Young-Ho Gong

Prof. Young-Ho Gong

School of Software, Soongsil University, Seoul, Republic of Korea
orcid

Research Focus & Metrics

Academic Career Length

8Years (2019-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
31 January 2019 in IEEE Transactions on Emerging Topics in Computing
Verified
Journal Article
Closed access
YGYoung-Ho Gong
Young-Ho Gong
JKJoonho Kong
Joonho Kong
SCSung Woo Chung
Sung Woo Chung
Monolithic 3D (M3D) integration has been recently introduced as a viable solution for fine-grained 3D integration. Since the conventional 3D integration uses relatively large micro-scale through-silicon-vias (TSVs), which causes large TSV area overhead, it is not cost-effective for small micro architectural blocks such as L1 caches. On the contrary, the M3D integration offers nano-scale monolithic inter-tier vias (MIVs) which are much smaller than TSVs. Thus, the M3D integration is known to be even feasible for 3D stacking of small micro architectural blocks, which reduces wire length of the blocks, leading to better performance and energy-efficiency. In this paper, we quantify the architectural impact (in terms of performance, power, temperature, and area) of the M3D integration for L1 caches. In our evaluation, the 8-layer stacked M3D L1 caches show 34.1~43.2 percent shorter access time than the 2D L1 cache. As a result, the M3D L1 caches improve the performance of SPEC CPU 2006 applications by 9.9 percent (up to 43.7 percent), on average, compared to the conventional 2D L1 caches. Additionally, the 8-layer stacked M3D L1 caches reduce dynamic energy and leakage power by 58.9 percent ~60.8 percent and 57.9~59.1 percent, respectively, compared to the 2D L1 cache. Additionally, though 3D stacking inevitably causes higher temperature than 2D baseline, since the M3D integration provides better heat dissipation as well as lower power consumption than the conventional TSV-3D, it reduces peak L1 cache temperature by up to 7.6°C, compared to the TSV-3D.

25 January 2021 in IEEE Access
Verified
Journal Article
Open access
YGYoung-Ho Gong
Young-Ho Gong
Monolithic 3D (M3D) integration has been emerged as a promising technology for fine-grained 3D stacking. As the M3D integration offers extremely small dimension of via in a nanometer-scale, it is beneficial for small microarchitectural blocks such as caches, register files, translation look-aside buffers (TLBs), etc. However, since the M3D integration requires low-temperature process for stacked layers, it causes lower performance for stacked transistors compared to the conventional 2D process. In contrast, non-volatile memory (NVM) such as magnetic RAM (MRAM) is originally fabricated at a low temperature, which enables the M3D integration without performance degradation. In this paper, we propose an energy-efficient unified L2 TLB-cache architecture exploiting M3D-based SRAM/MRAM hybrid memory. Since the M3D-based SRAM/MRAM hybrid memory consumes much smaller energy than the conventional 2D SRAM-only memory and 2D SRAM/MRAM hybrid memory, while providing comparable performance, our proposed architecture improves energy efficiency significantly. Especially, as our proposed architecture changes the memory partitioning of the unified L2 TLB-cache depending on the L2 cache miss rate, it maximizes the energy efficiency for parallel workloads suffering extremely high L2 cache miss rate. According to our analysis using PARSEC benchmark applications, our proposed architecture reduces the energy consumption of L2 TLB + L2 cache by up to 97.7% (53.6% on average), compared to the baseline with the 2D SRAM-only memory, with negligible impact on performance. Furthermore, our proposed technique reduces the memory access energy consumption by up to 32.8% (10.9% on average), by reducing memory accesses due to TLB misses.

14 March 2022
Verified
Conference Paper
Closed access
YLYoung Seo Lee
Young Seo Lee
GKGunjae Koo
Gunjae Koo
YGYoung-Ho Gong
Young-Ho Gong
SCSung Woo Chung
Sung Woo Chung
As DRAM process technology scales down and DRAM density continues to grow, DRAM errors have become a primary concern in modern data centers. Typically, data centers have adopted memory systems with a single error correction double error detection (SECDED) code. However, the SECDED code is not sufficient to satisfy DRAM reliability demands as memory systems get more vulnerable. Though the servers in data centers employ strong ECC schemes, such ECC schemes lead to substantial performance and/or storage overhead. In this paper, we propose Stealth ECC, a cost-effective memory protection scheme providing stronger error correctability than the conventional SECDED code, with negligible performance overhead and without storage overhead. Depending on the data-width (either narrow-width or full-width), Stealth ECC adaptively selects ECC schemes. For narrow-width values, Stealth ECC provides multi-bit error correctability by storing more parity bits in MSB side, instead of zeros. Furthermore, with bitwise interleaved data placement between x4 DRAM chips, Stealth ECC is robust to a single DRAM chip error for narrow-width values. On the other hand, for full-width values, Stealth ECC adopts the SECDED code, which maintains DRAM reliability comparable to the conventional SECDED code. As a result, thanks to the reliability improvement of narrow-width values, Stealth ECC enhances overall DRAM reliability, while incurring negligible performance overhead as well as no storage overhead. Our simulation results show that Stealth ECC reduces the probability of system failure (caused by DRAM errors) by 47.9%, on average, with only 0.9% performance overhead compared to the conventional SECDED code.

