Muhammad Shahid Rafique

Muhammad Shahid Rafique


Research Focus & Metrics

Academic Career Length

20Years (2007-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
1 September 2014 in Matéria (Rio de Janeiro)
Verified
Journal Article
Open access
PDF file
AUAsim Umer
Asim Umer
SNShahid Naveed
Shahid Naveed
NRNaveed Ramzan
Naveed Ramzan
MRMuhammad Shahid Rafique
Muhammad Shahid Rafique
IAImran Asjad
Imran Asjad
Chemical Reduction technique was employed to prepared highly stable and dispersed Copper nanoparticles using L-Ascorbic Acid (Vitamin C) as reducing as well as capping agent. In this technique, cupric chloride was used as precursor. The effects of different molar ratios of L-Ascorbic Acid on the concentration and size of copper nanoparticles were studied. The Copper nanoparticles were characterized by X-Ray Diffraction, Atomic Absorption Spectrometry, and Fourier Transform Infrared Spectrometry. The results show that with the increase in the molar ratio of L-ascorbic acid the concentration of Copper nanoparticles were also increased. The average particles size of copper nanoparticle was found in the range of 50-60 nm. The product was kept in ambient conditions for three month but no sedimentation or separation was observed. The use of ascorbic acid makes the process a non-toxic, cost effective and environmental friendly green method.

1 September 2007 in Laser Physics
Verified
Journal Article
Closed access
PDF file
MRMuhammad Shahid Rafique
Muhammad Shahid Rafique
MKM. Khaleeq-Ur-Rahman
M. Khaleeq-Ur-Rahman
TFT. Firdos
T. Firdos
KAK. Aslam
K. Aslam
MAM. Shahbaz Anwar
M. Shahbaz Anwar
HLH. Latif
H. Latif
A pulsed Nd:YAG laser (10 mJ, 12 ns, 1064 nm) was employed to study the IR irradiation effects on metallic samples of cadmium. The laser was irradiated for 100, 200, and 300 shots under a vacuum ∼10−3 Torr. The results were investigated using a Hi Tech S3000H Scanning Electron Microscope (SEM) and X’pert Pro PANalytical X-ray Diffractometer (XRD). The micrographs obtained from SEM reveal that the surface morphological changes have occurred in the form of a crater. The forward expansion of plasma into an ambient gas coupled with the recondensation of the target surface results in the formation of debris. Large temperature gradients produce variations in the thermal resistance that leads to the distributed shape of the heat-affected zone. The hydrodynamic effects are apparent with a liquid flow to form the recast material around the periphery of the laser focal area. The turbulent resolidified material is formed when surface asperities are accelerated away from the liquid surface during each laser pulse due to melting followed by the thermal expansion of the liquid. The positive feed back of the repeated pulses resulted in the form of ripples. Grains appear on the surface as evidence of heterogeneous nucleation. The confirmation of the formation of these structures has been done by X-ray Diffractometer (XRD).

28 February 2007 in Laser and Particle Beams
Verified
Journal Article
Closed access
PDF file
SBShazia Bashir
Shazia Bashir
MRMuhammad Shahid Rafique
Muhammad Shahid Rafique
FUFaizan Ul-Haq
Faizan Ul-Haq
The effects of multiple pulses of a CO2 laser with energy of 2.5 J and pulse duration of 200 ns on the surface morphology of ion irradiated CR-39 is investigated in light of the modification in its track registration properties. For this purpose, a CR-39 was exposed by a CO2 laser generated hydrogen, argon, cadmium, air molecular ions (N2 and O2, etc.), high energy (300 KeV) proton beam from Cock Croft Walton accelerator, and α (5 MeV) from 0.5 μCi Pu239 source. The registered tracks were enlarged after 6 h of 6.25 N NaOH etching. These etched detectors were then exposed to different number of CO2 laser shots. The etched detectors were then analyzed by a computer controlled optical microscope (Lexica DMR series). It was observed that even a single shot of CO2 laser, irrespective of the registered ions tracks, can change the track registration properties of CR-39, and can remove the vaporization resistant skin present on the polymer (CR-39). A significant change in track density and track shaping regardless of the ions is observed. At the outside of the focal area, the ion density of different registered tracks is compared graphically before and after laser irradiation. Laser ablation of unexposed CR-39 is also done with multiple pulses CO2 laser. In this regard, the coherent and non-coherent structures, diffraction patterns, circular fringes with corrugations and ripples, droplets, chain like structures with cluster formation, chain folded crystallites, and hole drilling were observed. The irradiation induced ablation of the polymer is of great importance in electronics industry, lithography, etc.

