The trend of increasing traffic demand is causing congestion on existing urban roads, including urban motorways, resulting in a decrease in Level of Service (LoS) and safety, and an increase in fuel consumption. Lack of space and non-compliance with cities’ sustainable urban plans prevent the expansion of new transport infrastructure in some urban areas. To alleviate the aforementioned problems, appropriate solutions come from the domain of Intelligent Transportation Systems by implementing traffic control services. Those services include Variable Speed Limit (VSL) and Ramp Metering (RM) for urban motorways. VSL reduces the speed of incoming vehicles to a bottleneck area, and RM limits the inflow through on-ramps. In addition, with the increasing development of Autonomous Vehicles (AVs) and Connected AVs (CAVs), new opportunities for traffic control are emerging. VSL and RM can reduce traffic congestion on urban motorways, especially so in the case of mixed traffic flows where AVs and CAVs can fully comply with the control system output. Currently, there is no existing overview of control algorithms and applications for VSL and RM in mixed traffic flows. Therefore, we present a comprehensive survey of VSL and RM control algorithms including the most recent reinforcement learning-based approaches. Best practices for mixed traffic flow control are summarized and new viewpoints and future research directions are presented, including an overview of the currently open research questions.

The prevailing variable speed limit (VSL) systems as an effective strategy for traffic control on motorways have the disadvantage that they only work with static VSL zones. Under changing traffic conditions, VSL systems with static VSL zones may perform suboptimally. Therefore, the adaptive design of VSL zones is required in traffic scenarios where congestion characteristics vary widely over space and time. To address this problem, we propose a novel distributed spatial-temporal multi-agent VSL (DWL-ST-VSL) approach capable of dynamically adjusting the length and position of VSL zones to complement the adjustment of speed limits in current VSL control systems. To model DWL-ST-VSL, distributed W-learning (DWL), a reinforcement learning (RL)-based algorithm for collaborative agent-based self-optimization toward multiple policies, is used. Each agent uses RL to learn local policies, thereby maximizing travel speed and eliminating congestion. In addition to local policies, through the concept of remote policies, agents learn how their actions affect their immediate neighbours and which policy or action is preferred in a given situation. To assess the impact of deploying additional agents in the control loop and the different cooperation levels on the control process, DWL-ST-VSL is evaluated in a four-agent configuration (DWL4-ST-VSL). This evaluation is done via SUMO microscopic simulations using collaborative agents controlling four segments upstream of the congestion in traffic scenarios with medium and high traffic loads. DWL also allows for heterogeneity in agents’ policies; cooperating agents in DWL4-ST-VSL implement two speed limit sets with different granularity. DWL4-ST-VSL outperforms all baselines (W-learning-based VSL and simple proportional speed control), which use static VSL zones. Finally, our experiments yield insights into the new concept of VSL control. This may trigger further research on using advanced learning-based technology to design a new generation of adaptive traffic control systems to meet the requirements of operating in a nonstationary environment and at the leading edge of emerging connected and autonomous vehicles in general.

Modern urban mobility needs new solutions to resolve high-complexity demands on urban traffic-control systems, including reducing congestion, fuel and energy consumption, and exhaust gas emissions. One example is urban motorways as key segments of the urban traffic network that do not achieve a satisfactory level of service to serve the increasing traffic demand. Another complex need arises by introducing the connected and autonomous vehicles (CAVs) and accompanying additional challenges that modern control systems must cope with. This study addresses the problem of decreasing the negative environmental aspects of traffic, which includes reducing congestion, fuel and energy consumption, and exhaust gas emissions. We applied a variable speed limit (VSL) based on Q-Learning that utilizes electric CAVs as speed-limit actuators in the control loop. The Q-Learning algorithm was combined with the two-step temporal difference target to increase the algorithm’s effectiveness for learning the VSL control policy for mixed traffic flows. We analyzed two different optimization criteria: total time spent on all vehicles in the traffic network and total energy consumption. Various mixed traffic flow scenarios were addressed with varying CAV penetration rates, and the obtained results were compared with a baseline no-control scenario and a rule-based VSL. The data about vehicle-emission class and the share of gasoline and diesel human-driven vehicles were taken from the actual data from the Croatian Bureau of Statistics. The obtained results show that Q-Learning-based VSL can learn the control policy and improve the macroscopic traffic parameters and total energy consumption and can reduce exhaust gas emissions for different electric CAV penetration rates. The results are most apparent in cases with low CAV penetration rates. Additionally, the results indicate that for the analyzed traffic demand, the increase in the CAV penetration rate alleviates the need to impose VSL control on an urban motorway.

Today's urban mobility requires results for resolving increasingly complex demands on the traffic management system. Hence, the main problem is to achieve a satisfactory level of service for urban motorways as part of the urban traffic network. In addition, with the introduction of Connected and Autonomous Vehicles (CAVs), additional challenges for modern control systems arise. This study focuses on the Variable Speed Limit (VSL) based on Q-Learning with CAVs as actuators in the control loop. The Q-Learning algorithm is combined with the two-step Temporal Difference target to increase the effectiveness of the algorithm for learning the VSL control policy for mixed traffic flows. Different CAV penetration rates are analyzed, and the results are compared with a rule-based VSL and the no control case. The obtained results show that Q-Learning based VSL can learn the control policy and improve the Total Travel Time and Mean Travel Time for different CAV penetration rates. The results are most apparent in the case of low CAV penetration rates. There is also an indication that the increase of the CAV penetration rate reduces the need for separate VSL control.

Today’s urban motorways cannot fulfill their purpose to simultaneously serve transit and local urban traffic with a high Level of Service. In the case of urban motorway infrastructure, the traditional “build only” approach is not always possible due to the lack of space. This study is focused on the Variable Speed Limit Control (VSLC) as one of the traffic control methods applicable for any type of motorway and Q-learning as one commonly used approach for designing learning based VSLC algorithms. The drawback of this methodology is the representation and exploration of the large state-action space as it is the case in its application for VSLC. This study introduces a Deep Q-Network to approximate the Q-function and presents a novel learning approach for the VSLC application with possibility to track vehicles on the microscopic level. The proposed reward function steers the learning towards the improvement of reward and prevention of oscillation among consecutive speed limits.