The shortage of clean water is one of the predominant causes of human mortality, especially in remote rural areas. Currently, solar steam generation is being adopted as an efficient, sustainable, and low-cost means for water desalination to produce clean water. However, preventing salt accumulation during operation while maintaining long-term stability and a rapid evaporation rate is a critical challenge that needs to be urgently addressed to further facilitate the practical applications of solar desalination, especially for desalinating high-salinity brine. Here, we demonstrate that a bimodal porous structure (e.g., balsa wood) can serve as an efficient and stable solar vapor generator for high-salinity brine desalination. Taking advantage of the inherent bimodal porous and interconnected microstructures of balsa wood, rapid capillary transport through the microchannels and efficient transport between the micro- and macrochannels through ray cells and pits in the bimodal evaporator can lead to quick replenishment of surface vaporized brine to ensure fast and continuous clean water vapor generation. The bimodal evaporator demonstrates a rapid evaporation rate of 6.4 kg m⁻² h⁻¹ under 6 suns irradiation and outstanding long-term stability for desalination of high salinity brine. The large vessel channels play a critical role in preventing salt from accumulating, as evidenced by controlled experiments with large vessels either blocked in the bimodal evaporator (balsa evaporator) or absent in a unimodal evaporator (e.g., cedar wood) whose porous structure occurs naturally without large vessels. Both approaches demonstrate severe salt accumulation during solar desalination due to a lack of sufficient brine replenishment from the bulk solution beneath. With its unique bimodal porous and interconnected microstructure configuration obtained by a facile and scalable fabrication method, our bimodal porous structured evaporator device represents an efficient, stable, low-cost, and environmentally friendly solar vapor generator for high-salinity brine desalination.

Solar-thermal evaporation is a promising technology for energy-efficient desalination, but salt accumulation on solar absorbers and system longevity are the major challenges that hinder its widespread application. In this study, we present a sustainable Janus wood evaporator that overcomes these challenges and achieves a record-high evaporation efficiencies in hypersaline water, one of the most difficult water sources to treat via desalination. The Janus wood evaporator has asymmetric surface wettability, where the top layer acts as a hydrophobic solar absorber with water blockage and salt resistance, while the bottom hydrophilic wood layer allows for rapid water replenishment and superior thermal insulation. An evaporation efficiency of 82.0% is achieved for 20% NaCl solution under 1 sun, and persistent salt-resistance is observed during a 10-cycle long-term test. To ensure the environmental impact of the Janus wood evaporator, for the first time, a life cycle assessment (LCA) is conducted to compare this Janus wood evaporator with the emerging Janus evaporators, indicating a functional and more sustainable opportunity for off-grid desalination and humanitarian efforts.