Carbon capture and storage (CCS) is broadly recognised as having the potential to play a key role in meeting climate change targets, delivering low carbon heat and power, decarbonising industry and, more recently, its ability to facilitate the net removal of CO2 from the atmosphere. However, despite this broad consensus and its technical maturity, CCS has not yet been deployed on a scale commensurate with the ambitions articulated a decade ago. Thus, in this paper we review the current state-of-the-art of CO2 capture, transport, utilisation and storage from a multi-scale perspective, moving from the global to molecular scales. In light of the COP21 commitments to limit warming to less than 2 °C, we extend the remit of this study to include the key negative emissions technologies (NETs) of bioenergy with CCS (BECCS), and direct air capture (DAC). Cognisant of the non-technical barriers to deploying CCS, we reflect on recent experience from the UK's CCS commercialisation programme and consider the commercial and political barriers to the large-scale deployment of CCS. In all areas, we focus on identifying and clearly articulating the key research challenges that could usefully be addressed in the coming decade.
24 May 2010 in Journal of Chemical & Engineering Data
We report measurements of the diffusion coefficients of CO2 and N2 in pure water at temperatures between (298.15 and 423.15) K and pressures between (15 and 45) MPa. The measurements were made by the Taylor dispersion method and have a standard relative uncertainty of 2.3 %. The results were found to be essentially independent of pressure over the range investigated and a simple relation, based on the Stokes–Einstein equation, is proposed to correlate the experimental data. Some experimental difficulties arising in the measurement of the diffusivities of slightly soluble acid-gas solutes such as CO2 in water are also discussed.
1 January 2013 in The Journal of Supercritical Fluids
An analytical apparatus has been designed to study the phase behavior of fluid mixtures of relevance to CO2-enhanced oil recovery and carbon dioxide storage in deep aquifers or depleted oil fields. The fluid phases are circulated by means of a dual-channel magnetically-coupled pump and aliquots may be withdrawn from the re-circulation loops, by means of high-pressure sampling valves, for analysis by gas chromatography. The high-pressure cell is fitted with a special probe that may be rotated in order to draw liquid into the re-circulation loop from different heights within the cell, thereby permitting the study of three-phase vapor–liquid–liquid equilibria. The working temperature range of the apparatus is from (298 to 448) K and the maximum working pressure is 50 MPa. In this work, measurements have been made on the binary system (CO2 + H2O) at temperatures from (298.15 to 448.15) K and pressure from (1.5 to 18.0) MPa, and the results are compared with the available literature data. Vapor–liquid–liquid and liquid–liquid equilibrium points were also measured at T = 298.15 K. Standard uncertainties were 0.04 K for temperature, 0.04% of reading for pressure, and typically 3 × 10−4 and 8 × 10−4 for the mole fractions in liquid and vapor phases respectively. The results have been correlated by means of an asymmetric approach based on the Peng–Robinson equation of state, for the vapor phase, and an extended form of Henry's law incorporating the NRTL solution model, for the aqueous liquid-phase. The ability of the Krichevsky–Kasarnovsky (KK) approach to correlate the data has also been evaluated.
1 March 2012 in Journal of Chemical & Engineering Data