Regular inspection of transmission lines is an essential work, which has been implemented by either labor intensive or very expensive approaches. 3D reconstruction could be an alternative solution to satisfy the need for accurate and low cost inspection. This paper exploits the use of an unmanned aerial vehicle (UAV) for outdoor data acquisition and conducts accuracy assessment tests to explore potential usage for offsite inspection of transmission lines. Firstly, an oblique photogrammetric system, integrating with a cheap double-camera imaging system, an onboard dual-frequency GNSS (Global Navigation Satellite System) receiver and a ground master GNSS station in fixed position, is designed to acquire images with ground resolutions better than 3 cm. Secondly, an image orientation method, considering oblique imaging geometry of the dual-camera system, is applied to detect enough tie-points to construct stable image connection in both along-track and across-track directions. To achieve the best geo-referencing accuracy and evaluate model measurement precision, signalized ground control points (GCPs) and model key points have been surveyed. Finally, accuracy assessment tests, including absolute orientation precision and relative model precision, have been conducted with different GCP configurations. Experiments show that images captured by the designed photogrammetric system contain enough information of power pylons from different viewpoints. Quantitative assessment demonstrates that, with fewer GCPs for image orientation, the absolute and relative accuracies of image orientation and model measurement are better than 0.3 and 0.2 m, respectively. For regular inspection of transmission lines, the proposed solution can to some extent be an alternative method with competitive accuracy, lower operational complexity and considerable gains in economic cost.

3D semantic labeling is a fundamental task in airborne laser scanning (ALS) point clouds processing. The complexity of observed scenes and the irregularity of point distributions make this task quite challenging. Existing methods rely on a large number of features for the LiDAR points and the interaction of neighboring points, but cannot exploit the potential of them. In this paper, a convolutional neural network (CNN) based method that extracts the high-level representation of features is used. A point-based feature image-generation method is proposed that transforms the 3D neighborhood features of a point into a 2D image. First, for each point in the ALS data, the local geometric features, global geometric features and full-waveform features of its neighboring points within a window are extracted and transformed into an image. Then, the feature images are treated as the input of a CNN model for a 3D semantic labeling task. Finally, to allow performance comparisons with existing approaches, we evaluate our framework on the publicly available datasets provided by the International Society for Photogrammetry and Remote Sensing Working Groups II/4 (ISPRS WG II/4) benchmark tests on 3D labeling. The experiment results achieve 82.3% overall accuracy, which is the best among all considered methods.

UAVs have become one of the widely used remote sensing platforms and played a critical role in the construction of smart cities. However, due to the complex environment in urban scenes, secure and accurate data acquisition brings great challenges to 3D modeling and scene updating. Optimal trajectory planning of UAVs and accurate data collection of onboard cameras are non-trivial issues in urban modeling. This study presents the principle of optimized views photogrammetry and verifies its precision and potential in large-scale 3D modeling. Different from oblique photogrammetry, optimized views photogrammetry uses rough models to generate and optimize UAV trajectories, which is achieved through the consideration of model point reconstructability and view point redundancy. Based on the principle of optimized views photogrammetry, this study first conducts a precision analysis of 3D models by using UAV images of optimized views photogrammetry and then executes a large-scale case study in the urban region of Qingdao city, China, to verify its engineering potential. By using GCPs for image orientation precision analysis and TLS (terrestrial laser scanning) point clouds for model quality analysis, experimental results show that optimized views photogrammetry could construct stable image connection networks and could achieve comparable image orientation accuracy. Benefiting from the accurate image acquisition strategy, the quality of mesh models significantly improves, especially for urban areas with serious occlusions, in which 3 to 5 times of higher accuracy has been achieved. Besides, the case study in Qingdao city verifies that optimized views photogrammetry can be a reliable and powerful solution for the large-scale 3D modeling in complex urban scenes.