Marzieh Rohaninasab

Dr. Marzieh Rohaninasab


Research Focus & Metrics

Academic Career Length

14Years (2013-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
29 September 2020 in Clinical and Experimental Dental Research
Verified
Journal Article
Open access
PDF file
ASAida Saffarpour
Aida Saffarpour
SVSara Valizadeh
Sara Valizadeh
AAAbolghasem Amini
Abolghasem Amini
MKMohammad‐Javd Kharazifard
Mohammad‐Javd Kharazifard
MRMarzieh Rohaninasab
Marzieh Rohaninasab
Aim: This study assesses the effect of matrix metalloproteinases on microtensile bond strength (μTBS) of an etch‐and‐rinse adhesive system.Methods: This in vitro study evaluated 88 extracted premolars. The teeth were sectioned to expose dentin and were then randomly divided into four groups (n= 22). In group 1 (control), dentin surface was etched, and Adper Single Bond 2 was applied. In groups 2–4, dentin surface was etched and chlorhexidine (CHX), 1‐ethyl‐3‐(3‐dimethylaminopropyl) carbodiimide (EDC), and dimethyl sulfoxide (DMSO) were applied on the surfaces, respectively, and blotted dry. Next, Adper Single Bond 2 was applied and all teeth were built up with Z350 composite. In each group, half the samples immediately and the other half after 10,000 thermal cycles underwent μTBS test. Data were analyzed using ANOVA and Tukey's test (α= .05).Results: In thermocycled samples, maximum μTBS was noted in CHX group followed by DMSO, EDC, and control group (p < .001). The thermocycled μTBS of composite to dentin was significantly higher in CHX group compared with EDC, DMSO, and control groups (p < .001) but was not significantly different in EDC and DMSO groups (p= .498).Conclusion: The thermocycled μTBS obtained by the application of CHX, EDC, and DMSO was significantly higher compared with the value to the control group.

1 January 2019 in Dental Research Journal
Verified
Journal Article
Open access
PDF file
MRMarzieh Rohaninasab
Marzieh Rohaninasab
HAHomayoon Alaghehmand
Homayoon Alaghehmand
Ali BijaniAli Bijani
Ali Bijani
Background: Bleaching may affect the bond strength of existing composite fillings and may weaken it. Hence, the aim of this study was to find the best method of in-office bleaching with the least effect on microshear bond strength (MSBS) of existing composite resin fillings to tooth structure. Materials and Methods: In this in vitro study, Class V cavities were prepared on buccal surface of 50 extracted third human sound molars. The cavities in 25 teeth had enamel axial walls, Group E, which were divided into five subgroups of E1 through E5 and in 25 teeth had dentin axial walls, Group D, which were divided into five subgroups of D1 through D5. Cavities were treated with Single Bond 2 adhesive system and restored with composite resin (Z250). The corresponding subgroups received similar bleaching methods and materials; 1 – not bleached, 2 – hydrogen peroxide (HP) 25%, 3 – HP + ultraviolet light, 4 – HP + light-emitting diode-curing device, and 5 – HP + diode laser. Teeth colors were monitored before and after bleaching, and MSBS test and failure modes were examined. Results were analyzed with one-way ANOVA and Kruskal–Wallis tests. P < 0.05 was considered significant. Results: One-way ANOVA did not show differences in MSBS of enamel subgroups but showed significant differences in dentin subgroups (P < 0.00). Adhesive fracture in all of the subgroups was the most frequent mode of failure. Kruskal–Wallis test showed that laser was the most effective instrument to change ΔE. Conclusion: Diode laser was the best method for tooth bleaching because lowering the shear bond strength between composite resin and enamel was minimum and also had the most ΔE in tooth bleaching.

1 March 2013
Verified
Open access
PDF file
MRMarzieh Rohaninasab
Marzieh Rohaninasab
MSMandana Sattari
Mandana Sattari
HAHorrieh Abedi
Horrieh Abedi
NZNafise Zarenejad
Nafise Zarenejad

