In order to enhance salt rejection level and high pressure mechanical integrity, functionalized nanokaolin decorated multiwall carbon nanotubes (FNKM, 0–5 wt % loading) were incorporated into a cellulose acetate (CA) matrix using high temperature solution mixing methodology. Scanning electron microscopy (SEM), X-ray diffraction technique (XRD), thermo-gravimetric analyzer (TGA) and Fourier transform infrared spectrometer (FTIR) were used to characterize the prepared membranes. The obtained results revealed that with increasing FNKM concentration in the host polymeric matrix, composite membrane’s structural, functional, thermal, water permeation/flux and salt rejection characteristics were also modified accordingly. Percent enhancement in salt rejection was increased around threefold by adding 5 wt % FNKM in CA.
1 August 2016 in IOP Conference Series: Materials Science and Engineering
In this study, silane activated nanoclay was reinforced in styrene butadiene rubber (SBR) to enhance the thermal resistance/stability and mechanical properties of SBR. silane activated nanoclay with variant concentrations was impregnated in the rubber matrix to fabricate polymer nanocomposites under control processing conditions. Experimental thermal transport, thermal oxidation, phase transition study, and mechanical properties of the nanocomposite specimens were carried out. Thermal insulation, thermal stability, and heat flow response were remarkably enhanced with the addition of nanokaolinite in the polymer matrix. Phase transition temperatures, their corresponding enthalpies, tensile strength, elastic modulus, elongation at break and hardness of the rubber composites were positively influenced with the filler incorporation into the host matrix. The Even dispersion of nanoreinforcements, morphological and compositional analyses of the thermal transport tested specimens were performed using scanning electron microscopy and energy dispersive spectroscopy, respectively.
30 November 2024 in Journal of Advanced Research in Micro and Nano Engineering
This research introduces a finite element model tailored explicitly to assess the mechanical characteristics inherent in MXene/polymer nanocomposite. The primary focus revolves around elucidating the performance attributes through numerical simulations and subsequently aligning these findings with experimental data. The numerical analysis not only predicts mechanical behaviours but also aims to correlate these insights with experimental results obtained from fabricated epoxy nanocomposites within the study's scope. By employing this simulation-driven approach, the study investigates a deeper understanding of the mechanical response, particularly focusing on the materials' tensile properties. From the experimental results, the MXene/epoxy nanocomposite sample exhibited the highest tensile strength and modulus, measuring 50.1 MPa and 7.13 GPa, respectively. The simulation results were 50.08 MPa and 6.95 GPa, showing a difference of less than 3%. Small discrepancies in Young's modulus between the experimental and simulation results may arise from inherent sample heterogeneity. This heterogeneity, which includes microstructural variations, impurities, or defects, contrasts with the idealized homogeneous structures assumed in simulations. This research endeavours to advance predictive modelling techniques, offering valuable insights that can potentially streamline the manufacturing process and optimize MXene-based polymer composites. The goal is to tailor these materials with precise mechanical properties, ensuring their enhanced performance in various applications.
1 February 2018 in International Journal of Materials, Mechanics and Manufacturing