Optics measurements at the LHC are mainly based on turn-by-turn signal from hundreds of beam position monitors (BPMs). Faulty BPMs produce erroneous signal causing unreliable computation of optics functions. Therefore, detection of faulty BPMs prior to optics computation is crucial for adequate optics analysis. Most of the faults can be removed by applying traditional cleaning techniques. However, optics functions reconstructed from the cleaned turn-by-turn data systematically exhibit a few nonphysical values which indicate the presence of remaining faulty BPMs. A novel method based on the Isolation Forest algorithm has been developed and applied in LHC operation, allowing to significantly reduce the number of undetected faulty BPMs, thus improving the optics measurements. This report summarizes the operational results and discusses the evaluation of the developed method on simulations, including extensive studies and optimization of the preexisting cleaning technique and verification of a new method in terms of coupling measurement. The advantages of the chosen algorithm compared to some other unsupervised learning techniques are also discussed.
28 June 2022 in Physical Review Accelerators and Beams
Tuning machine parameters of particle accelerators is a repetitive and time-consuming task that is challenging to automate. While many off-the-shelf optimization algorithms are available, in practice their use is limited because most methods do not account for safety-critical constraints in each iteration, such as loss signals or step-size limitations. One notable exception is safe Bayesian optimization, which is a data-driven tuning approach for global optimization with noisy feedback. We propose and evaluate a step-size limited variant of safe Bayesian optimization on two research facilities of the PSI: (a) the SwissFEL and (b) HIPA. We report promising experimental results on both machines, tuning up to 16 parameters subject to 224 constraints.
The beam interruptions (interlocks) of particle accelerators, despite being necessary safety measures, lead to abrupt operational changes and a substantial loss of beam time. A novel time series classification approach is applied to decrease beam time loss in the High-Intensity Proton Accelerator complex by forecasting interlock events. The forecasting is performed through binary classification of windows of multivariate time series. The time series are transformed into Recurrence Plots which are then classified by a Convolutional Neural Network, which not only captures the inner structure of the time series but also uses the advances of image classification techniques. Our best-performing interlock-to-stable classifier reaches an Area under the ROC Curve value of compared to of a Random Forest model, and it can potentially reduce the beam time loss by s per interlock.
2 January 2020 in Physical Review Accelerators and Beams
Type-II superconductors, like the used in the new HL–LHC quadrupole triplet and 11 T dipoles or FCC dipoles, are known to show an unstable behavior during magnetic-field ramps. This paper presents an analysis of the possible effects on the beam dynamics of this behavior of the magnets, with a focus on emittance blow-up.
6 April 2020 in Physical Review Accelerators and Beams
As the beams at the interaction points (IPs) of circular colliders are pushed toward smaller sizes, the correction of the magnetic field errors in high-β regions become increasingly important, but also challenging. This paper presents an algorithm developed to compute automatically local corrections. This algorithm has been successfully used in the LHC and in simulations of the HL-LHC to establish tolerances for the magnetic errors. The limitations of the current β* measurement technique (K-modulation) are studied, together with alternative techniques for β* control: computing the minimum β near the IP using the betatron phase measured with new instrumentation and locating the beam waist via luminosity scans. This push toward smaller beam sizes also requires large β-functions in the arcs that enhance local errors currently negligible. Experimental results of a way of correcting this new type of local errors using orbit bumps in sextupoles is also presented. These studies forecast a drastic change in the LHC commissioning strategy to be applied in the HL-LHC for needing luminosity measurements in intermediate stages.
12 February 2021 in Physical Review Accelerators and Beams
The achromatic telescopic squeezing (ATS) scheme has brought an essential conceptual foundation to the HL-LHC project, making possible a strong and clean (achromatic) reduction of , an important parameter with respect to which several HL-LHC sub-systems were dimensioned (e.g., the 150 mm aperture of the new inner triplet quadrupoles) or justified (crab-cavities for mitigating the geometric luminosity loss factor at low and subsequent large crossing-angle). The basic mechanics of the scheme is shortly reminded, highlighting as well some of its by-products (Landau damping, long-range beam-beam mitigation with octupoles), and a recent improvement which made possible an early, but still partial, implementation of ATS optics in the LHC for the 2017 and 2018 LHC physics runs. The main focus of the paper will be on the experimental validation of the scheme, via the development of dedicated machine configurations and high-intensity beam tests which took place in Run 2. The paper will conclude on the configuration presently in mind to operate the LHC during its third exploitation period (Run 3), while trying to ensure a smooth enough transition toward the HL-LHC, in terms of optics, beam parameters, and dedicated beam manipulations (-leveling).