This paper reports a study of the influence of outdoor natural aging on paint coatings applied to the back of three commercial solar glass mirrors (A1, C2, and D2) under two different exposure environments (marine and desert) in Morocco for a period of about three years. The aging assessment was carried out through colorimetric measurements and FTIR-ATR (Attenuated total reflection-Fourier transform infrared) analyses of the top coat paints. The obtained results demonstrate that the tested coating system had a high resistance at the desert site. Under the desert environment, no obvious changes to the coating occurred after 350 days. However, at the marine site, some color changes were detected, and the coating got yellow and more matte, especially for mirror A1. FTIR-ATR analyses have indicated many modifications in the intensity of many bonds of infrared spectra especially for paint of this mirror type (A1). This chemical degradation is not only due to UV degradation but also related to many factors, such as humidity, salinity, and rainfall. This finding was concluded after the faster degradation observed on samples exposed at the marine site. The present study confirms the need to use different exposure environments for testing the limits of new protective systems for solar glass mirrors rather than using only the real service conditions. Finally, accelerated tests are necessary for understanding the effect of each degrading parameter and their results should be compared to outdoor tests data for a complete analysis of coatings durability.
The sodium super ionic conductor (NASICON) structured LiTi2(PO4)3 (LTP) has been developed as electrode material for Li-ion batteries (LIBs) with promising electrochemical performance, owing to its outstanding structural stability and rapid lithium-ion diffusion. Nevertheless, challenges still exist, especially the rapid capacity fading caused by the low electronic conductivity of LTP-NASICON material. Recently, the hydrothermal method has emerged as an important technique for the production of diverse nano-electrode materials due to its low preparation temperature, high phase purity, and well-controlled morphology and crystallinity. Herein, we report, for the first time at low-moderate temperatures, an advanced hydrothermal synthesis of LTP-coated reduced graphene oxide (LTP@rGO) particles that includes the growth of LTP particles while simultaneously coating them with rGO material. The LTP offers a discharge specific capacity of 84 mAh/g, while the LTP@rGO delivers a discharge capacity of 147 mAh/g, both with a coulombic efficiency of 99.5% after 100 cycles at a 1C rate.
All-solid-state batteries have garnered significant attention due to their potential to exceed the energy density of conventional lithium-ion batteries, particularly when alloying-based materials or lithium metal anodes are used. However, achieving compatibility with lithium metal remains a persistent bottleneck. In this study, we shed light on the potential of SnHPO3 tin phosphite and Ni3.4Sn4 intermetallic as novel conversion/alloying anode materials for all-solid-state lithium batteries using Li6PS5Cl as the solid electrolyte. The two Sn-based active materials were nanostructured by ball-milling to demonstrate considerable promise for application in all-solid-state half-cells. Galvanostatic cycling at room temperature revealed electrochemical behavior based on conversion/alloying reactions akin to those observed in conventional lithium-ion batteries. Promisingly, both materials exhibited satisfying electrochemical stability, with coulombic efficiencies exceeding 97%. These findings indicate that Li6PS5Cl solid electrolyte is compatible with Sn-based alloying anodes.
1 September 2025 in Journal of Physics and Chemistry of Solids