18 June 2010 in Applied Physics A
Verified
Journal Article
Closed access
PDF file
MRMuhammad Shahid Rafique
Muhammad Shahid Rafique
SBShazia Bashir
Shazia Bashir
AAAli Ajami
Ali Ajami
WHWolfgang Husinsky
Wolfgang Husinsky

1 January 2017 in Chinese Physics B
Verified
Journal Article
Closed access
PDF file
NANisar Ali
Nisar Ali
SBShazia Bashir
Shazia Bashir
UKUmm- I- Kalsoom
Umm- I- Kalsoom
MRMuhammad Shahid Rafique
Muhammad Shahid Rafique
NBNarjis Begum
Narjis Begum
CNChandra S. R. Natahala
Chandra S. R. Natahala
The surface, structural, and mechanical properties of zirconium after irradiation with Ti: sapphire laser (800 nm, 30 fs, 1 kHz) have been investigated. The zirconium targets were exposed for a varying number of laser pulses ranging from 500 to 2000 at a fixed fluence of 3.6 J/cm2 corresponding to an intensity of 1.2×1014 W/cm2 in ambient environments of de-ionized water and propanol. A scanning electron microscope (SEM) was employed to investigate the surface morphology of the irradiated zirconium. The SEM analysis shows the formation of various kinds of features including nanoscale laser induced periodic surface structures (LIPSS), sponge like surface structure, flakes, conical structures, droplets, pores, and cavities. The energy dispersive x-ray spectroscopy (EDS) analysis exhibits the variation in chemical composition along with an enhanced diffusion of oxygen under both ambient conditions. The crystal structure and phase analyses of the exposed targets were explored by x-ray diffraction (XRD) and Raman spectroscopy techniques, respectively. The XRD analysis confirms the presence of various phases of zirconium hydride and zirconia after ablation in both de-ionized water and propanol. However, excessive hydrides are formed in the case of propanol. The Raman analysis supports the EDS and XRD results. It also reveals the presence of oxides (zirconia) after irradiation in both de-ionized water and propanol environments. The chemical reactivity of zirconium was significantly improved in the presence of liquids which were accountable for the growth of novel phases and modification in the chemical composition of the irradiated Zr. A nanohardness tester was employed to measure the nanohardness of the laser treated targets. The initial increase and then decrease in nanohardness was observed with an increase in the number of laser pulses in the de-ionized water environment. In the case of propanol, a continuous decrease in hardness was observed.

21 April 2016 in Nanomaterials
Verified
Journal Article
Open access
PDF file
AAAmina Afzal
Amina Afzal
MRMuhammad Shahid Rafique
Muhammad Shahid Rafique
NINadeem Iqbal
Nadeem Iqbal
AQAsif Ali Qaiser
Asif Ali Qaiser
AAAbdul Waheed Anwar
Abdul Waheed Anwar
SISadia Sagar Iqbal
Sadia Sagar Iqbal
In order to enhance salt rejection level and high pressure mechanical integrity, functionalized nanokaolin decorated multiwall carbon nanotubes (FNKM, 0–5 wt % loading) were incorporated into a cellulose acetate (CA) matrix using high temperature solution mixing methodology. Scanning electron microscopy (SEM), X-ray diffraction technique (XRD), thermo-gravimetric analyzer (TGA) and Fourier transform infrared spectrometer (FTIR) were used to characterize the prepared membranes. The obtained results revealed that with increasing FNKM concentration in the host polymeric matrix, composite membrane’s structural, functional, thermal, water permeation/flux and salt rejection characteristics were also modified accordingly. Percent enhancement in salt rejection was increased around threefold by adding 5 wt % FNKM in CA.