Geon Woo Yang

Geon Woo Yang


Research Focus & Metrics

Academic Career Length

8Years (2019-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
22 March 2019 in Catalysts
Verified
Journal Article
Open access
PDF file
SCsemin chun
semin chun
DSDong Hun Shin
Dong Hun Shin
SMSuk Hwal Ma
Suk Hwal Ma
GYGeon Woo Yang
Geon Woo Yang
YHYong Cheol Hong
Yong Cheol Hong
CO2 was converted to synthesis gas in a microwave plasma–catalytic reactor by methane reforming at atmospheric pressure. The hybrid system used waste heat from the plasma to heat the catalyst. Conversion degrees were examined as a function of gas temperature, and the reforming efficiency of the plasma-only system was compared with that of the hybrid system. As a result, the hybrid system was shown to be more efficient under catalyst-free conditions. The use of microwave plasma alone resulted in low conversions of CO2 and CH4, which were 32.9% and 42.7%, respectively, at 3 kW microwave power. High CO2 and CH4 conversions of 87.9% and 92.9%, respectively, were achieved in the presence of catalyst at the same microwave power. At constant microwave power, catalyst addition increased the H2 and CO mass yield rates to 0.27 kg/h and 2.012 kg/h, respectively. Additionally, the H2 energy yield were 270 g/h, and 91.2 g/kWh. Thus, the developed hybrid system is well suited for efficient and economically viable CO2 reduction and synthesis gas production, paving the way for next-generation CO2 utilization and zero-emission industrial processes.

1 October 2021 in IEEE Transactions on Plasma Science
Verified
Journal Article
Closed access
HLHeejae Lee
Heejae Lee
GYGeon Woo Yang
Geon Woo Yang
YSYongwook Shin
Yongwook Shin
KKKangil Kim
Kangil Kim
YHYong Cheol Hong
Yong Cheol Hong
Numerous reports have elucidated different methods for treating dyeing wastewater using UV irradiation, ozonation, and chlorination. However, the high operational costs of these methods have necessitated the use of plasma. In this study, dielectric barrier discharge (DBD) was used to purify dyeing wastewater, generating ozone as a byproduct. An underwater DBD plasma system was designed to directly interact with water, thereby producing reactive oxygen species (ROS) and functioning as a powerful oxidizer. Additionally, UV, O 3 , and H 2 O 2 are generated by the developed plasma system without using any other additives to produce OH radicals for purifying organic pollutants; therefore, this system circumvents the use of complex and advanced oxidation processes. A simulation test was performed, which revealed that methylene blue and rhodamine B were completely removed within 7 and 3 min, respectively. Therefore, the developed plasma system can be successfully applied for the purification of dyeing wastewater.

1 September 2022 in Physics of Plasmas
Verified
Journal Article
Closed access
PDF file
GYGeon Woo Yang
Geon Woo Yang
SCsemin chun
semin chun
KKKang I. Kim
Kang I. Kim
HLHee J. Lee
Hee J. Lee
YHYongcheol Hong
Yongcheol Hong
The emission of odorous gases from various industrial processes such as factories and wastewater treatment, in addition to emissions from landfills and livestock, has become a public concern because of their negative effect on air quality and human health. This study presents a technology based on dielectric barrier discharge (DBD) of wire-mesh type with a high-voltage electric wire as the electrode. This system was used to experimentally assess the removal efficiency of odorous gases. The plasma system consists of a wire electrode with a mesh-type configuration, a small blower (1.6 N m3/min, compressed air) for the plasma discharge or to supply cooling gas, and an AC high-voltage power supply. The plasma system offers the advantages of low power consumption and a large discharge area for ozone production. The wire-mesh electrode DBD comprises 64 discharge nodes, and the large amount of ozone generated from these nodes is used to oxidize odorous gases. Under optimized conditions, ozone is stably generated at the rate of 5.1 g/h for a specific input energy of 3.7 J/L. The ozone and odorous compounds (H2S: 4.5 ppm, CH3SH: 6.7 ppm, NH3: 3 ppm, outlet concentration) are injected into the main blower (20 N m3/min, compressed air). Finally, the experiments designed to simulate the removal of odorous gases confirmed that 99% of odorous compounds were removed using the wire-mesh electrode DBD. The cost-effectiveness and scalability of this system make it highly suitable for use in industrial environments where odorous gases are produced.

12 March 2024 in Chemosphere
Verified
Journal Article
Closed access
GYGeon Woo Yang
Geon Woo Yang
HLHeejae Lee
Heejae Lee
KKKangil Kim
Kangil Kim
SCSe Min Chun
Se Min Chun
SJSang Yun Jeong
Sang Yun Jeong
YHYong Cheol Hong
Yong Cheol Hong

19 September 2024 in Plasma
Verified
Journal Article
Open access
PDF file
HKHaekwang Kim
Haekwang Kim
GYGeon Woo Yang
Geon Woo Yang
YHYong Cheol Hong
Yong Cheol Hong
Methylene blue (C16H18ClN3) dye can be decomposed using non-thermal plasma. However, there is a problem in that the maintenance of electrodes and dielectrics is necessary due to the durability and heat generation problems due to the high temperatures. Therefore, in this study, a comparative experiment was performed between the flat DBD plasma module and the diffuser DBD module under the same conditions. For methylene blue decomposition, the characteristic changes in the air flow rate, ozone production rate, energy consumption rate, and decomposition rate were compared. In the experiment, 7 L water was placed in a 15 L reactor, and measurements were performed for approximately 1 h. We performed the same process by setting the initial methylene blue concentration to 143 mg/L. According to the results, the flat DBD module achieved a decomposition rate of 100% in 40 min, an energy yield of 46.7 g/kWh, and an ozone generation amount of 6.5 g/h. The diffuser DBD module achieved a decomposition rate of 90%, an energy production of 24.6 g/kWh, and an ozone generation of 1.97 g/h in 60 min.

14 November 2023 in Applied Sciences
Verified
Journal Article
Open access
PDF file
SCsemin chun
semin chun
GAGeum Ran Ahn
Geum Ran Ahn
GYGeon Woo Yang
Geon Woo Yang
HLHee Jae Lee
Hee Jae Lee
YHYong Cheol Hong
Yong Cheol Hong
Odor and discoloration in water-based cutting fluids are caused by the growth of microorganisms and putrefying bacteria. This significantly reduces cutting performance, prevents rust, and deteriorates the working environment. To overcome these drawbacks, we developed a compact air-cooled coaxial dielectric barrier discharge (DBD) with a bubbler. Bacteria and microorganisms living in waste cutting fluids were sterilized by the high concentration of ozone produced under the optimized conditions of the compact air-cooled coaxial DBD. Moreover, it was confirmed that 99.99% of bacteria and microorganisms were completely removed. Ozone was found to not affect property changes such as the composition, concentration, and pH of the water-based cutting fluids. The chromaticity and complex odor of waste cutting liquids were thus found to have been improved by the effects of microorganism and bacterial sterilization. We conclude that the proposed a compact air-cooled coaxial DBD with a bubbler is an efficient method for sterilizing water-based cutting fluids.