8 January 2021 in IEEE Embedded Systems Letters
Verified
Journal Article
Closed access
YLYoung Seo Lee
Young Seo Lee
ECEui-Young Chung
Eui-Young Chung
YGYoung-Ho Gong
Young-Ho Gong
SCSung Woo Chung
Sung Woo Chung
Layerwise quantized neural networks (QNNs), which adopt different precisions for weights or activations in a layerwise manner, have emerged as a promising approach for embedded systems. The layerwise QNNs deploy only required number of data bits for the computation (e.g., convolution of weights and activations), which in turn reduces computation energy compared to the conventional QNNs. However, the layerwise QNNs still cause a large amount of energy in the conventional memory systems, since memory accesses are not optimized for the required precision of each layer. To address this problem, we propose Quant-PIM , an energy-efficient processing-in-memory (PIM) accelerator for layerwise QNNs. Quant-PIM selectively reads only required data bits within a data word depending on the precision, by deploying the modified I/O gating logics in a 3-D stacked memory. Thus, Quant-PIM significantly reduces energy consumption for memory accesses. In addition, Quant-PIM improves the performance of layerwise QNNs. When the required precision is half of the weight (or activation) size or less, Quant-PIM reads two data blocks in a single read operation by exploiting the saved memory bandwidth from the selective memory access, thus providing higher compute-throughput. Our simulation results show that Quant-PIM reduces system energy by 39.1%~50.4% compared to the PIM system with 16-bit quantized precision, without accuracy loss.

30 August 2021 in IEEE Access
Verified
Journal Article
Open access
JLJi Heon Lee
Ji Heon Lee
YLYoung Seo Lee
Young Seo Lee
JCJeong Hwan Choi
Jeong Hwan Choi
HAHussam Amrouch
Hussam Amrouch
JKJoonho Kong
Joonho Kong
SCSung Woo Chung
Sung Woo Chung
Monolithic 3D (M3D) integration reduces the wire length, which eventually improves energy efficiency and performance compared to 2D integration. However, 3D integration inevitably causes higher on-chip temperature compared to 2D integration due to the increased power density as well as worse heat dissipation. The high on-chip temperature may offset the benefits of the M3D microprocessors due to the following reasons: 1) high on-chip temperature increases leakage power, which degrades energy efficiency. 2) the actual clock frequency is limited at run-time by frequent dynamic thermal management (DTM) invocations. In this paper, for the first time, we explore the thermal feasibility (whether it is possible to achieve high energy efficiency and performance without exceeding threshold temperature) of the M3D microprocessors depending on cooling solutions. For the thermal feasibility study, we construct an integrated framework to investigate the thermal behaviors and thermal feasibility of different types of microprocessors (M3D, 2D, and through-silicon-via based 3D (TSV-3D)) with different cooling solutions. Our thermal-aware evaluation results show that the best configuration of the M3D microprocessors reduces average energy consumption by 27.6% compared to the 2D microprocessor at an iso-frequency (4.0GHz). In addition, at the highest clock frequencies satisfying both design and thermal constraints, the best configuration of the M3D microprocessors improves average system performance by 25.1% and 26.0% compared to the 2D and TSV-3D microprocessors, respectively.

8 March 2021 in Electronics
Verified
Journal Article
Open access
PDF file
JCJeong Hwan Choi
Jeong Hwan Choi
YGYoung-Ho Gong
Young-Ho Gong
SCSung Woo Chung
Sung Woo Chung
Binary neural networks (BNNs) are adequate for energy-constrained embedded systems thanks to binarized parameters. Several researchers have proposed the compute-in-memory (CiM) SRAMs for XNOR-and-accumulation computations (XACs) in BNNs by adding additional transistors to the conventional 6T SRAM, which reduce the latency and energy of the data movements. However, due to the additional transistors, the CiM SRAMs suffer from larger area and longer wires than the conventional 6T SRAMs. Meanwhile, monolithic 3D (M3D) integration enables fine-grained 3D integration, reducing the 2D wire length in small functional units. In this paper, we propose a BNN accelerator (BNN_Accel), composed of a 9T CiM SRAM (CiM_SRAM), input buffer, and global periphery logic, to execute the computations in the binarized convolution layers of BNNs. We also propose CiM_SRAM with the subarray-level M3D integration (as well as the transistor-level M3D integration), which reduces the wire latency and energy compared to the 2D planar CiM_SRAM. Across the binarized convolution layers, our simulation results show that BNN_Accel with the 4-layer CiM_SRAM reduces the average execution time and energy by 39.9% and 23.2%, respectively, compared to BNN_Accel with the 2D planar CiM_SRAM.