An underwater electrical discharge in a narrow dielectric capillary provides the details of the evolution of microbubbles to plasma as formed by a tungsten electrode inserted in the capillary. An increase in the applied voltage forms microbubbles after water fills the capillary. A further increase in the voltage generates a surface discharge through the boundary of the bubble, elongating the bubble shape, and eventually forming plasma by electrical breakdown. This produces atomic oxygen, atomic hydrogen, and hydroxyl radicals from dissociation of water vapor. Also, a bactericidal test in normal saline solution showed that more than 99.6% of the bacterial cells were killed within 8 s, resulting from chlorine-containing species, in particular hypochlorous acid as a major bactericidal agent.
CO2 was converted to synthesis gas in a microwave plasma–catalytic reactor by methane reforming at atmospheric pressure. The hybrid system used waste heat from the plasma to heat the catalyst. Conversion degrees were examined as a function of gas temperature, and the reforming efficiency of the plasma-only system was compared with that of the hybrid system. As a result, the hybrid system was shown to be more efficient under catalyst-free conditions. The use of microwave plasma alone resulted in low conversions of CO2 and CH4, which were 32.9% and 42.7%, respectively, at 3 kW microwave power. High CO2 and CH4 conversions of 87.9% and 92.9%, respectively, were achieved in the presence of catalyst at the same microwave power. At constant microwave power, catalyst addition increased the H2 and CO mass yield rates to 0.27 kg/h and 2.012 kg/h, respectively. Additionally, the H2 energy yield were 270 g/h, and 91.2 g/kWh. Thus, the developed hybrid system is well suited for efficient and economically viable CO2 reduction and synthesis gas production, paving the way for next-generation CO2 utilization and zero-emission industrial processes.
An atmospheric microwave plasma torch is presented for post-pump destruction of perfluorocompound gases (PFCs), which are used widely in the semiconductor industry and are emitted with nitrogen gas for vacuum pump purges. Discharges of the microwave plasma torch are well suited for abatement of PFC contaminants discharged at a typical flow rate. The abatement was carried out using oxygen or air as additive gases. Analytical results are systematically compared to quadrupole mass spectroscopy and Fourier transform infrared (FTIR) data in the laboratory. Destruction and removal efficiency of more than 99% in FTIR data was achieved for carbon tetrafluoride.