This paper reports a study of the influence of outdoor natural aging on paint coatings applied to the back of three commercial solar glass mirrors (A1, C2, and D2) under two different exposure environments (marine and desert) in Morocco for a period of about three years. The aging assessment was carried out through colorimetric measurements and FTIR-ATR (Attenuated total reflection-Fourier transform infrared) analyses of the top coat paints. The obtained results demonstrate that the tested coating system had a high resistance at the desert site. Under the desert environment, no obvious changes to the coating occurred after 350 days. However, at the marine site, some color changes were detected, and the coating got yellow and more matte, especially for mirror A1. FTIR-ATR analyses have indicated many modifications in the intensity of many bonds of infrared spectra especially for paint of this mirror type (A1). This chemical degradation is not only due to UV degradation but also related to many factors, such as humidity, salinity, and rainfall. This finding was concluded after the faster degradation observed on samples exposed at the marine site. The present study confirms the need to use different exposure environments for testing the limits of new protective systems for solar glass mirrors rather than using only the real service conditions. Finally, accelerated tests are necessary for understanding the effect of each degrading parameter and their results should be compared to outdoor tests data for a complete analysis of coatings durability.
Accelerated aging experiments on solar reflectors allow for a more accurate prediction of the materials’ lifespan in a shorter period of time comparing to a study on real-Concentrated solar power (CSP) sites. Accelerated aging tests help to identify which degradations are most likely to occur under the application conditions by assessing the component’s sensitivity to various stress factors. To meet the needs of manufacturers in terms of accelerated testing, accelerated aging standards must be developed in most applications. Therefore, research and experiments must be conducted to determine appropriate techniques and therefore contribute to the standardization process. CSP is a field that entails a lot of work. The solar mirrors aging standards are still subject of research in the CSP field. They’ve all been developed or altered for use in other fields like photovoltaics. However, the outcomes of these aging tests are not always accurate or representative. In addition, the development of new materials like antisoiling coatings make the standardization process more challenging. This work aims to highlight the interest of combining accelerated erosion with other stress factors in order to get more representative results that can contribute to the standardization protocols of accelerated aging tests in the CSP for coated and uncoated solar reflectors.
To be able to function optimally, CSP technology requires a strong direct sunlight. This constraint limits the potential implantation areas to mainly arid envir