Jyotheeswara Reddy Kalvakurthi

Dr. Jyotheeswara Reddy Kalvakurthi

orcid

Research Focus & Metrics

Academic Career Length

10Years (2017-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
1 January 2018 in IEEE Access
Verified
Journal Article
Open access
JKJyotheeswara Reddy Kalvakurthi
Jyotheeswara Reddy Kalvakurthi
NSNatarajan Sudhakar
Natarajan Sudhakar
Due to the more vigorous regulations on carbon gas emissions and fuel economy, Fuel cell electric vehicles (FCEV) are becoming more popular in the automobile industry. This paper presents a neural network-based maximum power point tracking (MPPT) controller for 1.26-kW proton exchange membrane fuel cell (PEMFC), supplying electric vehicle powertrain through a high voltage-gain dc-dc boost converter. The proposed neural network MPPT controller uses a radial basis function network (RBFN) algorithm for tracking the maximum power point of the PEMFC. High switching-frequency and high voltage-gain dc-dc converters are essential for the propulsion of FCEV. In order to attain high voltage-gain, a three-phase high voltage-gain interleaved boost converter is also designed for FCEV system. The interleaving technique reduces the input current ripple and voltage stress on the power semiconductor devices. The performance analysis of the FCEV system with RBFN-based MPPT controller is compared with the fuzzy logic controller in MATLAB/Simulink platform.

29 July 2022 in IEEE Access
Verified
Journal Article
Open access
ABAdithya Ballaji
Adithya Ballaji
RDRitesh Dash
Ritesh Dash
VSVivekanandan Subburaj
Vivekanandan Subburaj
JKJyotheeswara Reddy Kalvakurthi
Jyotheeswara Reddy Kalvakurthi
DSDurgamadhab Swain
Durgamadhab Swain
SSSarat Chandra Swain
Sarat Chandra Swain
Production of clean, green solar PV (SPV) power in developing countries now becomes a trend because of their economic and technical benefits. Therefore, generating maximum power out of the SPV is a key searchable area. The SPV must produce power at its terminal at their maximum possible power. To reach to the maximum possible power, maximum power point tracker(MPPT) is used in conjunction with SPV. Extracting maximum power from SPV under varying partial shading condition is one of the important factor in performance improvement of SPV. The characteristics of classical MPPT controller is not acceptable under variable shading condition. A clear distinction between global maxima power point from global minima using MPPT technique must be needed for extracting maximum power. This paper proposes a P&O MPPT based particle swarm optimization with improved search space, optimised through Fuzzy Fokker Planck solution. The pre-defined search space has been introduced to provide fine tune to membership function used in Fuzzy logic controller. The partial shading performance has been examined under four different condition such as active partial shading, colour spectrum, dust level and green house gas (GHG) concentration. Both hardware and simulation studies has been carried out for the proposed techniques. The MATLAB simulation result and that of proposed MPPT, offer more and better performance in terms of algorithm convergence by enhancing the efficiency of system under varying shading condition.

24 May 2023 in Sustainability
Verified
Journal Article
Open access
PDF file
RJRamakanta Jena
Ramakanta Jena
RDRitesh Dash
Ritesh Dash
JKJyotheeswara Reddy Kalvakurthi
Jyotheeswara Reddy Kalvakurthi
PPPrasanta Kumar Parida
Prasanta Kumar Parida
Dhanamjayulu ChittathuruDhanamjayulu Chittathuru
Dhanamjayulu Chittathuru
S.M. MuyeenS.M. Muyeen
S.M. Muyeen
Maximum Power Point Tracking (MPPT) is a technique used in photovoltaic (PV) systems to maximize the power output from the solar panel by constantly tracking and adjusting the optimal operating point. To achieve this, various algorithms have been developed, with Particle Swarm Optimization (PSO) being a widely used method. By adjusting the control system’s parameters, PSO can determine the optimal operating point of the solar panel and improve its overall performance. PSO employs swarm intelligence by simulating the behavior of particles to find the best solution for a given problem. Long Short-Term Memory (LSTM) belongs to the family of Recurrent Neural Networks (RNN) in machine learning and is designed to address the limitations of traditional RNNs in capturing long-term dependencies that exist in sequential data. The combination of PSO and LSTM techniques can result in an efficient MPPT algorithm that leverages the benefits of both. PSO is utilized to optimize the control parameters of the MPPT algorithm, while LSTM is used to predict the solar panel’s power output based on historical data. Consequently, this integration can lead to an accurate and efficient MPPT algorithm that can effectively track the solar panel’s maximum power point. In this research article, an effort has been made to control the duty cycle of the converter by suitably controlling the system gain. A Matlab-based Simulink model in conjunction with Python programming has been used to make the system more robust.

