Programmable metasurfaces have garnered significant attention as they confer unprecedented control over the electromagnetic (EM) response of any surface. Such feature has given rise to novel design paradigms such as Software-Defined Metamaterials (SDM) and Reconfigurable Intelligent Surfaces (RIS) with multiple groundbreaking applications. However, the development of programmable metasurfaces tailored to the particularities of a potentially large application pool becomes a daunting task because the design space becomes remarkably large. This paper aims to ease the design process by proposing a methodology that employs a semi-analytical formulation to model the response of a metasurface and, then, derives performance scaling trends as functions of a representative set of design and application-specific variables. Although the methodology is amenable to any EM functionality, this paper explores its use for the case of beam steering at 26 GHz for 5G applications. Conventional beam steering metrics are evaluated as functions of the unit cell size, number of unit cell states, and metasurface size for different incidence and reflection angles. It is shown that metasurfaces 5λ×5λ or larger with unit cells of λ/3 and four unit cell states ensure good performance overall. Further, it is demonstrated that performance degrades significantly for angles larger than θ>60o and that, to combat this, extra effort is needed in the development of the unit cell. These performance trends, when combined with power and cost models, will pave the way to optimal metasurface dimensioning.

Recent years have seen the emergence of programmable metasurfaces, where the user can modify the electromagnetic (EM) response of the device via software. Adding reconfigurability to the already powerful EM capabilities of metasurfaces opens the door to novel cyber-physical systems with exciting applications in domains such as holography, cloaking, or wireless communications. This paradigm shift, however, comes with a non-trivial increase of the complexity of the metasurfaces that will pose new reliability challenges stemming from the need to integrate tuning, control, and communication resources to implement the programmability. While metasurfaces will become prone to failures, little is known about their tolerance to errors. To bridge this gap, this paper examines the reliability problem in programmable metamaterials by proposing an error model and a general methodology for error analysis. To derive the error model, the causes and potential impact of faults are identified and discussed qualitatively. The methodology is presented and exemplified for beam steering, which constitutes a relevant case for programmable metasurfaces. Results show that performance degradation depends on the type of error and its spatial distribution and that, in beam steering, error rates over 20% can still be considered acceptable.

Reconfigurable Intelligent Surfaces (RIS) are well established as a promising solution to the blockage problem in millimeter-wave (mm-wave) and terahertz (THz) communications, envisioned to serve demanding networking applications, such as 6G and vehicular. HyperSurfaces (HSF) is a revolutionary enabling technology for RIS, complementing Software Defined Metasurfaces (SDM) with an embedded network of controllers to enhance intelligence and autonomous operation in wireless networks. In this work, we consider feedback-based autonomous reconfiguration of the HSF controller states to establish a reliable communication channel between a transmitter and a receiver via programmable reflection on the HSF when Line-of-sight (LoS) between them is absent. The problem is to regulate the angle of reflection on the metasurface such that the power at the receiver is maximized. Extremum Seeking Control (ESC) is employed with the control signals generated mapped into appropriate metasurface coding signals which are communicated to the controllers via the embedded controller network (CN). This information dissemination process incurs delays which can compromise the stability of the feedback system and are thus accounted for in the performance evaluation. Extensive simulation results demonstrate the effectiveness of the proposed method to maximize the power at the receiver within a reasonable time even when the latter is mobile. The spatiotemporal nature of the traffic for different sampling periods is also characterized.

As the current standardization for the 5G networks nears completion, work towards understanding the potential technologies for the 6G wireless networks is already underway. One of these potential technologies for the 6G networks is reconfigurable intelligent surfaces. They offer unprecedented degrees of freedom towards engineering the wireless channel, i.e., the ability to modify the characteristics of the channel whenever and however required. Nevertheless, such properties demand that the response of the associated metasurface is well understood under all possible operational conditions. While an understanding of the radiation pattern characteristics can be obtained through either analytical models or full-wave simulations, they suffer from inaccuracy and extremely high computational complexity, respectively. Hence, in this paper, we propose a neural network-based approach that enables a fast and accurate characterization of the metasurface response. We analyze multiple scenarios and demonstrate the capabilities and utility of the proposed methodology. Concretely, we show that this method can learn and predict the parameters governing the reflected wave radiation pattern with an accuracy of a full-wave simulation (98.8–99.8%) and the time and computational complexity of an analytical model. The aforementioned result and methodology will be of specific importance for the design, fault tolerance, and maintenance of the thousands of reconfigurable intelligent surfaces that will be deployed in the 6G network environment.

The reconfigurable intelligent surface is a promising technology for the manipulation and control of wireless electromagnetic signals. In particular, it has the potential to provide significant performance improvements for wireless networks. However, to do so, a proper reconfiguration of the reflection coefficients of unit cells is required, which often leads to complex and expensive devices. To amortize the cost, one may share the system resources among multiple transmitters and receivers. In this paper, we propose an efficient reconfiguration technique providing control over multiple beams independently. Compared to time-consuming optimization techniques, the proposed strategy utilizes an analytical method to configure the surface for multi-beam radiation. This method is easy to implement, effective and efficient since it only requires phase reconfiguration. We analyze the performance for indoor and outdoor scenarios, given the broadcast mode of operation. The aforesaid scenarios encompass some of the most challenging scenarios that wireless networks encounter. We show that our proposed technique provisions sufficient improvements in the observed channel capacity when the receivers are close to the surface in the indoor office environment scenario. Further, we report a considerable increase in the system throughput given the outdoor environment.