There has been a renewed interest in applying multiobjective (MO) optimization methods to a number of problems in the physical sciences, including to rf structure design. The results of these optimizations generate large datasets, which makes visualizing the data and selecting individual solutions difficult. Using the generated results, Pareto fronts can be found giving the trade-off between different objectives, allowing one to utilize this key information in design decisions. Although various visualization techniques exist, it can be difficult to know which technique is appropriate and how to apply them successfully to the problem at hand. First, we present the setup and execution of MO optimizations of one standing wave and one traveling wave accelerating cavity, including constraint handling and an algorithm comparison. In order to understand the generated Pareto frontiers, we discuss several visualization techniques, applying them to the problem, and give the benefits and drawbacks of each. We found that the best techniques involve clustering the resulting data first to narrow down the possible choices and then using multidimensional visualization methods such as parallel coordinate plots and decision maps to view the clustered results and select individual solutions. Finally, we give some examples of the application of these methods and the cavities selected based on arbitrary design requirements.
17 July 2020 in Physical Review Accelerators and Beams
Recirculating energy recovery linacs are a promising technology for delivering high power particle beams () while only requiring low power () rf sources. This is achieved by decelerating the used bunches and using the energy they deposit in the accelerating structures to accelerate new bunches. We present studies of the impact of the bunch packet filling pattern on the performance of the accelerating rf system. We perform rf beam loading simulations under various noise levels and beam loading phases with different injection schemes. We also present a mathematical description of the rf system during the beam loading, which can identify optimal beam filling patterns under different conditions. The results of these studies have major implications for design constraints for future energy recovery linacs, by providing a quantitative metric for different machine designs and topologies.
23 June 2021 in Physical Review Accelerators and Beams
Beam breakup instability is a potential issue for all particle accelerators and is often the limiting factor for the maximum beam current that can be achieved. This is particularly relevant for energy recovery linacs (ERLs)with multiple passes where a relatively small amount of charge can result in a large beam current. Recent studies have shown that the choice of filling pattern and recirculation scheme for a multipass energy recovery linac can drastically affect the interactions between the beam and rf system. In this paper, we further explore this topic to study how filling patterns affect the beam breakup instability and how this can allow us to optimize the design in order to minimize this effect. We present a theoretical model of the beam-rf interaction as well as numerical modeling and show that the threshold current can vary by a factor of 5, and potentially, even more, depending on the machine design parameters. Therefore a judicious choice of filling pattern can greatly increase the onset of beam breakup, expanding the utility of future ERLs.
23 January 2025 in Physical Review Accelerators and Beams
The maximum achievable beam current in an energy recovery linac (ERL) is often constrained by beam breakup (BBU) instability. Our previous research highlighted that filling patterns have a substantial impact on BBU instabilities in multipass ERLs. In this study, we extend our investigation to the eight-cavity model of the Powerful ERL for Experiment (PERLE). We evaluate its requirements for damping cavity higher order modes (HOMs) and propose optimal filling patterns and bunch timing strategies. Our findings reveal a significant new insight: while filling patterns are crucial, the timing of bunches also plays a critical role in mitigating HOM beam loading and BBU instability. This previously underestimated factor is essential for effective BBU control. We estimated the PERLE threshold current using both analytical and numerical models, incorporating the designed PERLE HOM dampers. During manufacturing, HOM frequencies are expected to vary slightly. Our study found no significant difference in BBU suppression for relative rms frequency jitters of 0.001, 0.002, and 0.005 for the same HOM. Introducing a jitter of 0.001 into our models, we found that the dampers effectively suppressed BBU instability, achieving a threshold current an order of magnitude higher than the design requirement. Our results offer new insights into ERL BBU beam dynamics and have important implications for the design of future ERLs.
16 August 2021 in Physical Review Accelerators and Beams
Although accelerator technology has matured sufficiently, state-of-the-art x-ray linacs for radiotherapy and cargo-scanning capture merely 30%–50% of the electrons from a thermionic cathode, requiring a higher cathode current and leaving uncaptured electrons to cause problems such as back bombardment on the cathode leading to a shortening of cathode life. Any solution to increase capture should be effective, simple, reliable, compact, and low cost in order to be adopted by the industry. To address this, we present the design of a 6 MeV high capture efficiency S-band electron linac that captures 90% of the initial dc beam. This linac does not require any extra parts that would increase the cost as the high efficiency is achieved via a low-field amplitude in the first bunching cell to decrease the number of back-streaming electrons, to velocity bunch the electron beam, and recapture back-streaming electrons. Under the low field amplitude, any electrons launched at decelerating phases travel backward with low speeds, thus most of them can catch the next rf cycle, and get reaccelerated/recaptured. As the electron speed is low, the cell length is also shorter than existing linacs. Such a short field is achieved by the use of asymmetric cells with differential coupling to the side-coupled cells. Our novel design has implications for all commercial high current thermionic gun linacs for increasing beam current and increasing cathode lifetime.
1 November 2017 in Review of Scientific Instruments
We describe a compact THz-pump and X-ray-probe beamline, based on an electron linac, for ultrafast time-resolved diffraction applications. Two high-energy electron (γ > 50) bunches, 5 ns apart, impinge upon a single-foil or multifoil radiator and generate THz radiation and X-rays simultaneously. The THz pulse from the first bunch is synchronized to the X-ray beam of the second bunch by using an adjustable optical delay of a THz pulse. The peak power of THz radiation from the multifoil radiator is estimated to be 0.14 GW for a 200 pC well-optimized electron bunch. GEANT4 simulations show that a carbon foil with a thickness of 0.5–1.0 mm has the highest yield of 10–20 keV hard X-rays for a 25 MeV beam, which is approximately 103 photons/(keV pC-electrons) within a few degrees of the polar angle. A carbon multifoil radiator with 35 foils (25 μm thick each) can generate close to 103 hard X-rays/(keV pC-electrons) within a 2° acceptance angle. With 200 pC charge and a 100 Hz repetition rate, we can generate 107 X-rays per 1 keV energy bin per second or 105 X-rays per 1 keV energy bin per pulse. The longitudinal time profile of an X-ray pulse ranges from 400 to 600 fs depending on the acceptance angle. The broadening of the time duration of an X-ray pulse is observed owing to its diverging effect. A double-crystal monochromator will be used to select and transport the desired X-rays to the sample. The heating of the radiators by an electron beam is negligible because of the low beam current.