Wind turbines are often plagued by premature component failures, with drivetrain bearings being particularly subjected to these failures. To identify failing components, vibration condition monitoring has emerged and grown substantially. The fast Fourier transform (FFT) is the major signal processing method of vibrations. Recently, the wavelet transforms have been used more frequently in bearing vibration research, with one alternative being the discrete wavelet transform (DWT). Here, the low‐frequency component of the signal is repeatedly decomposed into approximative and detailed coefficients using a predefined mother wavelet. An extension to this is the wavelet packet transform (WPT), which decomposes the entire frequency domain and stores the wavelet coefficients in packets. How wavelet transforms and FFT compare regarding fault detection in wind turbine drivetrain bearings has been largely overlooked in literature when applied on field data, with non‐ideal placement of sensors and uncertain parameters influencing the measurements. This study consists of a comprehensive comparison of the FFT, a three‐level DWT, and the WPT when applied on enveloped vibration measurements from two 2.5‐MW wind turbine gearbox bearing failures. The frequency content is compared by calculating a robust condition indicator by summation of the harmonics and shaft speed sidebands of the bearing fault frequencies. Results show a higher performance of the WPT when used as a field vibration measurement analysis tool compared with the FFT as it detects one bearing failure earlier and more clearly, leading to a more stable alarm setting and avoidable, costly false alarms.
Dynamic simulations are often used to evaluate the vibrational response of rolling-element bearings experiencing defects. Previously, the optimal accelerometer position has been found to be as close as possible to the bearing. However, further details about the influence of rotational symmetry have not been closely investigated. This paper presents a dynamic simulation model of a radially loaded complete spherical roller bearing with a defect in the inner ring and placed in a housing with 72 equally spaced accelerometer positions around the circumference. Surface accelerations have been extracted and transformed into the frequency domain. Thereafter, the vibrational components indicating the defect have been evaluated around the circumference. The results show an optimal position as close as possible to the primary loaded zone and validation test rig experiments show a reasonable qualitative agreement.
26 October 2023 in Annual Conference of the PHM Society
This paper presents an end-to-end condition monitoring co-design model, from vibration measurement to anomaly detection, where conventional signal processing principles are combined with neuromorphic sensing and computing concepts to enable investigations of the potential improvements offered by brain-like information processing technologies. The use of machine learning in condition monitoring became increasingly popular for intelligent fault diagnosis in the last decade, taking advantage of the rapid developments in deep learning. However, the high computational cost of training and using deep neural networks prevents the use of such solutions for analysing the bulk of data generated by the resource constrained edge devices, i.e., the condition monitoring sensor systems, as only a minor fraction of data can be transmitted to the cloud or edge servers for analysis. There is an untapped potential to process this data and thereby improve intelligent fault diagnosis models using event-triggered sensing, spiking neural networks, and neuromorphic processors that substantially can improve the energy efficiency and capacity of embedded machine learning condition monitoring solutions. The proposed co-design model is evaluated on two use-cases involving rolling element bearing failures, one based on a labelled laboratory environment dataset, and one based on a wind turbine drivetrain bearing failure representing a real-world scenario with stochastic changes of machine state and unknown labels of the bearing condition. By adjusting co-design parameters, the resulting hybrid conventional/neuromorphic model show a comparable accuracy in detection performance for the laboratory dataset compared to the state-of-the-art reported in the literature. Similarly, for the wind turbine drivetrain dataset a bearing fault detection time comparable to that in previous work is obtained. This shows the successful implementation of a hybrid conventional/neuromorphic co-design model for condition monitoring applications, offering novel opportunities to investigate performance trade-offs and efficiency improvements enabled by neuromorphic technologies.
1 November 2021 in Insight - Non-Destructive Testing and Condition Monitoring
Wind turbine drivetrain bearing failures continue to lead to high costs resulting from turbine downtime and maintenance. As the standardised tool to best avoid downtime is online vibration condition monitoring, a lot of research into improving the signal analysis tools of the vibration measurements is currently being performed. However, failures in the main bearing and planetary gears are still going undetected in large numbers. The available field data is limited when it comes to the properties of the stored measurements. Generally, the measurement time and the covered frequency range of the stored measurements are limited compared to the data used in real-time monitoring. Therefore, it is not possible to either reproduce the monitoring or to evaluate new tools developed through research for signal analysis and diagnosis using the readily available field data. This study utilises 12 bearing failures from wind turbine condition monitoring systems to evaluate and make recommendations concerning the optimal properties in terms of measurement time and frequency range the stored measurements should have. The results show that the regularly stored vibration measurements that are available today are, throughout most of the drivetrain, not optimal for research-driven postfailure investigations. Therefore, the storage of longer measurements covering a wider frequency range needs to begin, while researchers need to demand this kind of data.
26 October 2023 in Annual Conference of the PHM Society
Nowadays, lots of data are generated in industries using vibration sensors to evaluate the equipment’s working condition and identify faults. A significant challenge is that only a small fraction of data can be transmitted for intelligent fault diagnosis and storage. The edge processing capacity is often insufficient for advanced analysis due to time and resource constraints. The neuromorphic signal encoding scheme efficiently reduces the data rate by encoding relevant signal changes into spike trains while discarding redundant information and noise, enabling energy-efficient neuromorphic processing. Due to the presence of dominant operational features and noise in the original measurements, signal pre-processing is required to extract the relevant features before spike coding and processing. The work investigates the effects of different filter banks (pre-processing methods) on the spike encodings for vibration measurements from bearings. This also includes bearing fault features diagnosis based on statistical analysis of generated spikes. The comparative analysis is made for benchmarking different signal pre-processing methods (e.g., envelope, empirical mode decomposition (EMD), and gammatone filter) on bearing vibration datasets. An event-triggered scheme, i.e., Level-crossing analog-to-digital converters (LC-ADCs) is applied to encode the vibration measurement to spikes. Inter-spike intervals (ISIs) statistics are analysed for fault diagnosis of bearings. The results obtained for CWRU bearing databases indicate a possible fault detection and diagnosis with significant data rate reduction and an opportunity for improved computational efficiency. With the developed approach, the envelope filter is found to be the most efficient of all. This work enables a new approach to improve the energy efficiency of condition monitoring systems and further sets a new course of research development in this area using neuromorphic technologies.