Humanity is a fossil-fueled civilization with a large influence on the environment. The World Health Organization (WHO) has pointed out that air pollution is now the single biggest environmental threat to human health. The air quality in Petroșani, a traditional mining region from the Jiu Valley bituminous coal basin, Romania, is rarely debated; however, it is not often investigated. In this paper, the main air pollution sources of Petroșani are identified and the performed measurements emphasize the air quality in the area of its transit road. The monitoring program set out the objectives, parameters, and points of the monitoring system, as well as the frequency and duration of the program and other monitoring parameters. The equipment used was provided by the National Institute for Research and Development in Mine Safety and Protection to Explosion from Petroșani, within an institutional partnership with the University of Petroșani. The monitoring of the air quality parameters was conducted from March to July 2020, at six points located on the road that crosses the city. It was thus possible to capture a variety of concentrations of the monitored parameters in different weather conditions to determine the air quality in this area. Based on the variation of the measured values in one of the most important historical Romanian bituminous coal mining basins, the preliminary results suggest a worsening of local air quality parameters in relation to the decarbonization process.

Air quality is an essential factor for human health and ecosystem balance, but in regions like Petroșani Mountain Depression, air pollution continues to be a significant challenge. This area, marked by decades of coal mining, is confronted with high concentrations of pollutants, influenced by human activities and the specific geography and climate. This study aims to compare instrumental air quality measurements with snow sample analysis, as a sustainable alternative method. Specifically, it examines the spatiotemporal distribution and evolution of air pollutants, utilizing long-term monitoring data and an extensive sampling network (42 points) for both air and snow, to provide a thorough understanding of air quality dynamics in the area. The experimental part of this study focused on determining VOCs and PM in the air, and dissolved ions (sulfate, calcium, and magnesium) and suspended solids in snow. The results highlight significant correlations between pollution sources and atmospheric dynamics in mountain depressions, while also analyzing the efficiency of the instruments used for data collection. This study emphasizes that, although instrumental methods provide precise and detailed measurements, their implementation in isolated regions presents significant challenges. Therefore, alternative approaches such as snow analysis can represent a more efficient and sustainable option in these regions.

The rapid development of science and technology, and the restructuring of the mining extraction industry, bring about profound changes in the structure and complexity of technological equipment used in mining. In this paper, the Reliability Centered Maintenance (RCM) method has been applied to analyze the components of the KSW-460NE shearer machine, which fails quite frequently. The cutter drums do not match from a constructive point of view, and the concrete operation conditions, alongside the picks (being in direct contact with coal and hard inclusions) and guides are submitted to intense abrasion wear, showing a great number of failures. The data collected following the machine’s exploitation allowed parameter determination characterizing the reliability of the components mentioned, the manner of failure, and the effects. Using calculation methods, it has been possible to facilitate the interpretation of the result in view of establishing measures required to improve maintenance of the dominant components of the machine, determining replacement intervals, in accordance with an imposed reliability and maintainability. The results of the study assist in the choice of suitable hardening materials for the reconditioning of cutter drums and guides that are necessary for practical trials, by which their operating times, and replacement intervals, respectively, might be additionally improved.

Livezeni is one of the few active remaining collieries from Jiu Valley, in the Meridional Carpathian Mountains. Mining waste facilities classification is introduced according to Romanian technical prescription PT-C 39. Preliminary geotechnical studies on the basement rocks and the waste material are necessary to define the maximum height and the slope angle for ensuring the stability of the waste dump. The first step supposes modeling the morphology of the area based on various information sources. The decision on the shape and geometry of the dump could be taken according to various geotechnical, technological, legal and economic aspects involved, based on analysis done on the digital terrain model. A computerized design process allows the possibility to analyze several variants in less time and ensure results that are more accurate and useful in the later stage of building and remediation of the area. This process is illustrated on the waste dump Livezeni.