Alessio Corazza

Dr. Alessio Corazza

orcid

Research Focus & Metrics

Academic Career Length

22Years (2005-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
GMGabriele Messina
Gabriele Messina
ACAlessandro Della Camera
Alessandro Della Camera
PFPietro Ferraro
Pietro Ferraro
DADavide Amodeo
Davide Amodeo
ACAlessio Corazza
Alessio Corazza
GCGabriele Cevenini
Gabriele Cevenini
The coronavirus SARS-CoV-2 pandemic has become a global health burden. Surface sanitation is one of the key points to reduce the risk of transmission both in healthcare and other public spaces. UVC light is already used in hospital and laboratory infection control, and some recent studies have shown its effectiveness on SARS-CoV-2. An innovative UV chip technology, described in Part I of this study, has recently appeared able to overcome the limits of old lamps and is proposed as a valid alternative to LEDs. This study was designed to test the virucidal activity on SARS-CoV-2 of a device based on the new UV chip technology. Via an initial concentration of virus suspension of 107.2 TCID50/mL, the tests revealed a viral charge reduction of more than 99.9% after 3 min; the maximum detectable attenuation value of Log10 = 5.7 was measured at 10 min of UV exposure.

1 October 2006
Verified
Conference Paper
Closed access
ACAlessio Corazza
Alessio Corazza
SGS. Giorgi
S. Giorgi
CBC. Boffito
C. Boffito
VMV. Massaro
V. Massaro
DCD. Caccia
D. Caccia
In the field of discharge lamps many efforts are focused on improving qualities and performances of the devices. It is well known that gaseous impurities, possibly present inside the burner and inside the outer bulb of high intensity discharge (HID) lamps, are one of the main causes of the deterioration of their performances. Usually getter materials are adopted to absorb the gaseous impurities that may be generated by the residues of lamp fabrication process or that are released during lamp operation. These can be efficiently removed by means of a simple getter component, so as to create and maintain the very clean atmosphere necessary to assure high quality characteristics of the lamp for all its life. Getters are used in HID lamps with outer bulbs both under vacuum and with nitrogen atmosphere; in this second type of lamps it is necessary that the getter works properly without being affected by, or interfering with, the jacket filling gas. The getter material must be able to sorb various gaseous species generated inside the lamp envelope, such as hydrogen, water vapour, carbon monoxide and hydrocarbons. In this paper we have presented and discussed properties and sorption characteristics of the main getter materials adopted in HID lamps, such as the Zr-Al, Zr-Fe and Zr-Co-rare earths alloys. The sorption performances of the materials were measured in experimental systems simulating possible lamp conditions. Experiments were carried out to study the ability of the materials to capture hydrogen that is the most deleterious gaseous contaminant in discharge lamps. Moreover, in order to understand the complex sorption mechanisms that take place on the getters when different gaseous impurities are coexisting inside the lamps, specific tests were performed to determine the simultaneous sorption of different gas species, such as sorption of hydrogen and nitrogen, hydrogen and carbon monoxide, hydrogen and carbon dioxide

15 December 2020 in Proceedings
Verified
Conference Paper
Open access
PDF file
LMLuca Mauri
Luca Mauri
APAnna Della Porta
Anna Della Porta
ACAlessio Corazza
Alessio Corazza
MMMarco Moraja
Marco Moraja
Getter materials are technically proven and industrially well-implemented solutions for maintaining a vacuum inside electronic devices to assure long lifetimes and proper operating conditions. The pressure requirements of some hermetically packaged microelectromechanical systems (MEMS) devices, such as gyroscopes, accelerometers, infrared (IR) bolometers, and digital mirrors, are very stringent. The internal pressure can be as low as in the 10−3 mbar range. Due to the desorption phenomena of gaseous species from the internal surfaces, the vacuum inside such hermetically sealed electronic devices tends to degrade over time and, in the worst case, can affect the proper operation of the device. The integration of a special nanostructured getter film is an effective way to preserve and guarantee the performance of such devices. In addition to the getter material, there is also the need to develop and customize analytical techniques for post-process vacuum quality control and reliability checks of hermetic bonding, which are extremely important for the assessment of a device’s overall performance, lifetime, and manufacturing process yield.

19 August 2005 in Journal of Physics D: Applied Physics
Verified
Journal Article
Closed access
PDF file
BMB J de Maagt
B J de Maagt
ACAlessio Corazza
Alessio Corazza
In high intensity discharge (HID) lamps getters are generally used to remove gaseous impurities that otherwise may have negative effects on the lamp characteristics. Hydrogen, in particular, is a dangerous impurity because it can induce ignition problems and, in lamps with a quartz burner, it can diffuse from the outer bulb into the arc tube and cause early corrosion of the quartz. Recently a new getter, suitable to work in compact HID lamps operated at high temperatures, has been developed: this getter is an appropriate solution to sorb hydrogen at high working temperatures in lamps where the use of a conventional getter is inadequate because of its small capacity for gettering hydrogen, its relatively high hydrogen equilibrium pressure and problems associated with the evaporation of getter and container material. The newly developed getter, named high temperature getter (HTG), is based on a special alloy enclosed in a niobium container. The new alloy is very effective in sorbing hydrogen in the temperature region of 500–900°C. It has been proved that by introducing the HTG the processing of high-wattage compact HID lamps can be simplified and a better lamp performance can be obtained.

16 November 2020 in Journal of Materials Science: Materials in Electronics
Verified
Journal Article
Closed access
PDF file
CSCalogero Sciascia
Calogero Sciascia
GCGiovanni Colombo
Giovanni Colombo
SZStefano Zilio
Stefano Zilio
GSGianni Santella
Gianni Santella
ACAlessio Corazza
Alessio Corazza

1 January 2023 in International Symposium on Microelectronics
Verified
Journal Article
Open access
PDF file
LMLuca Mauri
Luca Mauri
GZGiovanni Zafarana
Giovanni Zafarana
EREnea Rizzi
Enea Rizzi
ACAlessio Corazza
Alessio Corazza
Hermetic packaging is a well-established technology used for sealing electronic and optoelectronic devices. A reliable and enabling way to preserve the proper stable atmosphere conditions in hermetic packages is the integration of engineered getter solutions, specifically designed for the characteristics of different packaged systems. Getter solutions may vary from sintered, compressed or sputtered metallic alloys for vacuum sealed packages to dispensable hybrid organic-inorganic materials for gas back filled devices. The paper will present the main features of getter materials suitable for different type of packages and will show their efficiency in absorbing detrimental gases in the devices.