High-speed permanent magnet machines, supplied by pulsewidth modulation (PWM) voltage source inverters, operate with distorted stator currents. Harmonics present in these stator currents deteriorate the machine performance by generating losses. Mostly, these losses are following the machine design using a transient finite-element model. The precise measurement of these rotor eddy-current losses is extremely difficult, hence, only a few papers provide convincing comparisons between predictions and measurements. This paper presents a fast and precise analytical approach, verified with measurements, to consider rotor losses of machines, supplied by PWM voltages, already during the design procedure.
Due to development in fields of materials and power electronics, use of high-speed electrical machines has boosted significantly in recent decades. They are widely used in number of applications, such as electrically assisted turbochargers, flywheel energy storage systems, spindle applications, turbo molecular pumps, micro gas turbines. In applications where high efficiency and high power density are required, the most suitable machine type for high-speed operations is a permanent magnet (PM) machine. In this paper the performance of several different topologies of high-speed PM machines required for use in a micro-gas turbine application are evaluated. Different winding topologies, retaining sleeve materials and magnetization patterns are considered, where the main criterion for the machine performance are eddy current losses in the rotor. Influence of time harmonics in stator currents caused by the inverter Pulse Width Modulation (PWM) is incorporated in the calculation.
Rotor losses in inverter-fed permanent magnet (PM) machines depend on stator current waveform and consequently on inverter output voltage. These losses can be very harmful due to the vulnerability of magnets to heat. In this study, the rotor losses in high-speed PM machines supplied by voltage-source PWM inverters were analytically correlated with the inverter switching parameters. An analytical model which shows the dependency of the rotor losses on a frequency modulation ratio was derived. The derived model was verified by a 2D transient finite element model.
A widely used method for the magnetic field calculation in permanent magnet (PM) machines is the harmonic modeling (HM) method. Despite its many advantages, the application of this method is limited to machines in which armature currents, as a source of the magnetic field, are known. Since most of the PM machines are supplied with three-phase voltages, any variation of parameters in the armature electric circuit could lead to the uncertainty in knowing the armature currents, and therefore, limit use of the HM method. In this paper, an approach for overcoming this limitation is presented, which enables the calculation of the magnetic field in the PM machines without a priori knowledge of the armature currents.
This paper presents a method for the performance analysis of high-speed electric machines supplied with pulse-width modulated voltage source inverters by utilizing a fast analytical model. By applying a strict mathematical procedure, effective expressions for the calculation of rotor eddy current losses and electromagnetic torque are derived. Results obtained by the approach suggested in this study are verified by the finite element model, and it is shown that the proposed method is superior in comparison to the finite element method in terms of computation time. The proposed method enables fast parameter variation analysis, which is demonstrated by changing the inverter switching frequency and electric conductivity of the rotor and analyzing the effects of these changes on rotor eddy current losses. The presented work separately models effects of the permanent magnet and pulse-width modulated stator currents, making it suitable for the analysis of both high-speed permanent magnet machines and high-speed induction machines.
Harmonic content of the output voltage of pulse width modulated voltage source inverters (PWM VSI) is determined by the switching frequency. On the other hand, rotor losses in high-speed permanent magnet (PM) machines are caused, among other factors, by harmonics in stator currents. These harmonics are determined by the harmonics in the inverter output voltage, and therefore dependent on the switching frequency. In high-speed PM machines, due to the high fundamental frequency, harmonics in the stator currents caused by PWM are located at very high frequencies. Measurement of rotor losses caused by these harmonics in a structure with a conductive retaining sleeve on the rotor which is prone to eddy currents might be very challenging. This paper investigates issues related to this measurement and presents a measurement method which results are compared with results from a 2D analytical model that takes into account eddy currents in the rotor.