1 January 2024 in International Journal of Dentistry
Verified
Journal Article
Open access
SHSedighe Sadat Hashemikamangar
Sedighe Sadat Hashemikamangar
MMMohammadreza Khadivi Moghadam
Mohammadreza Khadivi Moghadam
MVMahtab Vahedi
Mahtab Vahedi
MRMarzieh Rohaninasab
Marzieh Rohaninasab
NCNasim Chiniforush
Nasim Chiniforush
Aim. The aim of this study was to assess the color changes in artificially induced incipient caries after photodynamic therapy (PDT) using different concentrations of methylene blue and toluidine blue, along with irrigation using water and hypochlorite. Materials and Methods. Forty‐two sound human premolar teeth were used to create two artificial incipient carious lesions. One lesion was placed on the buccal surface and the other on the lingual surface. The color of these artificial incipient carious surfaces was determined using the CIE L  ∗ a  ∗ b  ∗ color system. The teeth were then randomly assigned to 12 groups (n = 7) based on the PDT method. These methods included methylene blue with concentrations of 50, 100, and 150 µg/mL, followed by water irrigation, methylene blue with concentrations of 50, 100, and 150 µg/mL, followed by hypochlorite solution irrigation, toluidine blue with concentrations of 50, 100, and 150 µg/mL, followed by water irrigation, and toluidine blue with concentrations of 50, 100, and 150 µg/mL, followed by hypochlorite solution irrigation. The teeth underwent a colorimetry procedure again, and the resulting color changes were calculated. A three‐way ANOVA was performed to analyze the effects of laser wavelength, concentration of the light‐absorbing material, and irrigation solution on ΔE. Results. The results showed that the color changes caused by toluidine blue photosensitizer at a concentration of 100 µg/mL, with both water and hypochlorite irrigation, were not noticeable to the naked eye (ΔEwater = 3.04, ΔEhypochlorite = 2.00). However, in the other study groups, the color changes were perceptible (ΔE > 3.3). There were no significant differences in ΔE between different concentrations of methylene blue and toluidine blue when using either water or hypochlorite irrigation (P > 0.05). A significant difference was observed between methylene blue and toluidine blue at a concentration of 100 µg/mL with water irrigation (P = 0.006). Additionally, a significant difference was found between methylene blue and toluidine blue at a concentration of 100 µg/mL with hypochlorite irrigation (P = 0.049). However, no significant differences were observed between methylene blue and toluidine blue at other concentrations with either water or hypochlorite irrigation (P > 0.05). Conclusion. In conclusion, tooth color in teeth with incipient caries did not change significantly after PDT using toluidine blue (the photosensitizer) at a concentration of 100 µg/mL with either water or 1% hypochlorite solution irrigation for 5 s.

1 June 2023 in Dental Research Journal
Verified
Journal Article
Open access
SHSedighe Sadat HashemiKamangar
Sedighe Sadat HashemiKamangar
SJSoheil Jafari
Soheil Jafari
MRMarzieh Rohaninasab
Marzieh Rohaninasab
Background: Despite the improvements in optical properties of composite resins, their color stability is still a matter of concern. This study aimed to assess the curing time and intensity and polishing technique on color stability of bleach-shade composite resins. Materials and Methods: In this in vitro, experimental study, 128 discs (1 mm × 8 mm) were fabricated from two composite resins. The specimens fabricated from each composite were assigned to 8 subgroups (n = 8) based on the curing time and intensity and polishing with polishing points or discs. After polishing, the color parameters of specimens were measured by EasyShade spectrophotometer according to the CIEL* a*b* color system. The specimens were then immersed in tea solution, and their color parameters were measured again. Color change (ΔE) was calculated and analyzed at 0.05 level of significance. SPSS 25 was used for data analysis. Univariate four-way ANOVA was applied to assess the effects of composite type, curing time, curing intensity, and technique of polishing on ΔE of composite resins. Since the interaction effects were significant, subgroup analysis was performed by t-test. The level of significance for this test was set at 0.05. Results: The effects of curing intensity and polishing technique were significant on ΔE (P < 0.05). Filtek Z350 XBW composite specimens polished by polishing points experienced lower color change than those polished with discs. The minimum ΔE of Gradia XBW composite was recorded in specimens that underwent high-intensity curing for 20 s and were polished with polishing points while the maximum ΔE was recorded in specimens that underwent high-intensity curing for 20 s and were polished with discs. Conclusion: In all groups except on (Filtek, polishing with Disk, curing time = 20 s), high-intensity curing and polishing with polishing points were more effective and caused lower color change compared with low-intensity curing and polishing with discs.

25 March 2026 in Biomaterial Investigations in Dentistry
Verified
Journal Article
Open access
FFFatemeh Farshad
Fatemeh Farshad
EEErfan Eskandari
Erfan Eskandari
MRMarzieh Rohaninasab
Marzieh Rohaninasab
Self-adhering composites (SACs) are designed to simplify dental procedures by eliminating the need for separate adhesive systems. These materials are indicated for small Class I and Class V cavities, noncarious cervical lesions, and as liners in Class I and II restorations. Despite their advantages, the long-term durability and clinical performance of these composites compared to conventional composites (CCs) is a question. This study aims to compare post-treatment complications, including marginal adaptation, postoperative sensitivity, marginal discoloration, marginal gap, and microleakage, between CCs and SACs. In February 2024, a comprehensive search was conducted using PubMed, Google Scholar, Scopus, and Web of Science databases. No filters were applied during the search. Keywords included ‘resin composite restoration’, ‘post-operative sensitivity’, ‘marginal adaptation’, ‘marginal gap’, and ‘microleakage’. Studies were selected based on inclusion criteria (clinical trials, English-language, focusing on SACs vs. CCs) and exclusion criteria (nonindexed studies, conference abstracts, editorials, case reports, review articles, or pre-2019 studies). From 361 articles, 148 remained after removing duplicates and title screening. Out of 148 records found in databases, six records were selected for this study. Data showed that SACs and CCs have comparable marginal adaptation, postoperative sensitivity, marginal discoloration, and retention in conservative restorations. SACs showed slightly higher microleakage in some cases. Overall, the clinical performance of SACs were comparable to that of CCs. Thus, SACs can be a practical alternative for simplifying restorative procedures. However, their potential for higher microleakage needs further investigation through long-term clinical studies.