicative interaction and the genotype and genotype–environment interaction) for identifying high-yielding and stable oat genotypes were very similar.

This article aims to uncover the current knowledge on using bioconverted agricultural byproducts in the chicken diet and the impact of these byproducts on performance, product quality, and health status. Agricultural and agro-industrial activities generate thousands of tons of byproducts. Converting these agricultural byproducts into valuable entities would be an environmentally friendly, sustainable, and viable part of byproduct management. Upon recycling to make new products, the process contributes to socio-economic value and maintaining environmental health and paves the way for realizing energy security and a circular economy. The current paper identifies that solid-state fermentation has attracted more research attention than other fermentation counterparts because it requires minimal moisture, good oxygen availability, cheap media, low wastewater generation, low cost, a low processing scheme, low energy demand, and high productivity. This paper illustrates the role of proteolytic and lignin-degrading enzymes present in bacteria and fungi in the bioconversion process of complex polymers into smaller molecules of amino acids and simple sugar with a profound improvement in the palatability and bioavailability of agricultural products. In addition, the paper gives more detailed insights into using bioconverted agricultural products in chickens to improve performance, product quality, gut microbiota and morphology, and chicken welfare. In conclusion, the bioconversion of agricultural byproducts is an encouraging endeavor that should be supported by governments, research centers, universities, and non-governmental entities to improve the productivity of animal source foods by ensuring environmental sustainability and expanding food security efforts for national development.

The aim of the study is to evaluate the effect of Oat–field pea intercropping on the yield, nutritive value, and environmental impact of oat grown under a reduced level of nitrogen fertilisation. The trial was laid out in a randomized complete block design with the following treatments: oat-0 (oat (Avena sativa L., SRCP X 80 Ab 2291 variety) without N fertilization (urea)), oat-23 (oat fertilised with 23 kg N/ha), oat-46 (oat fertilised with 46 kg N/ha), O1P1 (oat intercropped with field pea (Pisum sativum L., local variety) a ratio of 1:1), O1P2 (oat intercropped with field pea a ratio of 1:2), and O2P1 (oat intercropped with field pea at a ratio of 2:1). All of the experimental plots received standard husbandry practices except for nitrogen fertilisation. Soil pH, organic matter, total nitrogen, available phosphorus, and organic carbon were determined before and after planting. The effect of nitrogen fertilization and intercropping of oat with field pea on carbon footprint, acidification footprint, eutrophication footprint, and human toxicity footprint was calculated for each plot. Oat-0 significantly reduced the total nitrogen content of the soil, while there was no significant effect of the other treatments. O2P1 significantly out-yielded all control groups; however, it was not significantly different from fertilisation treatments. Intercropping with field pea did not significantly increase the cost of production of dry matter, crude protein, or dry matter digestibility compared to control groups. Intercropping with field pea significantly reduced the carbon footprint, acidification, eutrophication, and human toxicity footprint compared to the control groups. Therefore, oat–field pea intercrops are recommended for the production of high-quality forage at low N input with reduced environmental impact.

Barley straw serves as livestock feed and mulch for soil and water conservation in the mixed barley-livestock systems of the Ethiopian highlands. High demand for barley straw biomass in the system creates competition between the two uses. This study aimed to identify the determinants of the utilization of barley straw for mulch and feed. Data on the production and use of barley straw were collected from 236 households using a structured questionnaire. Use of the straw for the purposes of soil mulch at three levels, 0–15% (marginal mulching), 15–35% (optimal mulching), 35–100% (over-mulching), was analyzed using a multinomial logit model. The optimal proportion of barley straw used as soil mulch was positively affected by the educational level of the household head, family size, distance between cropping land and homestead, number of equines in the household and amount of straw production. Female-headed households were more likely to mulch less than the optimal amount of barley straw. In general, the more the farmer’s exposure to formal extension, the less the proportion of barley straw used for soil mulching. This study provides guidance for the proportional utilization of barley straw. This will contribute to the design of appropriate biomass utilization strategies in barley-livestock farming systems.