15 November 2022 in Sustainability
Verified
Journal Article
Open access
PDF file
RHR. R. Hete
R. R. Hete
SMSanjay Kumar Mishra
Sanjay Kumar Mishra
RDRitesh Dash
Ritesh Dash
JKJyotheeswara Reddy Kalvakurthi
Jyotheeswara Reddy Kalvakurthi
VSVivekanandan Subburaj
Vivekanandan Subburaj
Dhanamjayulu ChittathuruDhanamjayulu Chittathuru
Dhanamjayulu Chittathuru
This research work establishes a relationship between STATCOM and DFIG wind turbines in a transmission network for coordinated operation during grid disturbances. A change in wind gust also produces a variable output nonlinearly, thereby making the system unstable. Assuring bus voltage and proper balance of load angle in all the connected generating stations becomes challenging. Therefore, increasing voltage security at all the lines and further enhancing system stability leads to the placement of STATCOM at the proper location in the transmission line. Appropriate coordinated control of STATCOM and DFIG can lead to adequate power flow in the system. This research includes a multi-objective optimization problem for properly tuning the PI- controller. The voltage at the controlled bus, low-frequency oscillating waveforms, and real power available at the bus under pre-fault and post-fault conditions are identified as objective function parameters. To avoid the overgrowth of error inside the search space due to lack of normalization, this method uses the RMSProp algorithm for proper convergence in the state vector. The coordinated control action has been investigated in the different shunt fault conditions. Again, to enhance the system stability, low voltage ride-through capability has been thoroughly verified using Matlab software.

4 August 2018 in International Journal of Emerging Electric Power Systems
Verified
Journal Article
Closed access
PDF file
JKJyotheeswara Reddy Kalvakurthi
Jyotheeswara Reddy Kalvakurthi
NSNatarajan Sudhakar
Natarajan Sudhakar
SSSaravanan Subramani
Saravanan Subramani
BBB. Chitti Babu
B. Chitti Babu
High switching frequency and high voltage gain DC-DC boost converters are required for electric vehicles. In this paper, a new high step-up boost converter (HSBC) is designed for fuel cell electric vehicles (FCEV) applications. The designed converter provides the better high voltage gain compared to conventional boost converter and also reduces the input current ripples and voltage stress on power semiconductor switches. In addition to this, a neural network based maximum power point tracking (MPPT) controller is designed for the 1.26 kW proton exchange membrane fuel cell (PEMFC). Radial basis function network (RBFN) algorithm is used in the neural network controller to extract the maximum power from PEMFC at different temperature conditions. The performance analysis of the designed MPPT controller is analyzed and compared with a fuzzy logic controller (FLC) in MATLAB/Simulink environment.

16 May 2025 in IEEE Access
Verified
Journal Article
Open access
RDRitesh Dash
Ritesh Dash
ASAnupa Sinha
Anupa Sinha
JKJyotheeswara Reddy Kalvakurthi
Jyotheeswara Reddy Kalvakurthi
CDC. Dhanamjayulu
C. Dhanamjayulu
Innocent KamwaInnocent Kamwa
Innocent Kamwa
The study address the challenge of forecasting per unit energy prices in a microgrid environment consisting of solar and hydro power resources under multi-seasonal variations.Traditional deep learning techniques such as LSTM,GRU and ESN often struggle with non-linear dependencies and volatility in energy market. To overcome these we propose a hybrid framework incorporating Adiabatic Quantum Computing (AQC) for electricity price forecasting. The proposed AQC model encodes-32 system and market related variables into quantum states and applies adiabatic evolution to derive optimized price prediction. Simulation results using real microgrid data set-up based on HIL shows that AQC reduces forecasting error by 17.03% compared to LSTM, 14.29% to GRU and 13.88% to ESN over 24-hrs and 48-hrs horizons. The enhanced accuracy and robustness of the quantum assisted model demonstrates its potential for next generation energy market forecasting and decisions making tool.The entire framework is tested using a synthetic microgrid dataset designed to emulate real-world seasonal and operational dynamics. While this enables controlled validation of the models, the generalizability of the results to real world deployment requires further empirical evaluations on physical microgrid data set.