In this article, there has been studied the bending state of a reinforced concrete beam with a variable cross-sectional height along its length that rests along its entire length on a brick wall. The beam is under the action of arbitrarily located concentrated forces. The study has been performed on the basis of the original inhomogeneous differential equation of the 4th order, taking into account the external load and the bedding coefficients of the elastic foundation. Using the finite difference method, typical resolving finite difference equations have been obtained. A study of the influence of the degree of elasticity of the base, with a change in the value of the bed coefficients and elasticity parameters, was conducted. The results confirm the reliability of theoretical and practical calculations. Given theoretical provisions and applied results can be used in scientific research in the field of mechanics of a deformable solid body, as well as in practical design.
This article analyzes the causes of the collapse of a high-rise chimney in Petropavlovsk. A study of the factors of long-term (over 60 years) operation of a high-altitude (H=150 m) chimney was carried out. The analysis of the constructive solution of the pipe was carried out, and the study of the operating conditions was performed. To theoretically assess the technical condition and stress-strain state factors (SSS) of the collapsed chimney, automated verification calculations were carried out based on the actual parameters and characteristics obtained during the last technical inspection. An automated verification calculation of SSS factors determining the bearing capacity of an object (its strength, rigidity, reliability, and durability) has been performed. Theoretically, the physical wear of the object has also been carried out. Based on the study of the available technical documentation and conducting a continuous, detailed instrumental examination of the facility, the expert organization established the significant causes that led to the pipe accident.
1 January 2022 in Material and Mechanical Engineering Technology
Dynamic processes in the mechanisms of shock action are investigated. The study is carried out using the contact-classical theory of impact, which combines classical dynamics with static solutions of the theory of elasticity. On this basis, the parameters of the shock pulse are determined: the maximum value of the impact force, the duration of the impact interaction, and the energy transfer coefficient. The obtained dependencies are used to calculate the shaking mechanisms of moulding machines in the foundry. The calculation method is quite general and has a wide range of applications. The results obtained allow us to evaluate the fatigue strength of the parts of the impact mechanism or calculate their...
Целью работы является определение ширины целиков между камерами при отработке рудного месторождения выемочными камерами. Выработка состоит из штреков, пройденных под рудной панелью, и нескольких отработанных камер многоугольного сечения. Напряженное состояние вокруг полевой выработки определяется методом конечных элементов с применением программного комплекса ANSYS в двумерной постановке. Путем анализа напряженного состояния в целиках между камерами разработана методика определения расчетного напряжения в целике. Определены основные факторы, влияющие на напряженное состояние в целике и составлена матрица рационального планирования многофакторных компьютерных экспериментов. Путем проведения этих экспериментов и обработки результатов методом нетрадиционного регрессионного анализа получены аналитические зависимости для определения расчетного напряжения в наиболее нагруженном целике при сопряжении двух, трех и четырех камер. Обоснован коэффициент запаса, учитывающий скол стенки целиков и из расчетов на прочность получены выражения для определения ширины целиков между...
The object of study is a transversely bent triangular plate made of orthotropic material fixed along the edges of the plate under the action of a uniformly distributed load. Fourth-order differential equilibrium equations with variable orthotropy parameters were used. The equations were approximated by finite differences for a grid of scalene triangles. This type of mesh accurately describes the boundary contour of the triangular-shaped plates. The boundary conditions for the mesh consider the orthotropy of the plate material. Seven standard finite-difference equations have been developed considering the boundary conditions along the three edges of the plate and the presence of three angles of an irregularly shaped triangle. A finite difference matrix is obtained. The matrix structure makes calculating a triangular plate at different base angles possible. The boundary conditions were varied in the form of rigid or hinged support of triangular plates. The calculation method considers the orthotropic parameters of the material in two mutually perpendicular planes. The adaptation of the numerical method to the calculation of orthotropic plates of arbitrary shape is described. Relationships are given for determining the rigidity characteristics of orthotropic materials. An algorithm for simple engineering calculation of triangular orthotropic plates is proposed, which makes it possible to perform accurate calculations in variant design.