The objective of the study was to establish the effect of appropriate supplementation days (days -21 to +7) using four isonitrogenous (14.7% CP) diets balanced to provide low (Lo-ME) or high (Hi-ME) metabolizable energy on the body condition score (BCS), body weight (BW) change, and reproductive performances of sheep. Thirty-five Doyogena ewes (27.71 ± 2.87 kg, 2–5 years of age, BCS of 2.0–2.5) grazing on natural pasture were randomly assigned to supplementary treatments consisting of combinations of enset leaf (EL) and commercial concentrate (CC): T0 (control), T1 (250 g EL + 500 g CC: Lo-ME), T2 (400 g EL + 500 g CC; Hi-ME), T3 (500 g EL + 400 g CC; Hi-ME), and T4 (500 g EL + 250 g CC; Lo-ME). The estrous cycle was synchronized with one intramuscular injection, 5 mg PGF2α, prior to artificial insemination. The dry matter (DM) from the pasture provided 1.10–1.46 kg/day, which corresponds to the DM requirements of the ewes until late gestation. However, the pasture provided a protein content of 9.52%, which was insufficient for breeding, mid-gestation, and gestation, requiring minimums of 16.1%, 13.1%, and 14.8%, respectively. The pasture could only provide enough energy for breeding ewes with a BW of up to 30 kg. The energy provided by pasture was insufficient for ewes weighing > 30 kg at mid-gestation and gestation, providing 6.9–9.2 MJ/day, below the requirement of 11.92–16.32 MJ/day required for mid-gestation and gestation. The energy was not sufficient for large ewes weighing > 40 kg. Supplementary diets T1–T4 provided DM in the range of 1.7–2.29 kg/day. This was sufficient for AI, mid-gestation, and gestation phases. Dietary supplements increased (p < 0.01) BW during breeding and mid-gestation. During lambing, T2 and T3 increased BW (p < 0.05) compared to T4 and T1. T4 had a similar effect (p > 0.05) on BW during lambing. T1, T2, and T3 significantly increased BCS (p < 0.05). T2 and T3 increased (p < 0.05) BCS at mid-gestation, but only T2 significantly increased BCD (p < 0.05) during lambing. All dietary supplements resulted in a shorter (p < 0.05) time to the resumption of estrous and the length of estrous (p < 0.05). T1, T2, and T3 resulted in a stronger estrous response (p < 0.05). Dietary supplements enhanced (p < 0.05) the conception rate and fecundity rate. The conception rate was highest in T2 and T3 at 85.7% and 83.3%, respectively. T2 had the highest fecundity rate at 151.7% (p < 0.05). Dietary supplementation increased the rate of lambing (LR), litter size (LS), and weight of lambs at birth (LBW). The LR for treatments T2, T3, and T4 was 100% versus 66.7% in the control. T1 and T2 significantly increased (p < 0.05) LS, but T4 had a similar LS to the control. Dietary supplements T1, T3, and T4 tended to increase (p < 0.05) LBW, but T2 increased LBW significantly (p < 0.05). Supplementation (T2, T3) with 400 g enset + 500 g CC and 500 g enset + 400 g CC are promising feed supplements to increase the reproductive capacities of Doyogena ewes in Ethiopia. Energy is as important to ewe flushing as protein.

The objective of this study was to investigate the fermentation characteristics and nutritional value of A. sativa genotypes ensiled either solely or in combination with P. purpureum 16791. Three different A. sativa genotypes (SRCPX80AB2806, ILRI_5527A, and ILRI_5526A) were harvested at the dough stage and ensiled solely or in combination with equal parts of P. purpureum 16791 with the addition of 3% molasses for all treatments in a completely randomized design with three replications over a period of 45 days. P. purpureum harvested at 60 days was ensiled and used as a control treatment. All treatments were evaluated for fermentation characteristics (pH, temperature, physical properties, and flieg point) and subjected to chemical analysis. The results showed that ensiling A. sativa ILRI_5527A, in combination with equal parts of P. purpureum 16791, produced the best silage with a significantly lower pH of 3.52. Optimal temperature (25 °C), nutrient losses based on the total dry matter (2.17%), gas (3.74%), and effluent (4.28%) were significantly (p < 0.0001) lower for T6 compared to the others. The dry matter recovery rate of T6 was significantly (p < 0.0001) higher than that of the others. T6 ranked first in the quality of physical properties (smell, color, mold, and texture). The highest dry matter (24%), organic matter (96.80%), crude fat (3.32%), and metabolizable energy (10.05 MJ/kg DM) were recorded for T6. The flieg score for T6 silage (96.6%) was also better than the others. In conclusion, ensiling A. sativa ILRI_5527 with equal parts of P. purpureum 16791 and the addition of 3% molasses improved fermentation characteristics and silage quality.